📄 mvme5100.c
字号:
/* * arch/ppc/platforms/mvme5100.c * * Board setup routines for the Motorola MVME5100. * * Author: Matt Porter <mporter@mvista.com> * * 2001-2004 (c) MontaVista, Software, Inc. This file is licensed under * the terms of the GNU General Public License version 2. This program * is licensed "as is" without any warranty of any kind, whether express * or implied. */#include <linux/config.h>#include <linux/stddef.h>#include <linux/kernel.h>#include <linux/init.h>#include <linux/errno.h>#include <linux/pci.h>#include <linux/initrd.h>#include <linux/console.h>#include <linux/delay.h>#include <linux/ide.h>#include <linux/seq_file.h>#include <linux/kdev_t.h>#include <linux/root_dev.h>#include <asm/system.h>#include <asm/pgtable.h>#include <asm/page.h>#include <asm/dma.h>#include <asm/io.h>#include <asm/machdep.h>#include <asm/open_pic.h>#include <asm/i8259.h>#include <asm/todc.h>#include <asm/pci-bridge.h>#include <asm/bootinfo.h>#include <asm/hawk.h>#include <platforms/pplus.h>#include <platforms/mvme5100.h>static u_char mvme5100_openpic_initsenses[16] __initdata = { (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* i8259 cascade */ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* TL16C550 UART 1,2 */ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Enet1 front panel or P2 */ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Hawk Watchdog 1,2 */ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* DS1621 thermal alarm */ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Universe II LINT0# */ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Universe II LINT1# */ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Universe II LINT2# */ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Universe II LINT3# */ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* PMC1 INTA#, PMC2 INTB# */ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* PMC1 INTB#, PMC2 INTC# */ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* PMC1 INTC#, PMC2 INTD# */ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* PMC1 INTD#, PMC2 INTA# */ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Enet 2 (front panel) */ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Abort Switch */ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* RTC Alarm */};static inline intmvme5100_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin){ int irq; static char pci_irq_table[][4] = /* * PCI IDSEL/INTPIN->INTLINE * A B C D */ { { 0, 0, 0, 0 }, /* IDSEL 11 - Winbond */ { 0, 0, 0, 0 }, /* IDSEL 12 - unused */ { 21, 22, 23, 24 }, /* IDSEL 13 - Universe II */ { 18, 0, 0, 0 }, /* IDSEL 14 - Enet 1 */ { 0, 0, 0, 0 }, /* IDSEL 15 - unused */ { 25, 26, 27, 28 }, /* IDSEL 16 - PMC Slot 1 */ { 28, 25, 26, 27 }, /* IDSEL 17 - PMC Slot 2 */ { 0, 0, 0, 0 }, /* IDSEL 18 - unused */ { 29, 0, 0, 0 }, /* IDSEL 19 - Enet 2 */ { 0, 0, 0, 0 }, /* IDSEL 20 - PMCSPAN */ }; const long min_idsel = 11, max_idsel = 20, irqs_per_slot = 4; irq = PCI_IRQ_TABLE_LOOKUP; /* If lookup is zero, always return 0 */ if (!irq) return 0; else#ifdef CONFIG_MVME5100_IPMC761_PRESENT /* If IPMC761 present, return table value */ return irq;#else /* If IPMC761 not present, we don't have an i8259 so adjust */ return (irq - NUM_8259_INTERRUPTS);#endif}static voidmvme5100_pcibios_fixup_resources(struct pci_dev *dev){ int i; if ((dev->vendor == PCI_VENDOR_ID_MOTOROLA) && (dev->device == PCI_DEVICE_ID_MOTOROLA_HAWK)) for (i=0; i<DEVICE_COUNT_RESOURCE; i++) { dev->resource[i].start = 0; dev->resource[i].end = 0; }}static void __initmvme5100_setup_bridge(void){ struct pci_controller* hose; hose = pcibios_alloc_controller(); if (!hose) return; hose->first_busno = 0; hose->last_busno = 0xff; hose->pci_mem_offset = MVME5100_PCI_MEM_OFFSET; pci_init_resource(&hose->io_resource, MVME5100_PCI_LOWER_IO, MVME5100_PCI_UPPER_IO, IORESOURCE_IO, "PCI host bridge"); pci_init_resource(&hose->mem_resources[0], MVME5100_PCI_LOWER_MEM, MVME5100_PCI_UPPER_MEM, IORESOURCE_MEM, "PCI host bridge"); hose->io_space.start = MVME5100_PCI_LOWER_IO; hose->io_space.end = MVME5100_PCI_UPPER_IO; hose->mem_space.start = MVME5100_PCI_LOWER_MEM; hose->mem_space.end = MVME5100_PCI_UPPER_MEM; hose->io_base_virt = (void *)MVME5100_ISA_IO_BASE; /* Use indirect method of Hawk */ setup_indirect_pci(hose, MVME5100_PCI_CONFIG_ADDR, MVME5100_PCI_CONFIG_DATA); hose->last_busno = pciauto_bus_scan(hose, hose->first_busno); ppc_md.pcibios_fixup_resources = mvme5100_pcibios_fixup_resources; ppc_md.pci_swizzle = common_swizzle; ppc_md.pci_map_irq = mvme5100_map_irq;}static void __initmvme5100_setup_arch(void){ if ( ppc_md.progress ) ppc_md.progress("mvme5100_setup_arch: enter", 0); loops_per_jiffy = 50000000 / HZ;#ifdef CONFIG_BLK_DEV_INITRD if (initrd_start) ROOT_DEV = Root_RAM0; else#endif#ifdef CONFIG_ROOT_NFS ROOT_DEV = Root_NFS;#else ROOT_DEV = Root_SDA2;#endif if ( ppc_md.progress ) ppc_md.progress("mvme5100_setup_arch: find_bridges", 0); /* Setup PCI host bridge */ mvme5100_setup_bridge(); /* Find and map our OpenPIC */ hawk_mpic_init(MVME5100_PCI_MEM_OFFSET); OpenPIC_InitSenses = mvme5100_openpic_initsenses; OpenPIC_NumInitSenses = sizeof(mvme5100_openpic_initsenses); printk("MVME5100 port (C) 2001 MontaVista Software, Inc. (source@mvista.com)\n"); if ( ppc_md.progress ) ppc_md.progress("mvme5100_setup_arch: exit", 0); return;}static void __initmvme5100_init2(void){#ifdef CONFIG_MVME5100_IPMC761_PRESENT request_region(0x00,0x20,"dma1"); request_region(0x20,0x20,"pic1"); request_region(0x40,0x20,"timer"); request_region(0x80,0x10,"dma page reg"); request_region(0xa0,0x20,"pic2"); request_region(0xc0,0x20,"dma2");#endif return;}/* * Interrupt setup and service. * Have MPIC on HAWK and cascaded 8259s on Winbond cascaded to MPIC. */static void __initmvme5100_init_IRQ(void){#ifdef CONFIG_MVME5100_IPMC761_PRESENT int i;#endif if ( ppc_md.progress ) ppc_md.progress("init_irq: enter", 0); openpic_set_sources(0, 16, OpenPIC_Addr + 0x10000);#ifdef CONFIG_MVME5100_IPMC761_PRESENT openpic_init(NUM_8259_INTERRUPTS); openpic_hookup_cascade(NUM_8259_INTERRUPTS, "82c59 cascade", &i8259_irq); i8259_init(0, 0);#else openpic_init(0);#endif if ( ppc_md.progress ) ppc_md.progress("init_irq: exit", 0); return;}/* * Set BAT 3 to map 0xf0000000 to end of physical memory space. */static __inline__ voidmvme5100_set_bat(void){ mb(); mtspr(SPRN_DBAT1U, 0xf0001ffe); mtspr(SPRN_DBAT1L, 0xf000002a); mb();}static unsigned long __initmvme5100_find_end_of_memory(void){ return hawk_get_mem_size(MVME5100_HAWK_SMC_BASE);}static void __initmvme5100_map_io(void){ io_block_mapping(0xfe000000, 0xfe000000, 0x02000000, _PAGE_IO); ioremap_base = 0xfe000000;}static voidmvme5100_reset_board(void){ local_irq_disable(); /* Set exception prefix high - to the firmware */ _nmask_and_or_msr(0, MSR_IP); out_8((u_char *)MVME5100_BOARD_MODRST_REG, 0x01); return;}static voidmvme5100_restart(char *cmd){ volatile ulong i = 10000000; mvme5100_reset_board(); while (i-- > 0); panic("restart failed\n");}static voidmvme5100_halt(void){ local_irq_disable(); while (1);}static voidmvme5100_power_off(void){ mvme5100_halt();}static intmvme5100_show_cpuinfo(struct seq_file *m){ seq_printf(m, "vendor\t\t: Motorola\n"); seq_printf(m, "machine\t\t: MVME5100\n"); return 0;}TODC_ALLOC();void __initplatform_init(unsigned long r3, unsigned long r4, unsigned long r5, unsigned long r6, unsigned long r7){ parse_bootinfo(find_bootinfo()); mvme5100_set_bat(); isa_io_base = MVME5100_ISA_IO_BASE; isa_mem_base = MVME5100_ISA_MEM_BASE; pci_dram_offset = MVME5100_PCI_DRAM_OFFSET; ppc_md.setup_arch = mvme5100_setup_arch; ppc_md.show_cpuinfo = mvme5100_show_cpuinfo; ppc_md.init_IRQ = mvme5100_init_IRQ; ppc_md.get_irq = openpic_get_irq; ppc_md.init = mvme5100_init2; ppc_md.restart = mvme5100_restart; ppc_md.power_off = mvme5100_power_off; ppc_md.halt = mvme5100_halt; ppc_md.find_end_of_memory = mvme5100_find_end_of_memory; ppc_md.setup_io_mappings = mvme5100_map_io; TODC_INIT(TODC_TYPE_MK48T37, MVME5100_NVRAM_AS0, MVME5100_NVRAM_AS1, MVME5100_NVRAM_DATA, 8); ppc_md.time_init = todc_time_init; ppc_md.set_rtc_time = todc_set_rtc_time; ppc_md.get_rtc_time = todc_get_rtc_time; ppc_md.calibrate_decr = todc_calibrate_decr; ppc_md.nvram_read_val = todc_m48txx_read_val; ppc_md.nvram_write_val = todc_m48txx_write_val;}
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -