📄 pc_init.h
字号:
/* * Copyright (c) Eicon Networks, 2002. * This source file is supplied for the use with Eicon Networks range of DIVA Server Adapters. * Eicon File Revision : 2.1 * This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version. * This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY OF ANY KIND WHATSOEVER INCLUDING ANY implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. * You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * */#ifndef PC_INIT_H_#define PC_INIT_H_/*------------------------------------------------------------------*//* Initialisation parameters for the card 0x0008 <byte> TEI 0x0009 <byte> NT2 flag 0x000a <byte> Default DID length 0x000b <byte> Disable watchdog flag 0x000c <byte> Permanent connection flag 0x000d <byte> Bit 3-8: L1 Hunt Group/Tristate 0x000d <byte> Bit 1: QSig small CR length if set to 1 0x000d <byte> Bit 2: QSig small CHI length if set to 1 0x000e <byte> Bit 1-3: Stable L2, 0=OnDemand,1=NoDisc,2=permanent 0x000e <byte> Bit 4: NT mode 0x000e <byte> Bit 5: QSig Channel ID format 0x000e <byte> Bit 6: QSig Call Forwarding Allowed Flag 0x000e <byte> Bit 7: Disable AutoSPID Flag 0x000f <byte> No order check flag 0x0010 <byte> Force companding type:0=default,1=a-law,2=u-law 0x0012 <byte> Low channel flag 0x0013 <byte> Protocol version 0x0014 <byte> CRC4 option:0=default,1=double_frm,2=multi_frm,3=auto 0x0015 <byte> Bit 0: NoHscx30, Bit 1: Loopback flag, Bit 2: ForceHscx30 0x0016 <byte> DSP info 0x0017-0x0019 Serial number 0x001a <byte> Card type 0x0020 <string> OAD 0 0x0040 <string> OSA 0 0x0060 <string> SPID 0 (if not T.1) 0x0060 <struct> if T.1: Robbed Bit Configuration 0x0060 length (8) 0x0061 RBS Answer Delay 0x0062 RBS Config Bit 3, 4: 0 0 -> Wink Start 1 0 -> Loop Start 0 1 -> Ground Start 1 1 -> reserved Bit 5, 6: 0 0 -> Pulse Dial -> Rotary 1 0 -> DTMF 0 1 -> MF 1 1 -> reserved 0x0063 RBS RX Digit Timeout 0x0064 RBS Bearer Capability 0x0065-0x0069 RBS Debug Mask 0x0080 <string> OAD 1 0x00a0 <string> OSA 1 0x00c0 <string> SPID 1 0x00e0 <w-element list> Additional configuration*/#define PCINIT_END_OF_LIST 0x00#define PCINIT_MODEM_GUARD_TONE 0x01#define PCINIT_MODEM_MIN_SPEED 0x02#define PCINIT_MODEM_MAX_SPEED 0x03#define PCINIT_MODEM_PROTOCOL_OPTIONS 0x04#define PCINIT_FAX_OPTIONS 0x05#define PCINIT_FAX_MAX_SPEED 0x06#define PCINIT_MODEM_OPTIONS 0x07#define PCINIT_MODEM_NEGOTIATION_MODE 0x08#define PCINIT_MODEM_MODULATIONS_MASK 0x09#define PCINIT_MODEM_TRANSMIT_LEVEL 0x0a#define PCINIT_FAX_DISABLED_RESOLUTIONS 0x0b#define PCINIT_FAX_MAX_RECORDING_WIDTH 0x0c#define PCINIT_FAX_MAX_RECORDING_LENGTH 0x0d#define PCINIT_FAX_MIN_SCANLINE_TIME 0x0e#define PCINIT_US_EKTS_CACH_HANDLES 0x0f#define PCINIT_US_EKTS_BEGIN_CONF 0x10#define PCINIT_US_EKTS_DROP_CONF 0x11#define PCINIT_US_EKTS_CALL_TRANSFER 0x12#define PCINIT_RINGERTONE_OPTION 0x13#define PCINIT_CARD_ADDRESS 0x14#define PCINIT_FPGA_FEATURES 0x15#define PCINIT_US_EKTS_MWI 0x16#define PCINIT_MODEM_SPEAKER_CONTROL 0x17#define PCINIT_MODEM_SPEAKER_VOLUME 0x18#define PCINIT_MODEM_CARRIER_WAIT_TIME 0x19#define PCINIT_MODEM_CARRIER_LOSS_TIME 0x1a#define PCINIT_UNCHAN_B_MASK 0x1b#define PCINIT_PART68_LIMITER 0x1c#define PCINIT_XDI_FEATURES 0x1d#define PCINIT_QSIG_DIALECT 0x1e#define PCINIT_DISABLE_AUTOSPID_FLAG 0x1f#define PCINIT_FORCE_VOICE_MAIL_ALERT 0x20#define PCINIT_PIAFS_TURNAROUND_FRAMES 0x21#define PCINIT_L2_COUNT 0x22#define PCINIT_QSIG_FEATURES 0x23#define PCINIT_NO_SIGNALLING 0x24#define PCINIT_CARD_SN 0x25#define PCINIT_CARD_PORT 0x26#define PCINIT_ALERTTO 0x27#define PCINIT_MODEM_EYE_SETUP 0x28#define PCINIT_FAX_V34_OPTIONS 0x29/*------------------------------------------------------------------*/#define PCINIT_MODEM_GUARD_TONE_NONE 0x00#define PCINIT_MODEM_GUARD_TONE_550HZ 0x01#define PCINIT_MODEM_GUARD_TONE_1800HZ 0x02#define PCINIT_MODEM_GUARD_TONE_CHOICES 0x03#define PCINIT_MODEMPROT_DISABLE_V42_V42BIS 0x0001#define PCINIT_MODEMPROT_DISABLE_MNP_MNP5 0x0002#define PCINIT_MODEMPROT_REQUIRE_PROTOCOL 0x0004#define PCINIT_MODEMPROT_DISABLE_V42_DETECT 0x0008#define PCINIT_MODEMPROT_DISABLE_COMPRESSION 0x0010#define PCINIT_MODEMPROT_REQUIRE_PROTOCOL_V34UP 0x0020#define PCINIT_MODEMPROT_NO_PROTOCOL_IF_1200 0x0100#define PCINIT_MODEMPROT_BUFFER_IN_V42_DETECT 0x0200#define PCINIT_MODEMPROT_DISABLE_V42_SREJ 0x0400#define PCINIT_MODEMPROT_DISABLE_MNP3 0x0800#define PCINIT_MODEMPROT_DISABLE_MNP4 0x1000#define PCINIT_MODEMPROT_DISABLE_MNP10 0x2000#define PCINIT_MODEMPROT_NO_PROTOCOL_IF_V22BIS 0x4000#define PCINIT_MODEMPROT_NO_PROTOCOL_IF_V32BIS 0x8000#define PCINIT_MODEMCONFIG_LEASED_LINE_MODE 0x00000001L#define PCINIT_MODEMCONFIG_4_WIRE_OPERATION 0x00000002L#define PCINIT_MODEMCONFIG_DISABLE_BUSY_DETECT 0x00000004L#define PCINIT_MODEMCONFIG_DISABLE_CALLING_TONE 0x00000008L#define PCINIT_MODEMCONFIG_DISABLE_ANSWER_TONE 0x00000010L#define PCINIT_MODEMCONFIG_ENABLE_DIAL_TONE_DET 0x00000020L#define PCINIT_MODEMCONFIG_USE_POTS_INTERFACE 0x00000040L#define PCINIT_MODEMCONFIG_FORCE_RAY_TAYLOR_FAX 0x00000080L#define PCINIT_MODEMCONFIG_DISABLE_RETRAIN 0x00000100L#define PCINIT_MODEMCONFIG_DISABLE_STEPDOWN 0x00000200L#define PCINIT_MODEMCONFIG_DISABLE_SPLIT_SPEED 0x00000400L#define PCINIT_MODEMCONFIG_DISABLE_TRELLIS 0x00000800L#define PCINIT_MODEMCONFIG_ALLOW_RDL_TEST_LOOP 0x00001000L#define PCINIT_MODEMCONFIG_DISABLE_STEPUP 0x00002000L#define PCINIT_MODEMCONFIG_DISABLE_FLUSH_TIMER 0x00004000L#define PCINIT_MODEMCONFIG_REVERSE_DIRECTION 0x00008000L#define PCINIT_MODEMCONFIG_DISABLE_TX_REDUCTION 0x00010000L#define PCINIT_MODEMCONFIG_DISABLE_PRECODING 0x00020000L#define PCINIT_MODEMCONFIG_DISABLE_PREEMPHASIS 0x00040000L#define PCINIT_MODEMCONFIG_DISABLE_SHAPING 0x00080000L#define PCINIT_MODEMCONFIG_DISABLE_NONLINEAR_EN 0x00100000L#define PCINIT_MODEMCONFIG_DISABLE_MANUALREDUCT 0x00200000L#define PCINIT_MODEMCONFIG_DISABLE_16_POINT_TRN 0x00400000L#define PCINIT_MODEMCONFIG_DISABLE_2400_SYMBOLS 0x01000000L#define PCINIT_MODEMCONFIG_DISABLE_2743_SYMBOLS 0x02000000L#define PCINIT_MODEMCONFIG_DISABLE_2800_SYMBOLS 0x04000000L#define PCINIT_MODEMCONFIG_DISABLE_3000_SYMBOLS 0x08000000L#define PCINIT_MODEMCONFIG_DISABLE_3200_SYMBOLS 0x10000000L#define PCINIT_MODEMCONFIG_DISABLE_3429_SYMBOLS 0x20000000L#define PCINIT_MODEM_NEGOTIATE_HIGHEST 0x00#define PCINIT_MODEM_NEGOTIATE_DISABLED 0x01#define PCINIT_MODEM_NEGOTIATE_IN_CLASS 0x02#define PCINIT_MODEM_NEGOTIATE_V100 0x03#define PCINIT_MODEM_NEGOTIATE_V8 0x04#define PCINIT_MODEM_NEGOTIATE_V8BIS 0x05#define PCINIT_MODEM_NEGOTIATE_CHOICES 0x06#define PCINIT_MODEMMODULATION_DISABLE_V21 0x00000001L#define PCINIT_MODEMMODULATION_DISABLE_V23 0x00000002L#define PCINIT_MODEMMODULATION_DISABLE_V22 0x00000004L#define PCINIT_MODEMMODULATION_DISABLE_V22BIS 0x00000008L#define PCINIT_MODEMMODULATION_DISABLE_V32 0x00000010L#define PCINIT_MODEMMODULATION_DISABLE_V32BIS 0x00000020L#define PCINIT_MODEMMODULATION_DISABLE_V34 0x00000040L#define PCINIT_MODEMMODULATION_DISABLE_V90 0x00000080L#define PCINIT_MODEMMODULATION_DISABLE_BELL103 0x00000100L#define PCINIT_MODEMMODULATION_DISABLE_BELL212A 0x00000200L#define PCINIT_MODEMMODULATION_DISABLE_VFC 0x00000400L#define PCINIT_MODEMMODULATION_DISABLE_K56FLEX 0x00000800L#define PCINIT_MODEMMODULATION_DISABLE_X2 0x00001000L#define PCINIT_MODEMMODULATION_ENABLE_V29FDX 0x00010000L#define PCINIT_MODEMMODULATION_ENABLE_V33 0x00020000L#define PCINIT_MODEMMODULATION_ENABLE_V90A 0x00040000L#define PCINIT_MODEM_TRANSMIT_LEVEL_CHOICES 0x10#define PCINIT_MODEM_SPEAKER_OFF 0x00#define PCINIT_MODEM_SPEAKER_DURING_TRAIN 0x01#define PCINIT_MODEM_SPEAKER_TIL_CONNECT 0x02#define PCINIT_MODEM_SPEAKER_ALWAYS_ON 0x03#define PCINIT_MODEM_SPEAKER_CHOICES 0x04#define PCINIT_MODEM_SPEAKER_VOLUME_MIN 0x00#define PCINIT_MODEM_SPEAKER_VOLUME_LOW 0x01#define PCINIT_MODEM_SPEAKER_VOLUME_HIGH 0x02#define PCINIT_MODEM_SPEAKER_VOLUME_MAX 0x03#define PCINIT_MODEM_SPEAKER_VOLUME_CHOICES 0x04/*------------------------------------------------------------------*/#define PCINIT_FAXCONFIG_DISABLE_FINE 0x0001#define PCINIT_FAXCONFIG_DISABLE_ECM 0x0002#define PCINIT_FAXCONFIG_ECM_64_BYTES 0x0004#define PCINIT_FAXCONFIG_DISABLE_2D_CODING 0x0008#define PCINIT_FAXCONFIG_DISABLE_T6_CODING 0x0010#define PCINIT_FAXCONFIG_DISABLE_UNCOMPR 0x0020#define PCINIT_FAXCONFIG_REFUSE_POLLING 0x0040#define PCINIT_FAXCONFIG_HIDE_TOTAL_PAGES 0x0080#define PCINIT_FAXCONFIG_HIDE_ALL_HEADLINE 0x0100#define PCINIT_FAXCONFIG_HIDE_PAGE_INFO 0x0180#define PCINIT_FAXCONFIG_HEADLINE_OPTIONS_MASK 0x0180#define PCINIT_FAXCONFIG_DISABLE_FEATURE_FALLBACK 0x0200#define PCINIT_FAXCONFIG_V34FAX_CONTROL_RATE_1200 0x0800#define PCINIT_FAXCONFIG_DISABLE_V34FAX 0x1000#define PCINIT_FAXCONFIG_DISABLE_R8_0770_OR_200 0x01#define PCINIT_FAXCONFIG_DISABLE_R8_1540 0x02#define PCINIT_FAXCONFIG_DISABLE_R16_1540_OR_400 0x04#define PCINIT_FAXCONFIG_DISABLE_R4_0385_OR_100 0x08#define PCINIT_FAXCONFIG_DISABLE_300_300 0x10#define PCINIT_FAXCONFIG_DISABLE_INCH_BASED 0x40#define PCINIT_FAXCONFIG_DISABLE_METRIC_BASED 0x80#define PCINIT_FAXCONFIG_REC_WIDTH_ISO_A3 0#define PCINIT_FAXCONFIG_REC_WIDTH_ISO_B4 1#define PCINIT_FAXCONFIG_REC_WIDTH_ISO_A4 2#define PCINIT_FAXCONFIG_REC_WIDTH_COUNT 3#define PCINIT_FAXCONFIG_REC_LENGTH_UNLIMITED 0#define PCINIT_FAXCONFIG_REC_LENGTH_ISO_B4 1#define PCINIT_FAXCONFIG_REC_LENGTH_ISO_A4 2#define PCINIT_FAXCONFIG_REC_LENGTH_COUNT 3#define PCINIT_FAXCONFIG_SCANLINE_TIME_00_00_00 0#define PCINIT_FAXCONFIG_SCANLINE_TIME_05_05_05 1#define PCINIT_FAXCONFIG_SCANLINE_TIME_10_05_05 2#define PCINIT_FAXCONFIG_SCANLINE_TIME_10_10_10 3#define PCINIT_FAXCONFIG_SCANLINE_TIME_20_10_10 4#define PCINIT_FAXCONFIG_SCANLINE_TIME_20_20_20 5#define PCINIT_FAXCONFIG_SCANLINE_TIME_40_20_20 6#define PCINIT_FAXCONFIG_SCANLINE_TIME_40_40_40 7#define PCINIT_FAXCONFIG_SCANLINE_TIME_RES_8 8#define PCINIT_FAXCONFIG_SCANLINE_TIME_RES_9 9#define PCINIT_FAXCONFIG_SCANLINE_TIME_RES_10 10#define PCINIT_FAXCONFIG_SCANLINE_TIME_10_10_05 11#define PCINIT_FAXCONFIG_SCANLINE_TIME_20_10_05 12#define PCINIT_FAXCONFIG_SCANLINE_TIME_20_20_10 13#define PCINIT_FAXCONFIG_SCANLINE_TIME_40_20_10 14#define PCINIT_FAXCONFIG_SCANLINE_TIME_40_40_20 15#define PCINIT_FAXCONFIG_SCANLINE_TIME_COUNT 16#define PCINIT_FAXCONFIG_DISABLE_TX_REDUCTION 0x00010000L#define PCINIT_FAXCONFIG_DISABLE_PRECODING 0x00020000L#define PCINIT_FAXCONFIG_DISABLE_PREEMPHASIS 0x00040000L#define PCINIT_FAXCONFIG_DISABLE_SHAPING 0x00080000L#define PCINIT_FAXCONFIG_DISABLE_NONLINEAR_EN 0x00100000L#define PCINIT_FAXCONFIG_DISABLE_MANUALREDUCT 0x00200000L#define PCINIT_FAXCONFIG_DISABLE_16_POINT_TRN 0x00400000L#define PCINIT_FAXCONFIG_DISABLE_2400_SYMBOLS 0x01000000L#define PCINIT_FAXCONFIG_DISABLE_2743_SYMBOLS 0x02000000L#define PCINIT_FAXCONFIG_DISABLE_2800_SYMBOLS 0x04000000L#define PCINIT_FAXCONFIG_DISABLE_3000_SYMBOLS 0x08000000L#define PCINIT_FAXCONFIG_DISABLE_3200_SYMBOLS 0x10000000L#define PCINIT_FAXCONFIG_DISABLE_3429_SYMBOLS 0x20000000L/*--------------------------------------------------------------------------*/#define PCINIT_XDI_CMA_FOR_ALL_NL_PRIMITIVES 0x01/*--------------------------------------------------------------------------*/#define PCINIT_FPGA_PLX_ACCESS_SUPPORTED 0x01/*--------------------------------------------------------------------------*/#endif/*--------------------------------------------------------------------------*/⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -