⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 setup.c

📁 linux-2.6.15.6
💻 C
字号:
/*  $Id: setup.c,v 1.126 2001/11/13 00:49:27 davem Exp $ *  linux/arch/sparc/kernel/setup.c * *  Copyright (C) 1995  David S. Miller (davem@caip.rutgers.edu) *  Copyright (C) 2000  Anton Blanchard (anton@samba.org) */#include <linux/errno.h>#include <linux/sched.h>#include <linux/kernel.h>#include <linux/mm.h>#include <linux/stddef.h>#include <linux/unistd.h>#include <linux/ptrace.h>#include <linux/slab.h>#include <linux/initrd.h>#include <asm/smp.h>#include <linux/user.h>#include <linux/a.out.h>#include <linux/tty.h>#include <linux/delay.h>#include <linux/config.h>#include <linux/fs.h>#include <linux/seq_file.h>#include <linux/syscalls.h>#include <linux/kdev_t.h>#include <linux/major.h>#include <linux/string.h>#include <linux/init.h>#include <linux/interrupt.h>#include <linux/console.h>#include <linux/spinlock.h>#include <linux/root_dev.h>#include <asm/system.h>#include <asm/io.h>#include <asm/processor.h>#include <asm/oplib.h>#include <asm/page.h>#include <asm/pgtable.h>#include <asm/traps.h>#include <asm/vaddrs.h>#include <asm/kdebug.h>#include <asm/mbus.h>#include <asm/idprom.h>#include <asm/machines.h>#include <asm/cpudata.h>#include <asm/setup.h>struct screen_info screen_info = {	0, 0,			/* orig-x, orig-y */	0,			/* unused */	0,			/* orig-video-page */	0,			/* orig-video-mode */	128,			/* orig-video-cols */	0,0,0,			/* ega_ax, ega_bx, ega_cx */	54,			/* orig-video-lines */	0,                      /* orig-video-isVGA */	16                      /* orig-video-points */};/* Typing sync at the prom prompt calls the function pointed to by * romvec->pv_synchook which I set to the following function. * This should sync all filesystems and return, for now it just * prints out pretty messages and returns. */extern unsigned long trapbase;void (*prom_palette)(int);/* Pretty sick eh? */void prom_sync_me(void){	unsigned long prom_tbr, flags;	/* XXX Badly broken. FIX! - Anton */	local_irq_save(flags);	__asm__ __volatile__("rd %%tbr, %0\n\t" : "=r" (prom_tbr));	__asm__ __volatile__("wr %0, 0x0, %%tbr\n\t"			     "nop\n\t"			     "nop\n\t"			     "nop\n\t" : : "r" (&trapbase));	if (prom_palette)		prom_palette(1);	prom_printf("PROM SYNC COMMAND...\n");	show_free_areas();	if(current->pid != 0) {		local_irq_enable();		sys_sync();		local_irq_disable();	}	prom_printf("Returning to prom\n");	__asm__ __volatile__("wr %0, 0x0, %%tbr\n\t"			     "nop\n\t"			     "nop\n\t"			     "nop\n\t" : : "r" (prom_tbr));	local_irq_restore(flags);	return;}unsigned int boot_flags __initdata = 0;#define BOOTME_DEBUG  0x1#define BOOTME_SINGLE 0x2/* Exported for mm/init.c:paging_init. */unsigned long cmdline_memory_size __initdata = 0;static voidprom_console_write(struct console *con, const char *s, unsigned n){	prom_write(s, n);}static struct console prom_debug_console = {	.name =		"debug",	.write =	prom_console_write,	.flags =	CON_PRINTBUFFER,	.index =	-1,};int obp_system_intr(void){	if (boot_flags & BOOTME_DEBUG) {		printk("OBP: system interrupted\n");		prom_halt();		return 1;	}	return 0;}/*  * Process kernel command line switches that are specific to the * SPARC or that require special low-level processing. */static void __init process_switch(char c){	switch (c) {	case 'd':		boot_flags |= BOOTME_DEBUG;		break;	case 's':		boot_flags |= BOOTME_SINGLE;		break;	case 'h':		prom_printf("boot_flags_init: Halt!\n");		prom_halt();		break;	case 'p':		/* Use PROM debug console. */		register_console(&prom_debug_console);		break;	default:		printk("Unknown boot switch (-%c)\n", c);		break;	}}static void __init process_console(char *commands){	serial_console = 0;	commands += 8;	/* Linux-style serial */	if (!strncmp(commands, "ttyS", 4))		serial_console = simple_strtoul(commands + 4, NULL, 10) + 1;	else if (!strncmp(commands, "tty", 3)) {		char c = *(commands + 3);		/* Solaris-style serial */		if (c == 'a' || c == 'b')			serial_console = c - 'a' + 1;		/* else Linux-style fbcon, not serial */	}#if defined(CONFIG_PROM_CONSOLE)	if (!strncmp(commands, "prom", 4)) {		char *p;		for (p = commands - 8; *p && *p != ' '; p++)			*p = ' ';		conswitchp = &prom_con;	}#endif}static void __init boot_flags_init(char *commands){	while (*commands) {		/* Move to the start of the next "argument". */		while (*commands && *commands == ' ')			commands++;		/* Process any command switches, otherwise skip it. */		if (*commands == '\0')			break;		if (*commands == '-') {			commands++;			while (*commands && *commands != ' ')				process_switch(*commands++);			continue;		}		if (!strncmp(commands, "console=", 8)) {			process_console(commands);		} else if (!strncmp(commands, "mem=", 4)) {			/*			 * "mem=XXX[kKmM] overrides the PROM-reported			 * memory size.			 */			cmdline_memory_size = simple_strtoul(commands + 4,						     &commands, 0);			if (*commands == 'K' || *commands == 'k') {				cmdline_memory_size <<= 10;				commands++;			} else if (*commands=='M' || *commands=='m') {				cmdline_memory_size <<= 20;				commands++;			}		}		while (*commands && *commands != ' ')			commands++;	}}/* This routine will in the future do all the nasty prom stuff * to probe for the mmu type and its parameters, etc. This will * also be where SMP things happen plus the Sparc specific memory * physical memory probe as on the alpha. */extern int prom_probe_memory(void);extern void sun4c_probe_vac(void);extern char cputypval;extern unsigned long start, end;extern void panic_setup(char *, int *);extern unsigned short root_flags;extern unsigned short root_dev;extern unsigned short ram_flags;#define RAMDISK_IMAGE_START_MASK	0x07FF#define RAMDISK_PROMPT_FLAG		0x8000#define RAMDISK_LOAD_FLAG		0x4000extern int root_mountflags;char reboot_command[COMMAND_LINE_SIZE];enum sparc_cpu sparc_cpu_model;struct tt_entry *sparc_ttable;struct pt_regs fake_swapper_regs;void __init setup_arch(char **cmdline_p){	int i;	unsigned long highest_paddr;	sparc_ttable = (struct tt_entry *) &start;	/* Initialize PROM console and command line. */	*cmdline_p = prom_getbootargs();	strcpy(saved_command_line, *cmdline_p);	/* Set sparc_cpu_model */	sparc_cpu_model = sun_unknown;	if(!strcmp(&cputypval,"sun4 ")) { sparc_cpu_model=sun4; }	if(!strcmp(&cputypval,"sun4c")) { sparc_cpu_model=sun4c; }	if(!strcmp(&cputypval,"sun4m")) { sparc_cpu_model=sun4m; }	if(!strcmp(&cputypval,"sun4s")) { sparc_cpu_model=sun4m; }  /* CP-1200 with PROM 2.30 -E */	if(!strcmp(&cputypval,"sun4d")) { sparc_cpu_model=sun4d; }	if(!strcmp(&cputypval,"sun4e")) { sparc_cpu_model=sun4e; }	if(!strcmp(&cputypval,"sun4u")) { sparc_cpu_model=sun4u; }#ifdef CONFIG_SUN4	if (sparc_cpu_model != sun4) {		prom_printf("This kernel is for Sun4 architecture only.\n");		prom_halt();	}#endif	printk("ARCH: ");	switch(sparc_cpu_model) {	case sun4:		printk("SUN4\n");		break;	case sun4c:		printk("SUN4C\n");		break;	case sun4m:		printk("SUN4M\n");		break;	case sun4d:		printk("SUN4D\n");		break;	case sun4e:		printk("SUN4E\n");		break;	case sun4u:		printk("SUN4U\n");		break;	default:		printk("UNKNOWN!\n");		break;	};#ifdef CONFIG_DUMMY_CONSOLE	conswitchp = &dummy_con;#elif defined(CONFIG_PROM_CONSOLE)	conswitchp = &prom_con;#endif	boot_flags_init(*cmdline_p);	idprom_init();	if (ARCH_SUN4C_SUN4)		sun4c_probe_vac();	load_mmu();	(void) prom_probe_memory();	phys_base = 0xffffffffUL;	highest_paddr = 0UL;	for (i = 0; sp_banks[i].num_bytes != 0; i++) {		unsigned long top;		if (sp_banks[i].base_addr < phys_base)			phys_base = sp_banks[i].base_addr;		top = sp_banks[i].base_addr +			sp_banks[i].num_bytes;		if (highest_paddr < top)			highest_paddr = top;	}	pfn_base = phys_base >> PAGE_SHIFT;	if (!root_flags)		root_mountflags &= ~MS_RDONLY;	ROOT_DEV = old_decode_dev(root_dev);#ifdef CONFIG_BLK_DEV_INITRD	rd_image_start = ram_flags & RAMDISK_IMAGE_START_MASK;	rd_prompt = ((ram_flags & RAMDISK_PROMPT_FLAG) != 0);	rd_doload = ((ram_flags & RAMDISK_LOAD_FLAG) != 0);	#endif	prom_setsync(prom_sync_me);	if((boot_flags&BOOTME_DEBUG) && (linux_dbvec!=0) && 	   ((*(short *)linux_dbvec) != -1)) {		printk("Booted under KADB. Syncing trap table.\n");		(*(linux_dbvec->teach_debugger))();	}	init_mm.context = (unsigned long) NO_CONTEXT;	init_task.thread.kregs = &fake_swapper_regs;	paging_init();}static int __init set_preferred_console(void){	int idev, odev;	/* The user has requested a console so this is already set up. */	if (serial_console >= 0)		return -EBUSY;	idev = prom_query_input_device();	odev = prom_query_output_device();	if (idev == PROMDEV_IKBD && odev == PROMDEV_OSCREEN) {		serial_console = 0;	} else if (idev == PROMDEV_ITTYA && odev == PROMDEV_OTTYA) {		serial_console = 1;	} else if (idev == PROMDEV_ITTYB && odev == PROMDEV_OTTYB) {		serial_console = 2;	} else if (idev == PROMDEV_I_UNK && odev == PROMDEV_OTTYA) {		prom_printf("MrCoffee ttya\n");		serial_console = 1;	} else if (idev == PROMDEV_I_UNK && odev == PROMDEV_OSCREEN) {		serial_console = 0;		prom_printf("MrCoffee keyboard\n");	} else {		prom_printf("Confusing console (idev %d, odev %d)\n",		    idev, odev);		serial_console = 1;	}	if (serial_console)		return add_preferred_console("ttyS", serial_console - 1, NULL);	return -ENODEV;}console_initcall(set_preferred_console);extern char *sparc_cpu_type;extern char *sparc_fpu_type;static int show_cpuinfo(struct seq_file *m, void *__unused){	seq_printf(m,		   "cpu\t\t: %s\n"		   "fpu\t\t: %s\n"		   "promlib\t\t: Version %d Revision %d\n"		   "prom\t\t: %d.%d\n"		   "type\t\t: %s\n"		   "ncpus probed\t: %d\n"		   "ncpus active\t: %d\n"#ifndef CONFIG_SMP		   "CPU0Bogo\t: %lu.%02lu\n"		   "CPU0ClkTck\t: %ld\n"#endif		   ,		   sparc_cpu_type ? sparc_cpu_type : "undetermined",		   sparc_fpu_type ? sparc_fpu_type : "undetermined",		   romvec->pv_romvers,		   prom_rev,		   romvec->pv_printrev >> 16,		   romvec->pv_printrev & 0xffff,		   &cputypval,		   num_possible_cpus(),		   num_online_cpus()#ifndef CONFIG_SMP		   , cpu_data(0).udelay_val/(500000/HZ),		   (cpu_data(0).udelay_val/(5000/HZ)) % 100,		   cpu_data(0).clock_tick#endif		);#ifdef CONFIG_SMP	smp_bogo(m);#endif	mmu_info(m);#ifdef CONFIG_SMP	smp_info(m);#endif	return 0;}static void *c_start(struct seq_file *m, loff_t *pos){	/* The pointer we are returning is arbitrary,	 * it just has to be non-NULL and not IS_ERR	 * in the success case.	 */	return *pos == 0 ? &c_start : NULL;}static void *c_next(struct seq_file *m, void *v, loff_t *pos){	++*pos;	return c_start(m, pos);}static void c_stop(struct seq_file *m, void *v){}struct seq_operations cpuinfo_op = {	.start =c_start,	.next =	c_next,	.stop =	c_stop,	.show =	show_cpuinfo,};extern int stop_a_enabled;void sun_do_break(void){	if (!stop_a_enabled)		return;	printk("\n");	flush_user_windows();	prom_cmdline();}int serial_console = -1;int stop_a_enabled = 1;

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -