📄 pplus.c
字号:
temp); }}void __init pplus_pcibios_fixup(void){ unsigned char reg; unsigned short devid; unsigned char base_mod; printk(KERN_INFO "Setting PCI interrupts for a \"%s\"\n", Motherboard_map_name); /* Setup the Winbond or Via PIB */ pplus_pib_init(); /* Set up floppy in PS/2 mode */ outb(0x09, SIO_CONFIG_RA); reg = inb(SIO_CONFIG_RD); reg = (reg & 0x3F) | 0x40; outb(reg, SIO_CONFIG_RD); outb(reg, SIO_CONFIG_RD); /* Have to write twice to change! */ /* This is a hack. If this is a 2300 or 2400 mot board then there is * no keyboard controller and we have to indicate that. */ early_read_config_word(0, 0, 0, PCI_VENDOR_ID, &devid); base_mod = inb(MOTOROLA_BASETYPE_REG); if ((devid == PCI_DEVICE_ID_MOTOROLA_HAWK) || (base_mod == 0xF9) || (base_mod == 0xFA) || (base_mod == 0xE1)) prep_keybd_present = 0;}void __init pplus_find_bridges(void){ struct pci_controller *hose; hose = pcibios_alloc_controller(); if (!hose) return; hose->first_busno = 0; hose->last_busno = 0xff; hose->pci_mem_offset = PREP_ISA_MEM_BASE; hose->io_base_virt = (void *)PREP_ISA_IO_BASE; pci_init_resource(&hose->io_resource, PPLUS_PCI_IO_START, PPLUS_PCI_IO_END, IORESOURCE_IO, "PCI host bridge"); pci_init_resource(&hose->mem_resources[0], PPLUS_PROC_PCI_MEM_START, PPLUS_PROC_PCI_MEM_END, IORESOURCE_MEM, "PCI host bridge"); hose->io_space.start = PPLUS_PCI_IO_START; hose->io_space.end = PPLUS_PCI_IO_END; hose->mem_space.start = PPLUS_PCI_MEM_START; hose->mem_space.end = PPLUS_PCI_MEM_END - HAWK_MPIC_SIZE; if (hawk_init(hose, PPLUS_HAWK_PPC_REG_BASE, PPLUS_PROC_PCI_MEM_START, PPLUS_PROC_PCI_MEM_END - HAWK_MPIC_SIZE, PPLUS_PROC_PCI_IO_START, PPLUS_PROC_PCI_IO_END, PPLUS_PROC_PCI_MEM_END - HAWK_MPIC_SIZE + 1) != 0) { printk(KERN_CRIT "Could not initialize host bridge\n"); } pplus_set_VIA_IDE_legacy(); hose->last_busno = pciauto_bus_scan(hose, hose->first_busno); ppc_md.pcibios_fixup = pplus_pcibios_fixup; ppc_md.pci_swizzle = common_swizzle;}static int pplus_show_cpuinfo(struct seq_file *m){ seq_printf(m, "vendor\t\t: Motorola MCG\n"); seq_printf(m, "machine\t\t: %s\n", Motherboard_map_name); return 0;}static void __init pplus_setup_arch(void){ struct pci_controller *hose; if (ppc_md.progress) ppc_md.progress("pplus_setup_arch: enter", 0); /* init to some ~sane value until calibrate_delay() runs */ loops_per_jiffy = 50000000; if (ppc_md.progress) ppc_md.progress("pplus_setup_arch: find_bridges", 0); /* Setup PCI host bridge */ pplus_find_bridges(); hose = pci_bus_to_hose(0); isa_io_base = (ulong) hose->io_base_virt; if (ppc_md.progress) ppc_md.progress("pplus_setup_arch: set_board_type", 0); pplus_set_board_type(); /* Enable L2. Assume we don't need to flush -- Cort */ *(unsigned char *)(PPLUS_L2_CONTROL_REG) |= 3;#ifdef CONFIG_BLK_DEV_INITRD if (initrd_start) ROOT_DEV = Root_RAM0; else#endif#ifdef CONFIG_ROOT_NFS ROOT_DEV = Root_NFS;#else ROOT_DEV = Root_SDA2;#endif printk(KERN_INFO "Motorola PowerPlus Platform\n"); printk(KERN_INFO "Port by MontaVista Software, Inc. (source@mvista.com)\n");#ifdef CONFIG_VGA_CONSOLE /* remap the VGA memory */ vgacon_remap_base = (unsigned long)ioremap(PPLUS_ISA_MEM_BASE, 0x08000000); conswitchp = &vga_con;#endif#ifdef CONFIG_PPCBUG_NVRAM /* Read in NVRAM data */ init_prep_nvram(); /* if no bootargs, look in NVRAM */ if (cmd_line[0] == '\0') { char *bootargs; bootargs = prep_nvram_get_var("bootargs"); if (bootargs != NULL) { strcpy(cmd_line, bootargs); /* again.. */ strcpy(saved_command_line, cmd_line); } }#endif if (ppc_md.progress) ppc_md.progress("pplus_setup_arch: exit", 0);}static void pplus_restart(char *cmd){ unsigned long i = 10000; local_irq_disable(); /* set VIA IDE controller into native mode */ pplus_set_VIA_IDE_native(); /* set exception prefix high - to the prom */ _nmask_and_or_msr(0, MSR_IP); /* make sure bit 0 (reset) is a 0 */ outb(inb(0x92) & ~1L, 0x92); /* signal a reset to system control port A - soft reset */ outb(inb(0x92) | 1, 0x92); while (i != 0) i++; panic("restart failed\n");}static void pplus_halt(void){ /* set exception prefix high - to the prom */ _nmask_and_or_msr(MSR_EE, MSR_IP); /* make sure bit 0 (reset) is a 0 */ outb(inb(0x92) & ~1L, 0x92); /* signal a reset to system control port A - soft reset */ outb(inb(0x92) | 1, 0x92); while (1) ; /* * Not reached */}static void pplus_power_off(void){ pplus_halt();}static void __init pplus_init_IRQ(void){ int i; if (ppc_md.progress) ppc_md.progress("init_irq: enter", 0); OpenPIC_InitSenses = pplus_openpic_initsenses; OpenPIC_NumInitSenses = sizeof(pplus_openpic_initsenses); if (OpenPIC_Addr != NULL) { openpic_set_sources(0, 16, OpenPIC_Addr + 0x10000); openpic_init(NUM_8259_INTERRUPTS); openpic_hookup_cascade(NUM_8259_INTERRUPTS, "82c59 cascade", i8259_irq); ppc_md.get_irq = openpic_get_irq; } i8259_init(0, 0); if (ppc_md.progress) ppc_md.progress("init_irq: exit", 0);}#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)/* * IDE stuff. */static int pplus_ide_default_irq(unsigned long base){ switch (base) { case 0x1f0: return 14; case 0x170: return 15; default: return 0; }}static unsigned long pplus_ide_default_io_base(int index){ switch (index) { case 0: return 0x1f0; case 1: return 0x170; default: return 0; }}static void __initpplus_ide_init_hwif_ports(hw_regs_t * hw, unsigned long data_port, unsigned long ctrl_port, int *irq){ unsigned long reg = data_port; int i; for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++) { hw->io_ports[i] = reg; reg += 1; } if (ctrl_port) hw->io_ports[IDE_CONTROL_OFFSET] = ctrl_port; else hw->io_ports[IDE_CONTROL_OFFSET] = hw->io_ports[IDE_DATA_OFFSET] + 0x206; if (irq != NULL) *irq = pplus_ide_default_irq(data_port);}#endif#ifdef CONFIG_SMP/* PowerPlus (MTX) support */static int __init smp_pplus_probe(void){ extern int mot_multi; if (mot_multi) { openpic_request_IPIs(); smp_hw_index[1] = 1; return 2; } return 1;}static void __init smp_pplus_kick_cpu(int nr){ *(unsigned long *)KERNELBASE = nr; asm volatile ("dcbf 0,%0"::"r" (KERNELBASE):"memory"); printk(KERN_INFO "CPU1 reset, waiting\n");}static void __init smp_pplus_setup_cpu(int cpu_nr){ if (OpenPIC_Addr) do_openpic_setup_cpu();}static struct smp_ops_t pplus_smp_ops = { smp_openpic_message_pass, smp_pplus_probe, smp_pplus_kick_cpu, smp_pplus_setup_cpu, .give_timebase = smp_generic_give_timebase, .take_timebase = smp_generic_take_timebase,};#endif /* CONFIG_SMP */#ifdef DUMP_DBATSstatic void print_dbat(int idx, u32 bat){ char str[64]; sprintf(str, "DBAT%c%c = 0x%08x\n", (char)((idx - DBAT0U) / 2) + '0', (idx & 1) ? 'L' : 'U', bat); ppc_md.progress(str, 0);}#define DUMP_DBAT(x) \ do { \ u32 __temp = mfspr(x);\ print_dbat(x, __temp); \ } while (0)static void dump_dbats(void){ if (ppc_md.progress) { DUMP_DBAT(DBAT0U); DUMP_DBAT(DBAT0L); DUMP_DBAT(DBAT1U); DUMP_DBAT(DBAT1L); DUMP_DBAT(DBAT2U); DUMP_DBAT(DBAT2L); DUMP_DBAT(DBAT3U); DUMP_DBAT(DBAT3L); }}#endifstatic unsigned long __init pplus_find_end_of_memory(void){ unsigned long total; if (ppc_md.progress) ppc_md.progress("pplus_find_end_of_memory", 0);#ifdef DUMP_DBATS dump_dbats();#endif total = hawk_get_mem_size(PPLUS_HAWK_SMC_BASE); return (total);}static void __init pplus_map_io(void){ io_block_mapping(PPLUS_ISA_IO_BASE, PPLUS_ISA_IO_BASE, 0x10000000, _PAGE_IO); io_block_mapping(0xfef80000, 0xfef80000, 0x00080000, _PAGE_IO);}static void __init pplus_init2(void){#ifdef CONFIG_NVRAM request_region(PREP_NVRAM_AS0, 0x8, "nvram");#endif request_region(0x20, 0x20, "pic1"); request_region(0xa0, 0x20, "pic2"); request_region(0x00, 0x20, "dma1"); request_region(0x40, 0x20, "timer"); request_region(0x80, 0x10, "dma page reg"); request_region(0xc0, 0x20, "dma2");}/* * Set BAT 2 to access 0x8000000 so progress messages will work and set BAT 3 * to 0xf0000000 to access Falcon/Raven or Hawk registers */static __inline__ void pplus_set_bat(void){ /* wait for all outstanding memory accesses to complete */ mb(); /* setup DBATs */ mtspr(SPRN_DBAT2U, 0x80001ffe); mtspr(SPRN_DBAT2L, 0x8000002a); mtspr(SPRN_DBAT3U, 0xf0001ffe); mtspr(SPRN_DBAT3L, 0xf000002a); /* wait for updates */ mb();}void __initplatform_init(unsigned long r3, unsigned long r4, unsigned long r5, unsigned long r6, unsigned long r7){ parse_bootinfo(find_bootinfo()); /* Map in board regs, etc. */ pplus_set_bat(); isa_io_base = PREP_ISA_IO_BASE; isa_mem_base = PREP_ISA_MEM_BASE; pci_dram_offset = PREP_PCI_DRAM_OFFSET; ISA_DMA_THRESHOLD = 0x00ffffff; DMA_MODE_READ = 0x44; DMA_MODE_WRITE = 0x48; ppc_do_canonicalize_irqs = 1; ppc_md.setup_arch = pplus_setup_arch; ppc_md.show_cpuinfo = pplus_show_cpuinfo; ppc_md.init_IRQ = pplus_init_IRQ; /* this gets changed later on if we have an OpenPIC -- Cort */ ppc_md.get_irq = i8259_irq; ppc_md.init = pplus_init2; ppc_md.restart = pplus_restart; ppc_md.power_off = pplus_power_off; ppc_md.halt = pplus_halt; TODC_INIT(TODC_TYPE_MK48T59, PREP_NVRAM_AS0, PREP_NVRAM_AS1, PREP_NVRAM_DATA, 8); ppc_md.time_init = todc_time_init; ppc_md.set_rtc_time = todc_set_rtc_time; ppc_md.get_rtc_time = todc_get_rtc_time; ppc_md.calibrate_decr = todc_calibrate_decr; ppc_md.nvram_read_val = todc_m48txx_read_val; ppc_md.nvram_write_val = todc_m48txx_write_val; ppc_md.find_end_of_memory = pplus_find_end_of_memory; ppc_md.setup_io_mappings = pplus_map_io;#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE) ppc_ide_md.default_irq = pplus_ide_default_irq; ppc_ide_md.default_io_base = pplus_ide_default_io_base; ppc_ide_md.ide_init_hwif = pplus_ide_init_hwif_ports;#endif#ifdef CONFIG_SERIAL_TEXT_DEBUG ppc_md.progress = gen550_progress;#endif /* CONFIG_SERIAL_TEXT_DEBUG */#ifdef CONFIG_KGDB ppc_md.kgdb_map_scc = gen550_kgdb_map_scc;#endif#ifdef CONFIG_SMP smp_ops = &pplus_smp_ops;#endif /* CONFIG_SMP */}
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -