⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 device_id.c

📁 linux-2.6.15.6
💻 C
字号:
/* * drivers/s390/cio/device_id.c * *    Copyright (C) 2002 IBM Deutschland Entwicklung GmbH, *			 IBM Corporation *    Author(s): Cornelia Huck(cohuck@de.ibm.com) *		 Martin Schwidefsky (schwidefsky@de.ibm.com) * * Sense ID functions. */#include <linux/module.h>#include <linux/config.h>#include <linux/init.h>#include <asm/ccwdev.h>#include <asm/delay.h>#include <asm/cio.h>#include <asm/lowcore.h>#include "cio.h"#include "cio_debug.h"#include "css.h"#include "device.h"#include "ioasm.h"/* * diag210 is used under VM to get information about a virtual device */#ifdef CONFIG_ARCH_S390Xintdiag210(struct diag210 * addr){	/*	 * diag 210 needs its data below the 2GB border, so we	 * use a static data area to be sure	 */	static struct diag210 diag210_tmp;	static DEFINE_SPINLOCK(diag210_lock);	unsigned long flags;	int ccode;	spin_lock_irqsave(&diag210_lock, flags);	diag210_tmp = *addr;	asm volatile (		"   lhi	  %0,-1\n"		"   sam31\n"		"   diag  %1,0,0x210\n"		"0: ipm	  %0\n"		"   srl	  %0,28\n"		"1: sam64\n"		".section __ex_table,\"a\"\n"		"    .align 8\n"		"    .quad 0b,1b\n"		".previous"		: "=&d" (ccode) : "a" (__pa(&diag210_tmp)) : "cc", "memory" );	*addr = diag210_tmp;	spin_unlock_irqrestore(&diag210_lock, flags);	return ccode;}#elseintdiag210(struct diag210 * addr){	int ccode;	asm volatile (		"   lhi	  %0,-1\n"		"   diag  %1,0,0x210\n"		"0: ipm	  %0\n"		"   srl	  %0,28\n"		"1:\n"		".section __ex_table,\"a\"\n"		"    .align 4\n"		"    .long 0b,1b\n"		".previous"		: "=&d" (ccode) : "a" (__pa(addr)) : "cc", "memory" );	return ccode;}#endif/* * Input : *   devno - device number *   ps	   - pointer to sense ID data area * Output : none */static voidVM_virtual_device_info (__u16 devno, struct senseid *ps){	static struct {		int vrdcvcla, vrdcvtyp, cu_type;	} vm_devices[] = {		{ 0x08, 0x01, 0x3480 },		{ 0x08, 0x02, 0x3430 },		{ 0x08, 0x10, 0x3420 },		{ 0x08, 0x42, 0x3424 },		{ 0x08, 0x44, 0x9348 },		{ 0x08, 0x81, 0x3490 },		{ 0x08, 0x82, 0x3422 },		{ 0x10, 0x41, 0x1403 },		{ 0x10, 0x42, 0x3211 },		{ 0x10, 0x43, 0x3203 },		{ 0x10, 0x45, 0x3800 },		{ 0x10, 0x47, 0x3262 },		{ 0x10, 0x48, 0x3820 },		{ 0x10, 0x49, 0x3800 },		{ 0x10, 0x4a, 0x4245 },		{ 0x10, 0x4b, 0x4248 },		{ 0x10, 0x4d, 0x3800 },		{ 0x10, 0x4e, 0x3820 },		{ 0x10, 0x4f, 0x3820 },		{ 0x10, 0x82, 0x2540 },		{ 0x10, 0x84, 0x3525 },		{ 0x20, 0x81, 0x2501 },		{ 0x20, 0x82, 0x2540 },		{ 0x20, 0x84, 0x3505 },		{ 0x40, 0x01, 0x3278 },		{ 0x40, 0x04, 0x3277 },		{ 0x40, 0x80, 0x2250 },		{ 0x40, 0xc0, 0x5080 },		{ 0x80, 0x00, 0x3215 },	};	struct diag210 diag_data;	int ccode, i;	CIO_TRACE_EVENT (4, "VMvdinf");	diag_data = (struct diag210) {		.vrdcdvno = devno,		.vrdclen = sizeof (diag_data),	};	ccode = diag210 (&diag_data);	ps->reserved = 0xff;	/* Special case for bloody osa devices. */	if (diag_data.vrdcvcla == 0x02 &&	    diag_data.vrdcvtyp == 0x20) {		ps->cu_type = 0x3088;		ps->cu_model = 0x60;		return;	}	for (i = 0; i < sizeof(vm_devices) / sizeof(vm_devices[0]); i++)		if (diag_data.vrdcvcla == vm_devices[i].vrdcvcla &&		    diag_data.vrdcvtyp == vm_devices[i].vrdcvtyp) {			ps->cu_type = vm_devices[i].cu_type;			return;		}	CIO_MSG_EVENT(0, "DIAG X'210' for device %04X returned (cc = %d):"		      "vdev class : %02X, vdev type : %04X \n ...  "		      "rdev class : %02X, rdev type : %04X, "		      "rdev model: %02X\n",		      devno, ccode,		      diag_data.vrdcvcla, diag_data.vrdcvtyp,		      diag_data.vrdcrccl, diag_data.vrdccrty,		      diag_data.vrdccrmd);}/* * Start Sense ID helper function. * Try to obtain the 'control unit'/'device type' information *  associated with the subchannel. */static int__ccw_device_sense_id_start(struct ccw_device *cdev){	struct subchannel *sch;	struct ccw1 *ccw;	int ret;	sch = to_subchannel(cdev->dev.parent);	/* Setup sense channel program. */	ccw = cdev->private->iccws;	if (sch->schib.pmcw.pim != 0x80) {		/* more than one path installed. */		ccw->cmd_code = CCW_CMD_SUSPEND_RECONN;		ccw->cda = 0;		ccw->count = 0;		ccw->flags = CCW_FLAG_SLI | CCW_FLAG_CC;		ccw++;	}	ccw->cmd_code = CCW_CMD_SENSE_ID;	ccw->cda = (__u32) __pa (&cdev->private->senseid);	ccw->count = sizeof (struct senseid);	ccw->flags = CCW_FLAG_SLI;	/* Reset device status. */	memset(&cdev->private->irb, 0, sizeof(struct irb));	/* Try on every path. */	ret = -ENODEV;	while (cdev->private->imask != 0) {		if ((sch->opm & cdev->private->imask) != 0 &&		    cdev->private->iretry > 0) {			cdev->private->iretry--;			ret = cio_start (sch, cdev->private->iccws,					 cdev->private->imask);			/* ret is 0, -EBUSY, -EACCES or -ENODEV */			if (ret != -EACCES)				return ret;		}		cdev->private->imask >>= 1;		cdev->private->iretry = 5;	}	return ret;}voidccw_device_sense_id_start(struct ccw_device *cdev){	int ret;	memset (&cdev->private->senseid, 0, sizeof (struct senseid));	cdev->private->senseid.cu_type = 0xFFFF;	cdev->private->imask = 0x80;	cdev->private->iretry = 5;	ret = __ccw_device_sense_id_start(cdev);	if (ret && ret != -EBUSY)		ccw_device_sense_id_done(cdev, ret);}/* * Called from interrupt context to check if a valid answer * to Sense ID was received. */static intccw_device_check_sense_id(struct ccw_device *cdev){	struct subchannel *sch;	struct irb *irb;	sch = to_subchannel(cdev->dev.parent);	irb = &cdev->private->irb;	/* Did we get a proper answer ? */	if (cdev->private->senseid.cu_type != 0xFFFF && 	    cdev->private->senseid.reserved == 0xFF) {		if (irb->scsw.count < sizeof (struct senseid) - 8)			cdev->private->flags.esid = 1;		return 0; /* Success */	}	/* Check the error cases. */	if (irb->scsw.fctl & (SCSW_FCTL_HALT_FUNC | SCSW_FCTL_CLEAR_FUNC))		return -ETIME;	if (irb->esw.esw0.erw.cons && (irb->ecw[0] & SNS0_CMD_REJECT)) {		/*		 * if the device doesn't support the SenseID		 *  command further retries wouldn't help ...		 * NB: We don't check here for intervention required like we		 *     did before, because tape devices with no tape inserted		 *     may present this status *in conjunction with* the		 *     sense id information. So, for intervention required,		 *     we use the "whack it until it talks" strategy...		 */		CIO_MSG_EVENT(2, "SenseID : device %04x on Subchannel %04x "			      "reports cmd reject\n",			      cdev->private->devno, sch->irq);		return -EOPNOTSUPP;	}	if (irb->esw.esw0.erw.cons) {		CIO_MSG_EVENT(2, "SenseID : UC on dev %04x, "			      "lpum %02X, cnt %02d, sns :"			      " %02X%02X%02X%02X %02X%02X%02X%02X ...\n",			      cdev->private->devno,			      irb->esw.esw0.sublog.lpum,			      irb->esw.esw0.erw.scnt,			      irb->ecw[0], irb->ecw[1],			      irb->ecw[2], irb->ecw[3],			      irb->ecw[4], irb->ecw[5],			      irb->ecw[6], irb->ecw[7]);		return -EAGAIN;	}	if (irb->scsw.cc == 3) {		if ((sch->orb.lpm &		     sch->schib.pmcw.pim & sch->schib.pmcw.pam) != 0)			CIO_MSG_EVENT(2, "SenseID : path %02X for device %04x on"				      " subchannel %04x is 'not operational'\n",				      sch->orb.lpm, cdev->private->devno,				      sch->irq);		return -EACCES;	}	/* Hmm, whatever happened, try again. */	CIO_MSG_EVENT(2, "SenseID : start_IO() for device %04x on "		      "subchannel %04x returns status %02X%02X\n",		      cdev->private->devno, sch->irq,		      irb->scsw.dstat, irb->scsw.cstat);	return -EAGAIN;}/* * Got interrupt for Sense ID. */voidccw_device_sense_id_irq(struct ccw_device *cdev, enum dev_event dev_event){	struct subchannel *sch;	struct irb *irb;	int ret;	sch = to_subchannel(cdev->dev.parent);	irb = (struct irb *) __LC_IRB;	/* Retry sense id, if needed. */	if (irb->scsw.stctl ==	    (SCSW_STCTL_STATUS_PEND | SCSW_STCTL_ALERT_STATUS)) {		if ((irb->scsw.cc == 1) || !irb->scsw.actl) {			ret = __ccw_device_sense_id_start(cdev);			if (ret && ret != -EBUSY)				ccw_device_sense_id_done(cdev, ret);		}		return;	}	if (ccw_device_accumulate_and_sense(cdev, irb) != 0)		return;	ret = ccw_device_check_sense_id(cdev);	memset(&cdev->private->irb, 0, sizeof(struct irb));	switch (ret) {	/* 0, -ETIME, -EOPNOTSUPP, -EAGAIN or -EACCES */	case 0:			/* Sense id succeeded. */	case -ETIME:		/* Sense id stopped by timeout. */		ccw_device_sense_id_done(cdev, ret);		break;	case -EACCES:		/* channel is not operational. */		sch->lpm &= ~cdev->private->imask;		cdev->private->imask >>= 1;		cdev->private->iretry = 5;		/* fall through. */	case -EAGAIN:		/* try again. */		ret = __ccw_device_sense_id_start(cdev);		if (ret == 0 || ret == -EBUSY)			break;		/* fall through. */	default:		/* Sense ID failed. Try asking VM. */		if (MACHINE_IS_VM) {			VM_virtual_device_info (cdev->private->devno,						&cdev->private->senseid);			if (cdev->private->senseid.cu_type != 0xFFFF) {				/* Got the device information from VM. */				ccw_device_sense_id_done(cdev, 0);				return;			}		}		/*		 * If we can't couldn't identify the device type we		 *  consider the device "not operational".		 */		ccw_device_sense_id_done(cdev, -ENODEV);		break;	}}EXPORT_SYMBOL(diag210);

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -