📄 hfc_usb.c
字号:
/* * hfc_usb.c * * $Id: hfc_usb.c,v 4.36 2005/04/08 09:55:13 martinb1 Exp $ * * modular HiSax ISDN driver for Colognechip HFC-S USB chip * * Authors : Peter Sprenger (sprenger@moving-bytes.de) * Martin Bachem (info@colognechip.com) * * based on the first hfc_usb driver of * Werner Cornelius (werner@isdn-development.de) * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2, or (at your option) * any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * * See Version Histroy at the bottom of this file **/#include <linux/types.h>#include <linux/stddef.h>#include <linux/timer.h>#include <linux/config.h>#include <linux/init.h>#include <linux/module.h>#include <linux/kernel_stat.h>#include <linux/usb.h>#include <linux/kernel.h>#include <linux/smp_lock.h>#include <linux/sched.h>#include "hisax.h"#include "hisax_if.h"#include "hfc_usb.h"static const char *hfcusb_revision = "$Revision: 4.36 $ $Date: 2005/04/08 09:55:13 $ ";/* Hisax debug support* use "modprobe debug=x" where x is bitfield of USB_DBG & ISDN_DBG*/#ifdef CONFIG_HISAX_DEBUG#include <linux/moduleparam.h>#define __debug_variable hfc_debug#include "hisax_debug.h"static u_int debug;module_param(debug, uint, 0);static int hfc_debug;#endif/* private vendor specific data */typedef struct { __u8 led_scheme; // led display scheme signed short led_bits[8]; // array of 8 possible LED bitmask settings char *vend_name; // device name} hfcsusb_vdata;/****************************************//* data defining the devices to be used *//****************************************/static struct usb_device_id hfcusb_idtab[] = { { USB_DEVICE(0x0959, 0x2bd0), .driver_info = (unsigned long) &((hfcsusb_vdata) {LED_OFF, {4, 0, 2, 1}, "ISDN USB TA (Cologne Chip HFC-S USB based)"}), }, { USB_DEVICE(0x0675, 0x1688), .driver_info = (unsigned long) &((hfcsusb_vdata) {LED_SCHEME1, {1, 2, 0, 0}, "DrayTek miniVigor 128 USB ISDN TA"}), }, { USB_DEVICE(0x07b0, 0x0007), .driver_info = (unsigned long) &((hfcsusb_vdata) {LED_SCHEME1, {0x80, -64, -32, -16}, "Billion tiny USB ISDN TA 128"}), }, { USB_DEVICE(0x0742, 0x2008), .driver_info = (unsigned long) &((hfcsusb_vdata) {LED_SCHEME1, {4, 0, 2, 1}, "Stollmann USB TA"}), }, { USB_DEVICE(0x0742, 0x2009), .driver_info = (unsigned long) &((hfcsusb_vdata) {LED_SCHEME1, {4, 0, 2, 1}, "Aceex USB ISDN TA"}), }, { USB_DEVICE(0x0742, 0x200A), .driver_info = (unsigned long) &((hfcsusb_vdata) {LED_SCHEME1, {4, 0, 2, 1}, "OEM USB ISDN TA"}), }, { USB_DEVICE(0x08e3, 0x0301), .driver_info = (unsigned long) &((hfcsusb_vdata) {LED_SCHEME1, {2, 0, 1, 4}, "Olitec USB RNIS"}), }, { USB_DEVICE(0x07fa, 0x0846), .driver_info = (unsigned long) &((hfcsusb_vdata) {LED_SCHEME1, {0x80, -64, -32, -16}, "Bewan Modem RNIS USB"}), }, { USB_DEVICE(0x07fa, 0x0847), .driver_info = (unsigned long) &((hfcsusb_vdata) {LED_SCHEME1, {0x80, -64, -32, -16}, "Djinn Numeris USB"}), }, { USB_DEVICE(0x07b0, 0x0006), .driver_info = (unsigned long) &((hfcsusb_vdata) {LED_SCHEME1, {0x80, -64, -32, -16}, "Twister ISDN TA"}), }, { }};/***************************************************************//* structure defining input+output fifos (interrupt/bulk mode) *//***************************************************************/struct usb_fifo; /* forward definition */typedef struct iso_urb_struct { struct urb *purb; __u8 buffer[ISO_BUFFER_SIZE]; /* buffer incoming/outgoing data */ struct usb_fifo *owner_fifo; /* pointer to owner fifo */} iso_urb_struct;struct hfcusb_data; /* forward definition */typedef struct usb_fifo { int fifonum; /* fifo index attached to this structure */ int active; /* fifo is currently active */ struct hfcusb_data *hfc; /* pointer to main structure */ int pipe; /* address of endpoint */ __u8 usb_packet_maxlen; /* maximum length for usb transfer */ unsigned int max_size; /* maximum size of receive/send packet */ __u8 intervall; /* interrupt interval */ struct sk_buff *skbuff; /* actual used buffer */ struct urb *urb; /* transfer structure for usb routines */ __u8 buffer[128]; /* buffer incoming/outgoing data */ int bit_line; /* how much bits are in the fifo? */ volatile __u8 usb_transfer_mode; /* switched between ISO and INT */ iso_urb_struct iso[2]; /* need two urbs to have one always for pending */ struct hisax_if *hif; /* hisax interface */ int delete_flg; /* only delete skbuff once */ int last_urblen; /* remember length of last packet */} usb_fifo;/*********************************************//* structure holding all data for one device *//*********************************************/typedef struct hfcusb_data { /* HiSax Interface for loadable Layer1 drivers */ struct hisax_d_if d_if; /* see hisax_if.h */ struct hisax_b_if b_if[2]; /* see hisax_if.h */ int protocol; struct usb_device *dev; /* our device */ int if_used; /* used interface number */ int alt_used; /* used alternate config */ int ctrl_paksize; /* control pipe packet size */ int ctrl_in_pipe, ctrl_out_pipe; /* handles for control pipe */ int cfg_used; /* configuration index used */ int vend_idx; /* vendor found */ int b_mode[2]; /* B-channel mode */ int l1_activated; /* layer 1 activated */ int disc_flag; /* TRUE if device was disonnected to avoid some USB actions */ int packet_size, iso_packet_size; /* control pipe background handling */ ctrl_buft ctrl_buff[HFC_CTRL_BUFSIZE]; /* buffer holding queued data */ volatile int ctrl_in_idx, ctrl_out_idx, ctrl_cnt; /* input/output pointer + count */ struct urb *ctrl_urb; /* transfer structure for control channel */ struct usb_ctrlrequest ctrl_write; /* buffer for control write request */ struct usb_ctrlrequest ctrl_read; /* same for read request */ __u8 old_led_state, led_state, led_new_data, led_b_active; volatile __u8 threshold_mask; /* threshold actually reported */ volatile __u8 bch_enables; /* or mask for sctrl_r and sctrl register values */ usb_fifo fifos[HFCUSB_NUM_FIFOS]; /* structure holding all fifo data */ volatile __u8 l1_state; /* actual l1 state */ struct timer_list t3_timer; /* timer 3 for activation/deactivation */ struct timer_list t4_timer; /* timer 4 for activation/deactivation */} hfcusb_data;static void collect_rx_frame(usb_fifo * fifo, __u8 * data, int len, int finish);static inline const char *symbolic(struct hfcusb_symbolic_list list[], const int num){ int i; for (i = 0; list[i].name != NULL; i++) if (list[i].num == num) return (list[i].name); return "<unkown ERROR>";}/******************************************************//* start next background transfer for control channel *//******************************************************/static voidctrl_start_transfer(hfcusb_data * hfc){ if (hfc->ctrl_cnt) { hfc->ctrl_urb->pipe = hfc->ctrl_out_pipe; hfc->ctrl_urb->setup_packet = (u_char *) & hfc->ctrl_write; hfc->ctrl_urb->transfer_buffer = NULL; hfc->ctrl_urb->transfer_buffer_length = 0; hfc->ctrl_write.wIndex = hfc->ctrl_buff[hfc->ctrl_out_idx].hfc_reg; hfc->ctrl_write.wValue = hfc->ctrl_buff[hfc->ctrl_out_idx].reg_val; usb_submit_urb(hfc->ctrl_urb, GFP_ATOMIC); /* start transfer */ }} /* ctrl_start_transfer *//************************************//* queue a control transfer request *//* return 0 on success. *//************************************/static intqueue_control_request(hfcusb_data * hfc, __u8 reg, __u8 val, int action){ ctrl_buft *buf; if (hfc->ctrl_cnt >= HFC_CTRL_BUFSIZE) return (1); /* no space left */ buf = &hfc->ctrl_buff[hfc->ctrl_in_idx]; /* pointer to new index */ buf->hfc_reg = reg; buf->reg_val = val; buf->action = action; if (++hfc->ctrl_in_idx >= HFC_CTRL_BUFSIZE) hfc->ctrl_in_idx = 0; /* pointer wrap */ if (++hfc->ctrl_cnt == 1) ctrl_start_transfer(hfc); return (0);} /* queue_control_request */static intcontrol_action_handler(hfcusb_data * hfc, int reg, int val, int action){ if (!action) return (1); /* no action defined */ return (0);}/***************************************************************//* control completion routine handling background control cmds *//***************************************************************/static voidctrl_complete(struct urb *urb, struct pt_regs *regs){ hfcusb_data *hfc = (hfcusb_data *) urb->context; ctrl_buft *buf; urb->dev = hfc->dev; if (hfc->ctrl_cnt) { buf = &hfc->ctrl_buff[hfc->ctrl_out_idx]; control_action_handler(hfc, buf->hfc_reg, buf->reg_val, buf->action); hfc->ctrl_cnt--; /* decrement actual count */ if (++hfc->ctrl_out_idx >= HFC_CTRL_BUFSIZE) hfc->ctrl_out_idx = 0; /* pointer wrap */ ctrl_start_transfer(hfc); /* start next transfer */ }} /* ctrl_complete *//***************************************************//* write led data to auxport & invert if necessary *//***************************************************/static voidwrite_led(hfcusb_data * hfc, __u8 led_state){ if (led_state != hfc->old_led_state) { hfc->old_led_state = led_state; queue_control_request(hfc, HFCUSB_P_DATA, led_state, 1); }}/**************************//* handle LED bits *//**************************/static voidset_led_bit(hfcusb_data * hfc, signed short led_bits, int unset){ if (unset) { if (led_bits < 0) hfc->led_state |= abs(led_bits); else hfc->led_state &= ~led_bits; } else { if (led_bits < 0) hfc->led_state &= ~abs(led_bits); else hfc->led_state |= led_bits; }}/**************************//* handle LED requests *//**************************/static voidhandle_led(hfcusb_data * hfc, int event){ hfcsusb_vdata *driver_info = (hfcsusb_vdata *) hfcusb_idtab[hfc->vend_idx].driver_info; /* if no scheme -> no LED action */ if (driver_info->led_scheme == LED_OFF) return; switch (event) { case LED_POWER_ON: set_led_bit(hfc, driver_info->led_bits[0], 0); set_led_bit(hfc, driver_info->led_bits[1], 1); set_led_bit(hfc, driver_info->led_bits[2], 1); set_led_bit(hfc, driver_info->led_bits[3], 1); break; case LED_POWER_OFF: /* no Power off handling */ break; case LED_S0_ON: set_led_bit(hfc, driver_info->led_bits[1], 0); break; case LED_S0_OFF: set_led_bit(hfc, driver_info->led_bits[1], 1); break; case LED_B1_ON: set_led_bit(hfc, driver_info->led_bits[2], 0); break; case LED_B1_OFF: set_led_bit(hfc, driver_info->led_bits[2], 1); break; case LED_B2_ON: set_led_bit(hfc, driver_info->led_bits[3], 0); break; case LED_B2_OFF: set_led_bit(hfc, driver_info->led_bits[3], 1); break; } write_led(hfc, hfc->led_state);}/********************************//* called when timer t3 expires *//********************************/static voidl1_timer_expire_t3(hfcusb_data * hfc){ hfc->d_if.ifc.l1l2(&hfc->d_if.ifc, PH_DEACTIVATE | INDICATION, NULL);#ifdef CONFIG_HISAX_DEBUG DBG(ISDN_DBG, "HFC-S USB: PH_DEACTIVATE | INDICATION sent (T3 expire)");#endif hfc->l1_activated = FALSE; handle_led(hfc, LED_S0_OFF); /* deactivate : */ queue_control_request(hfc, HFCUSB_STATES, 0x10, 1); queue_control_request(hfc, HFCUSB_STATES, 3, 1);}/********************************//* called when timer t4 expires *//********************************/static voidl1_timer_expire_t4(hfcusb_data * hfc){ hfc->d_if.ifc.l1l2(&hfc->d_if.ifc, PH_DEACTIVATE | INDICATION, NULL);#ifdef CONFIG_HISAX_DEBUG DBG(ISDN_DBG, "HFC-S USB: PH_DEACTIVATE | INDICATION sent (T4 expire)");#endif hfc->l1_activated = FALSE; handle_led(hfc, LED_S0_OFF);}/*****************************//* handle S0 state changes *//*****************************/static voidstate_handler(hfcusb_data * hfc, __u8 state){ __u8 old_state; old_state = hfc->l1_state; if (state == old_state || state < 1 || state > 8) return;#ifdef CONFIG_HISAX_DEBUG DBG(ISDN_DBG, "HFC-S USB: new S0 state:%d old_state:%d", state, old_state);#endif if (state < 4 || state == 7 || state == 8) { if (timer_pending(&hfc->t3_timer)) del_timer(&hfc->t3_timer);#ifdef CONFIG_HISAX_DEBUG DBG(ISDN_DBG, "HFC-S USB: T3 deactivated");#endif }
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -