⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 op_model_rs64.c

📁 linux-2.6.15.6
💻 C
字号:
/* * Copyright (C) 2004 Anton Blanchard <anton@au.ibm.com>, IBM * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. */#include <linux/oprofile.h>#include <linux/init.h>#include <linux/smp.h>#include <asm/ptrace.h>#include <asm/system.h>#include <asm/processor.h>#include <asm/cputable.h>#include <asm/oprofile_impl.h>#define dbg(args...)static void ctrl_write(unsigned int i, unsigned int val){	unsigned int tmp = 0;	unsigned long shift = 0, mask = 0;	dbg("ctrl_write %d %x\n", i, val);	switch(i) {	case 0:		tmp = mfspr(SPRN_MMCR0);		shift = 6;		mask = 0x7F;		break;	case 1:		tmp = mfspr(SPRN_MMCR0);		shift = 0;		mask = 0x3F;		break;	case 2:		tmp = mfspr(SPRN_MMCR1);		shift = 31 - 4;		mask = 0x1F;		break;	case 3:		tmp = mfspr(SPRN_MMCR1);		shift = 31 - 9;		mask = 0x1F;		break;	case 4:		tmp = mfspr(SPRN_MMCR1);		shift = 31 - 14;		mask = 0x1F;		break;	case 5:		tmp = mfspr(SPRN_MMCR1);		shift = 31 - 19;		mask = 0x1F;		break;	case 6:		tmp = mfspr(SPRN_MMCR1);		shift = 31 - 24;		mask = 0x1F;		break;	case 7:		tmp = mfspr(SPRN_MMCR1);		shift = 31 - 28;		mask = 0xF;		break;	}	tmp = tmp & ~(mask << shift);	tmp |= val << shift;	switch(i) {		case 0:		case 1:			mtspr(SPRN_MMCR0, tmp);			break;		default:			mtspr(SPRN_MMCR1, tmp);	}	dbg("ctrl_write mmcr0 %lx mmcr1 %lx\n", mfspr(SPRN_MMCR0),	       mfspr(SPRN_MMCR1));}static unsigned long reset_value[OP_MAX_COUNTER];static int num_counters;static void rs64_reg_setup(struct op_counter_config *ctr,			   struct op_system_config *sys,			   int num_ctrs){	int i;	num_counters = num_ctrs;	for (i = 0; i < num_counters; ++i)		reset_value[i] = 0x80000000UL - ctr[i].count;	/* XXX setup user and kernel profiling */}static void rs64_cpu_setup(void *unused){	unsigned int mmcr0;	/* reset MMCR0 and set the freeze bit */	mmcr0 = MMCR0_FC;	mtspr(SPRN_MMCR0, mmcr0);	/* reset MMCR1, MMCRA */	mtspr(SPRN_MMCR1, 0);	if (cpu_has_feature(CPU_FTR_MMCRA))		mtspr(SPRN_MMCRA, 0);	mmcr0 |= MMCR0_FCM1|MMCR0_PMXE|MMCR0_FCECE;	/* Only applies to POWER3, but should be safe on RS64 */	mmcr0 |= MMCR0_PMC1CE|MMCR0_PMCjCE;	mtspr(SPRN_MMCR0, mmcr0);	dbg("setup on cpu %d, mmcr0 %lx\n", smp_processor_id(),	    mfspr(SPRN_MMCR0));	dbg("setup on cpu %d, mmcr1 %lx\n", smp_processor_id(),	    mfspr(SPRN_MMCR1));}static void rs64_start(struct op_counter_config *ctr){	int i;	unsigned int mmcr0;	/* set the PMM bit (see comment below) */	mtmsrd(mfmsr() | MSR_PMM);	for (i = 0; i < num_counters; ++i) {		if (ctr[i].enabled) {			ctr_write(i, reset_value[i]);			ctrl_write(i, ctr[i].event);		} else {			ctr_write(i, 0);		}	}	mmcr0 = mfspr(SPRN_MMCR0);	/*	 * now clear the freeze bit, counting will not start until we	 * rfid from this excetion, because only at that point will	 * the PMM bit be cleared	 */	mmcr0 &= ~MMCR0_FC;	mtspr(SPRN_MMCR0, mmcr0);	dbg("start on cpu %d, mmcr0 %x\n", smp_processor_id(), mmcr0);}static void rs64_stop(void){	unsigned int mmcr0;	/* freeze counters */	mmcr0 = mfspr(SPRN_MMCR0);	mmcr0 |= MMCR0_FC;	mtspr(SPRN_MMCR0, mmcr0);	dbg("stop on cpu %d, mmcr0 %x\n", smp_processor_id(), mmcr0);	mb();}static void rs64_handle_interrupt(struct pt_regs *regs,				  struct op_counter_config *ctr){	unsigned int mmcr0;	int val;	int i;	unsigned long pc = mfspr(SPRN_SIAR);	int is_kernel = (pc >= KERNELBASE);	/* set the PMM bit (see comment below) */	mtmsrd(mfmsr() | MSR_PMM);	for (i = 0; i < num_counters; ++i) {		val = ctr_read(i);		if (val < 0) {			if (ctr[i].enabled) {				oprofile_add_pc(pc, is_kernel, i);				ctr_write(i, reset_value[i]);			} else {				ctr_write(i, 0);			}		}	}	mmcr0 = mfspr(SPRN_MMCR0);	/* reset the perfmon trigger */	mmcr0 |= MMCR0_PMXE;	/*	 * now clear the freeze bit, counting will not start until we	 * rfid from this exception, because only at that point will	 * the PMM bit be cleared	 */	mmcr0 &= ~MMCR0_FC;	mtspr(SPRN_MMCR0, mmcr0);}struct op_powerpc_model op_model_rs64 = {	.reg_setup		= rs64_reg_setup,	.cpu_setup		= rs64_cpu_setup,	.start			= rs64_start,	.stop			= rs64_stop,	.handle_interrupt	= rs64_handle_interrupt,};

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -