pc.h

linux-2.6.15.6

/*
 *
  Copyright (c) Eicon Networks, 2002.
 *
  This source file is supplied for the use with
  Eicon Networks range of DIVA Server Adapters.
 *
  Eicon File Revision :    2.1
 *
  This program is free software; you can redistribute it and/or modify
  it under the terms of the GNU General Public License as published by
  the Free Software Foundation; either version 2, or (at your option)
  any later version.
 *
  This program is distributed in the hope that it will be useful,
  but WITHOUT ANY WARRANTY OF ANY KIND WHATSOEVER INCLUDING ANY
  implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
  See the GNU General Public License for more details.
 *
  You should have received a copy of the GNU General Public License
  along with this program; if not, write to the Free Software
  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 *
 */
#ifndef PC_H_INCLUDED  /* { */
#define PC_H_INCLUDED
/*------------------------------------------------------------------*/
/* buffer definition                                                */
/*------------------------------------------------------------------*/
typedef struct {
  word length;          /* length of data/parameter field           */
  byte P[270];          /* data/parameter field                     */
} PBUFFER;
/*------------------------------------------------------------------*/
/* dual port ram structure                                          */
/*------------------------------------------------------------------*/
struct dual
{
  byte Req;             /* request register                         */
  byte ReqId;           /* request task/entity identification       */
  byte Rc;              /* return code register                     */
  byte RcId;            /* return code task/entity identification   */
  byte Ind;             /* Indication register                      */
  byte IndId;           /* Indication task/entity identification    */
  byte IMask;           /* Interrupt Mask Flag                      */
  byte RNR;             /* Receiver Not Ready (set by PC)           */
  byte XLock;           /* XBuffer locked Flag                      */
  byte Int;             /* ISDN-S interrupt                         */
  byte ReqCh;           /* Channel field for layer-3 Requests       */
  byte RcCh;            /* Channel field for layer-3 Returncodes    */
  byte IndCh;           /* Channel field for layer-3 Indications    */
  byte MInd;            /* more data indication field               */
  word MLength;         /* more data total packet length            */
  byte ReadyInt;        /* request field for ready interrupt        */
  byte SWReg;           /* Software register for special purposes   */
  byte Reserved[11];    /* reserved space                           */
  byte InterfaceType;   /* interface type 1=16K interface           */
  word Signature;       /* ISDN-S adapter Signature (GD)            */
  PBUFFER XBuffer;      /* Transmit Buffer                          */
  PBUFFER RBuffer;      /* Receive Buffer                           */
};
/*------------------------------------------------------------------*/
/* SWReg Values (0 means no command)                                */
/*------------------------------------------------------------------*/
#define SWREG_DIE_WITH_LEDON  0x01
#define SWREG_HALT_CPU        0x02 /* Push CPU into a while(1) loop */
/*------------------------------------------------------------------*/
/* Id Fields Coding                                                 */
/*------------------------------------------------------------------*/
#define ID_MASK 0xe0    /* Mask for the ID field                    */
#define GL_ERR_ID 0x1f  /* ID for error reporting on global requests*/
#define DSIG_ID  0x00   /* ID for D-channel signaling               */
#define NL_ID    0x20   /* ID for network-layer access (B or D)     */
#define BLLC_ID  0x60   /* ID for B-channel link level access       */
#define TASK_ID  0x80   /* ID for dynamic user tasks                */
#define TIMER_ID 0xa0   /* ID for timer task                        */
#define TEL_ID   0xc0   /* ID for telephone support                 */
#define MAN_ID   0xe0   /* ID for management                        */
/*------------------------------------------------------------------*/
/* ASSIGN and REMOVE requests are the same for all entities         */
/*------------------------------------------------------------------*/
#define ASSIGN  0x01
#define UREMOVE 0xfe /* without return code */
#define REMOVE  0xff
/*------------------------------------------------------------------*/
/* Timer Interrupt Task Interface                                   */
/*------------------------------------------------------------------*/
#define ASSIGN_TIM 0x01
#define REMOVE_TIM 0xff
/*------------------------------------------------------------------*/
/* dynamic user task interface                                      */
/*------------------------------------------------------------------*/
#define ASSIGN_TSK 0x01
#define REMOVE_TSK 0xff
#define LOAD 0xf0
#define RELOCATE 0xf1
#define START 0xf2
#define LOAD2 0xf3
#define RELOCATE2 0xf4
/*------------------------------------------------------------------*/
/* dynamic user task messages                                       */
/*------------------------------------------------------------------*/
#define TSK_B2          0x0000
#define TSK_WAKEUP      0x2000
#define TSK_TIMER       0x4000
#define TSK_TSK         0x6000
#define TSK_PC          0xe000
/*------------------------------------------------------------------*/
/* LL management primitives                                         */
/*------------------------------------------------------------------*/
#define ASSIGN_LL 1     /* assign logical link                      */
#define REMOVE_LL 0xff  /* remove logical link                      */
/*------------------------------------------------------------------*/
/* LL service primitives                                            */
/*------------------------------------------------------------------*/
#define LL_UDATA 1      /* link unit data request/indication        */
#define LL_ESTABLISH 2  /* link establish request/indication        */
#define LL_RELEASE 3    /* link release request/indication          */
#define LL_DATA 4       /* data request/indication                  */
#define LL_LOCAL 5      /* switch to local operation (COM only)     */
#define LL_DATA_PEND 5  /* data pending indication (SDLC SHM only)  */
#define LL_REMOTE 6     /* switch to remote operation (COM only)    */
#define LL_TEST 8       /* link test request                        */
#define LL_MDATA 9      /* more data request/indication             */
#define LL_BUDATA 10    /* broadcast unit data request/indication   */
#define LL_XID 12       /* XID command request/indication           */
#define LL_XID_R 13     /* XID response request/indication          */
/*------------------------------------------------------------------*/
/* NL service primitives                                            */
/*------------------------------------------------------------------*/
#define N_MDATA         1       /* more data to come REQ/IND        */
#define N_CONNECT       2       /* OSI N-CONNECT REQ/IND            */
#define N_CONNECT_ACK   3       /* OSI N-CONNECT CON/RES            */
#define N_DISC          4       /* OSI N-DISC REQ/IND               */
#define N_DISC_ACK      5       /* OSI N-DISC CON/RES               */
#define N_RESET         6       /* OSI N-RESET REQ/IND              */
#define N_RESET_ACK     7       /* OSI N-RESET CON/RES              */
#define N_DATA          8       /* OSI N-DATA REQ/IND               */
#define N_EDATA         9       /* OSI N-EXPEDITED DATA REQ/IND     */
#define N_UDATA         10      /* OSI D-UNIT-DATA REQ/IND          */
#define N_BDATA         11      /* BROADCAST-DATA REQ/IND           */
#define N_DATA_ACK      12      /* data ack ind for D-bit procedure */
#define N_EDATA_ACK     13      /* data ack ind for INTERRUPT       */
#define N_XON           15      /* clear RNR state */
#define N_COMBI_IND     N_XON   /* combined indication              */
#define N_Q_BIT         0x10    /* Q-bit for req/ind                */
#define N_M_BIT         0x20    /* M-bit for req/ind                */
#define N_D_BIT         0x40    /* D-bit for req/ind                */
/*------------------------------------------------------------------*/
/* Signaling management primitives                                  */
/*------------------------------------------------------------------*/
#define ASSIGN_SIG  1    /* assign signaling task                    */
#define UREMOVE_SIG 0xfe /* remove signaling task without return code*/
#define REMOVE_SIG  0xff /* remove signaling task                    */
/*------------------------------------------------------------------*/
/* Signaling service primitives                                     */
/*------------------------------------------------------------------*/
#define CALL_REQ 1      /* call request                             */
#define CALL_CON 1      /* call confirmation                        */
#define CALL_IND 2      /* incoming call connected                  */
#define LISTEN_REQ 2    /* listen request                           */
#define HANGUP 3        /* hangup request/indication                */
#define SUSPEND 4       /* call suspend request/confirm             */
#define RESUME 5        /* call resume request/confirm              */
#define SUSPEND_REJ 6   /* suspend rejected indication              */
#define USER_DATA 8     /* user data for user to user signaling     */
#define CONGESTION 9    /* network congestion indication            */
#define INDICATE_REQ 10 /* request to indicate an incoming call     */
#define INDICATE_IND 10 /* indicates that there is an incoming call */
#define CALL_RES 11     /* accept an incoming call                  */
#define CALL_ALERT 12   /* send ALERT for incoming call             */
#define INFO_REQ 13     /* INFO request                             */
#define INFO_IND 13     /* INFO indication                          */
#define REJECT 14       /* reject an incoming call                  */
#define RESOURCES 15    /* reserve B-Channel hardware resources     */
#define HW_CTRL 16      /* B-Channel hardware IOCTL req/ind         */
#define TEL_CTRL 16     /* Telephone control request/indication     */
#define STATUS_REQ 17   /* Request D-State (returned in INFO_IND)   */
#define FAC_REG_REQ 18  /* 1TR6 connection independent fac reg      */
#define FAC_REG_ACK 19  /* 1TR6 fac registration acknowledge        */
#define FAC_REG_REJ 20  /* 1TR6 fac registration reject             */
#define CALL_COMPLETE 21/* send a CALL_PROC for incoming call       */
#define SW_CTRL 22      /* extended software features               */
#define REGISTER_REQ 23 /* Q.931 connection independent reg req     */
#define REGISTER_IND 24 /* Q.931 connection independent reg ind     */
#define FACILITY_REQ 25 /* Q.931 connection independent fac req     */
#define FACILITY_IND 26 /* Q.931 connection independent fac ind     */
#define NCR_INFO_REQ 27 /* INFO_REQ with NULL CR                    */
#define GCR_MIM_REQ 28  /* MANAGEMENT_INFO_REQ with global CR       */
#define SIG_CTRL    29  /* Control for Signalling Hardware          */
#define DSP_CTRL    30  /* Control for DSPs                         */
#define LAW_REQ      31 /* Law config request for (returns info_i)  */
#define SPID_CTRL    32 /* Request/indication SPID related          */
#define NCR_FACILITY 33 /* Request/indication with NULL/DUMMY CR    */
#define CALL_HOLD    34 /* Request/indication to hold a CALL        */
#define CALL_RETRIEVE 35 /* Request/indication to retrieve a CALL   */
#define CALL_HOLD_ACK 36 /* OK of                hold a CALL        */
#define CALL_RETRIEVE_ACK 37 /* OK of             retrieve a CALL   */
#define CALL_HOLD_REJ 38 /* Reject of            hold a CALL        */
#define CALL_RETRIEVE_REJ 39 /* Reject of         retrieve a call   */
#define GCR_RESTART   40 /* Send/Receive Restart message            */
#define S_SERVICE     41 /* Send/Receive Supplementary Service      */
#define S_SERVICE_REJ 42 /* Reject Supplementary Service indication */
#define S_SUPPORTED   43 /* Req/Ind to get Supported Services       */
#define STATUS_ENQ    44 /* Req to send the D-ch request if !state0 */
#define CALL_GUARD    45 /* Req/Ind to use the FLAGS_CALL_OUTCHECK  */
#define CALL_GUARD_HP 46 /* Call Guard function to reject a call    */
#define CALL_GUARD_IF 47 /* Call Guard function, inform the appl    */
#define SSEXT_REQ     48 /* Supplem.Serv./QSIG specific request     */
#define SSEXT_IND     49 /* Supplem.Serv./QSIG specific indication  */
/* reserved commands for the US protocols */
#define INT_3PTY_NIND 50 /* US       specific indication            */
#define INT_CF_NIND   51 /* US       specific indication            */
#define INT_3PTY_DROP 52 /* US       specific indication            */
#define INT_MOVE_CONF 53 /* US       specific indication            */
#define INT_MOVE_RC   54 /* US       specific indication            */
#define INT_MOVE_FLIPPED_CONF 55 /* US specific indication          */
#define INT_X5NI_OK   56 /* internal transfer OK indication         */
#define INT_XDMS_START 57 /* internal transfer OK indication        */
#define INT_XDMS_STOP 58 /* internal transfer finish indication     */
#define INT_XDMS_STOP2 59 /* internal transfer send FA              */
#define INT_CUSTCONF_REJ 60 /* internal conference reject           */
#define INT_CUSTXFER 61 /* internal transfer request                */
#define INT_CUSTX_NIND 62 /* internal transfer ack                  */
#define INT_CUSTXREJ_NIND 63 /* internal transfer rej               */
#define INT_X5NI_CF_XFER  64 /* internal transfer OK indication     */
#define VSWITCH_REQ 65        /* communication between protocol and */
#define VSWITCH_IND 66        /* capifunctions for D-CH-switching   */
#define MWI_POLL 67     /* Message Waiting Status Request fkt */
#define CALL_PEND_NOTIFY 68 /* notify capi to set new listen        */
#define DO_NOTHING 69       /* dont do somethin if you get this     */
#define INT_CT_REJ 70       /* ECT rejected internal command        */
#define CALL_HOLD_COMPLETE 71 /* In NT Mode indicate hold complete  */
#define CALL_RETRIEVE_COMPLETE 72 /* In NT Mode indicate retrieve complete  */
/*------------------------------------------------------------------*/
/* management service primitives                                    */
/*------------------------------------------------------------------*/
#define MAN_READ        2
#define MAN_WRITE       3
#define MAN_EXECUTE     4
#define MAN_EVENT_ON    5
#define MAN_EVENT_OFF   6
#define MAN_LOCK        7
#define MAN_UNLOCK      8
#define MAN_INFO_IND    2
#define MAN_EVENT_IND   3