📄 pplus.h
字号:
/* * arch/ppc/platforms/pplus.h * * Definitions for Motorola MCG Falcon/Raven & HAWK North Bridge & Memory ctlr. * * Author: Mark A. Greerinclude/asm-ppc/hawk.h * mgreer@mvista.com * * Modified by Randy Vinson (rvinson@mvista.com) * * 2001-2004 (c) MontaVista, Software, Inc. This file is licensed under * the terms of the GNU General Public License version 2. This program * is licensed "as is" without any warranty of any kind, whether express * or implied. */#ifndef __PPC_PPLUS_H#define __PPC_PPLUS_H#include <asm/io.h>/* * Due to limiations imposed by legacy hardware (primaryily IDE controllers), * the PPLUS boards operate using a PReP address map. * * From Processor (physical) -> PCI: * PCI Mem Space: 0xc0000000 - 0xfe000000 -> 0x00000000 - 0x3e000000 (768 MB) * PCI I/O Space: 0x80000000 - 0x90000000 -> 0x00000000 - 0x10000000 (256 MB) * Note: Must skip 0xfe000000-0xfe400000 for CONFIG_HIGHMEM/PKMAP area * * From PCI -> Processor (physical): * System Memory: 0x80000000 -> 0x00000000 */#define PPLUS_ISA_MEM_BASE PREP_ISA_MEM_BASE#define PPLUS_ISA_IO_BASE PREP_ISA_IO_BASE/* PCI Memory space mapping info */#define PPLUS_PCI_MEM_SIZE 0x30000000U#define PPLUS_PROC_PCI_MEM_START PPLUS_ISA_MEM_BASE#define PPLUS_PROC_PCI_MEM_END (PPLUS_PROC_PCI_MEM_START + \ PPLUS_PCI_MEM_SIZE - 1)#define PPLUS_PCI_MEM_START 0x00000000U#define PPLUS_PCI_MEM_END (PPLUS_PCI_MEM_START + \ PPLUS_PCI_MEM_SIZE - 1)/* PCI I/O space mapping info */#define PPLUS_PCI_IO_SIZE 0x10000000U#define PPLUS_PROC_PCI_IO_START PPLUS_ISA_IO_BASE#define PPLUS_PROC_PCI_IO_END (PPLUS_PROC_PCI_IO_START + \ PPLUS_PCI_IO_SIZE - 1)#define PPLUS_PCI_IO_START 0x00000000U#define PPLUS_PCI_IO_END (PPLUS_PCI_IO_START + \ PPLUS_PCI_IO_SIZE - 1)/* System memory mapping info */#define PPLUS_PCI_DRAM_OFFSET PREP_PCI_DRAM_OFFSET#define PPLUS_PCI_PHY_MEM_OFFSET (PPLUS_ISA_MEM_BASE-PPLUS_PCI_MEM_START)/* Define base addresses for important sets of registers */#define PPLUS_HAWK_SMC_BASE 0xfef80000U#define PPLUS_HAWK_PPC_REG_BASE 0xfeff0000U#define PPLUS_SYS_CONFIG_REG 0xfef80400U#define PPLUS_L2_CONTROL_REG 0x8000081cU#define PPLUS_VGA_MEM_BASE 0xf0000000U#endif /* __PPC_PPLUS_H */
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -