📄 reboot.c
字号:
/* Various gunk just to reboot the machine. */ #include <linux/module.h>#include <linux/reboot.h>#include <linux/init.h>#include <linux/smp.h>#include <linux/kernel.h>#include <linux/ctype.h>#include <linux/string.h>#include <asm/io.h>#include <asm/kdebug.h>#include <asm/delay.h>#include <asm/hw_irq.h>#include <asm/system.h>#include <asm/pgtable.h>#include <asm/tlbflush.h>#include <asm/apic.h>/* * Power off function, if any */void (*pm_power_off)(void);static long no_idt[3];static enum { BOOT_TRIPLE = 't', BOOT_KBD = 'k'} reboot_type = BOOT_KBD;static int reboot_mode = 0;int reboot_force;/* reboot=t[riple] | k[bd] [, [w]arm | [c]old] warm Don't set the cold reboot flag cold Set the cold reboot flag triple Force a triple fault (init) kbd Use the keyboard controller. cold reset (default) force Avoid anything that could hang. */ static int __init reboot_setup(char *str){ for (;;) { switch (*str) { case 'w': reboot_mode = 0x1234; break; case 'c': reboot_mode = 0; break; case 't': case 'b': case 'k': reboot_type = *str; break; case 'f': reboot_force = 1; break; } if((str = strchr(str,',')) != NULL) str++; else break; } return 1;}__setup("reboot=", reboot_setup);static inline void kb_wait(void){ int i; for (i=0; i<0x10000; i++) if ((inb_p(0x64) & 0x02) == 0) break;}void machine_shutdown(void){ unsigned long flags; /* Stop the cpus and apics */#ifdef CONFIG_SMP int reboot_cpu_id; /* The boot cpu is always logical cpu 0 */ reboot_cpu_id = 0; /* Make certain the cpu I'm about to reboot on is online */ if (!cpu_isset(reboot_cpu_id, cpu_online_map)) { reboot_cpu_id = smp_processor_id(); } /* Make certain I only run on the appropriate processor */ set_cpus_allowed(current, cpumask_of_cpu(reboot_cpu_id)); /* O.K Now that I'm on the appropriate processor, * stop all of the others. */ smp_send_stop();#endif local_irq_save(flags);#ifndef CONFIG_SMP disable_local_APIC();#endif disable_IO_APIC(); local_irq_restore(flags);}void machine_emergency_restart(void){ int i; /* Tell the BIOS if we want cold or warm reboot */ *((unsigned short *)__va(0x472)) = reboot_mode; for (;;) { /* Could also try the reset bit in the Hammer NB */ switch (reboot_type) { case BOOT_KBD: for (i=0; i<10; i++) { kb_wait(); udelay(50); outb(0xfe,0x64); /* pulse reset low */ udelay(50); } case BOOT_TRIPLE: __asm__ __volatile__("lidt (%0)": :"r" (&no_idt)); __asm__ __volatile__("int3"); reboot_type = BOOT_KBD; break; } } }void machine_restart(char * __unused){ printk("machine restart\n"); if (!reboot_force) { machine_shutdown(); } machine_emergency_restart();}void machine_halt(void){}void machine_power_off(void){ if (!reboot_force) { machine_shutdown(); } if (pm_power_off) pm_power_off();}
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -