📄 mvme5100.h
字号:
/* * include/asm-ppc/platforms/mvme5100.h * * Definitions for Motorola MVME5100. * * Author: Matt Porter <mporter@mvista.com> * * 2001 (c) MontaVista, Software, Inc. This file is licensed under * the terms of the GNU General Public License version 2. This program * is licensed "as is" without any warranty of any kind, whether express * or implied. */#ifdef __KERNEL__#ifndef __ASM_MVME5100_H__#define __ASM_MVME5100_H__#define MVME5100_HAWK_SMC_BASE 0xfef80000#define MVME5100_PCI_CONFIG_ADDR 0xfe000cf8#define MVME5100_PCI_CONFIG_DATA 0xfe000cfc#define MVME5100_PCI_IO_BASE 0xfe000000#define MVME5100_PCI_MEM_BASE 0x80000000#define MVME5100_PCI_MEM_OFFSET 0x00000000#define MVME5100_PCI_DRAM_OFFSET 0x00000000#define MVME5100_ISA_MEM_BASE 0x00000000#define MVME5100_ISA_IO_BASE MVME5100_PCI_IO_BASE#define MVME5100_PCI_LOWER_MEM 0x80000000#define MVME5100_PCI_UPPER_MEM 0xf3f7ffff#define MVME5100_PCI_LOWER_IO 0x00000000#define MVME5100_PCI_UPPER_IO 0x0077ffff/* MVME5100 board register addresses. */#define MVME5100_BOARD_STATUS_REG 0xfef88080#define MVME5100_BOARD_MODFAIL_REG 0xfef88090#define MVME5100_BOARD_MODRST_REG 0xfef880a0#define MVME5100_BOARD_TBEN_REG 0xfef880c0#define MVME5100_BOARD_SW_READ_REG 0xfef880e0#define MVME5100_BOARD_GEO_ADDR_REG 0xfef880e8#define MVME5100_BOARD_EXT_FEATURE1_REG 0xfef880f0#define MVME5100_BOARD_EXT_FEATURE2_REG 0xfef88100/* Define the NVRAM/RTC address strobe & data registers */#define MVME5100_PHYS_NVRAM_AS0 0xfef880c8#define MVME5100_PHYS_NVRAM_AS1 0xfef880d0#define MVME5100_PHYS_NVRAM_DATA 0xfef880d8#define MVME5100_NVRAM_AS0 (MVME5100_PHYS_NVRAM_AS0 - MVME5100_ISA_IO_BASE)#define MVME5100_NVRAM_AS1 (MVME5100_PHYS_NVRAM_AS1 - MVME5100_ISA_IO_BASE)#define MVME5100_NVRAM_DATA (MVME5100_PHYS_NVRAM_DATA - MVME5100_ISA_IO_BASE)/* UART clock, addresses, and irq */#define MVME5100_BASE_BAUD 1843200#define MVME5100_SERIAL_1 0xfef88000#define MVME5100_SERIAL_2 0xfef88200#ifdef CONFIG_MVME5100_IPMC761_PRESENT#define MVME5100_SERIAL_IRQ 17#else#define MVME5100_SERIAL_IRQ 1#endif#define RS_TABLE_SIZE 4#define BASE_BAUD ( MVME5100_BASE_BAUD / 16 )#define STD_COM_FLAGS ASYNC_BOOT_AUTOCONF/* All UART IRQ's are wire-OR'd to one MPIC IRQ */#define STD_SERIAL_PORT_DFNS \ { 0, BASE_BAUD, MVME5100_SERIAL_1, \ MVME5100_SERIAL_IRQ, \ STD_COM_FLAGS, /* ttyS0 */ \ iomem_base: (unsigned char *)MVME5100_SERIAL_1, \ iomem_reg_shift: 4, \ io_type: SERIAL_IO_MEM }, \ { 0, BASE_BAUD, MVME5100_SERIAL_2, \ MVME5100_SERIAL_IRQ, \ STD_COM_FLAGS, /* ttyS1 */ \ iomem_base: (unsigned char *)MVME5100_SERIAL_2, \ iomem_reg_shift: 4, \ io_type: SERIAL_IO_MEM },#define SERIAL_PORT_DFNS \ STD_SERIAL_PORT_DFNS#endif /* __ASM_MVME5100_H__ */#endif /* __KERNEL__ */
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -