⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 i8259.c

📁 linux-2.6.15.6
💻 C
字号:
/* * i8259 interrupt controller driver. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. */#include <linux/init.h>#include <linux/ioport.h>#include <linux/interrupt.h>#include <asm/io.h>#include <asm/i8259.h>static volatile void __iomem *pci_intack; /* RO, gives us the irq vector */static unsigned char cached_8259[2] = { 0xff, 0xff };#define cached_A1 (cached_8259[0])#define cached_21 (cached_8259[1])static DEFINE_SPINLOCK(i8259_lock);static int i8259_pic_irq_offset;/* * Acknowledge the IRQ using either the PCI host bridge's interrupt * acknowledge feature or poll.  How i8259_init() is called determines * which is called.  It should be noted that polling is broken on some * IBM and Motorola PReP boxes so we must use the int-ack feature on them. */int i8259_irq(struct pt_regs *regs){	int irq;	spin_lock(&i8259_lock);	/* Either int-ack or poll for the IRQ */	if (pci_intack)		irq = readb(pci_intack);	else {		/* Perform an interrupt acknowledge cycle on controller 1. */		outb(0x0C, 0x20);		/* prepare for poll */		irq = inb(0x20) & 7;		if (irq == 2 ) {			/*			 * Interrupt is cascaded so perform interrupt			 * acknowledge on controller 2.			 */			outb(0x0C, 0xA0);	/* prepare for poll */			irq = (inb(0xA0) & 7) + 8;		}	}	if (irq == 7) {		/*		 * This may be a spurious interrupt.		 *		 * Read the interrupt status register (ISR). If the most		 * significant bit is not set then there is no valid		 * interrupt.		 */		if (!pci_intack)			outb(0x0B, 0x20);	/* ISR register */		if(~inb(0x20) & 0x80)			irq = -1;	}	spin_unlock(&i8259_lock);	return irq + i8259_pic_irq_offset;}int i8259_irq_cascade(struct pt_regs *regs, void *unused){	return i8259_irq(regs);}static void i8259_mask_and_ack_irq(unsigned int irq_nr){	unsigned long flags;	spin_lock_irqsave(&i8259_lock, flags);	irq_nr -= i8259_pic_irq_offset;	if (irq_nr > 7) {		cached_A1 |= 1 << (irq_nr-8);		inb(0xA1); 	/* DUMMY */		outb(cached_A1, 0xA1);		outb(0x20, 0xA0);	/* Non-specific EOI */		outb(0x20, 0x20);	/* Non-specific EOI to cascade */	} else {		cached_21 |= 1 << irq_nr;		inb(0x21); 	/* DUMMY */		outb(cached_21, 0x21);		outb(0x20, 0x20);	/* Non-specific EOI */	}	spin_unlock_irqrestore(&i8259_lock, flags);}static void i8259_set_irq_mask(int irq_nr){	outb(cached_A1,0xA1);	outb(cached_21,0x21);}static void i8259_mask_irq(unsigned int irq_nr){	unsigned long flags;	spin_lock_irqsave(&i8259_lock, flags);	irq_nr -= i8259_pic_irq_offset;	if (irq_nr < 8)		cached_21 |= 1 << irq_nr;	else		cached_A1 |= 1 << (irq_nr-8);	i8259_set_irq_mask(irq_nr);	spin_unlock_irqrestore(&i8259_lock, flags);}static void i8259_unmask_irq(unsigned int irq_nr){	unsigned long flags;	spin_lock_irqsave(&i8259_lock, flags);	irq_nr -= i8259_pic_irq_offset;	if (irq_nr < 8)		cached_21 &= ~(1 << irq_nr);	else		cached_A1 &= ~(1 << (irq_nr-8));	i8259_set_irq_mask(irq_nr);	spin_unlock_irqrestore(&i8259_lock, flags);}static void i8259_end_irq(unsigned int irq){	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))	    && irq_desc[irq].action)		i8259_unmask_irq(irq);}struct hw_interrupt_type i8259_pic = {	.typename = " i8259    ",	.enable = i8259_unmask_irq,	.disable = i8259_mask_irq,	.ack = i8259_mask_and_ack_irq,	.end = i8259_end_irq,};static struct resource pic1_iores = {	.name = "8259 (master)",	.start = 0x20,	.end = 0x21,	.flags = IORESOURCE_BUSY,};static struct resource pic2_iores = {	.name = "8259 (slave)",	.start = 0xa0,	.end = 0xa1,	.flags = IORESOURCE_BUSY,};static struct resource pic_edgectrl_iores = {	.name = "8259 edge control",	.start = 0x4d0,	.end = 0x4d1,	.flags = IORESOURCE_BUSY,};static struct irqaction i8259_irqaction = {	.handler = no_action,	.flags = SA_INTERRUPT,	.mask = CPU_MASK_NONE,	.name = "82c59 secondary cascade",};/* * i8259_init() * intack_addr - PCI interrupt acknowledge (real) address which will return *               the active irq from the 8259 */void __init i8259_init(unsigned long intack_addr, int offset){	unsigned long flags;	int i;	spin_lock_irqsave(&i8259_lock, flags);	i8259_pic_irq_offset = offset;	/* init master interrupt controller */	outb(0x11, 0x20); /* Start init sequence */	outb(0x00, 0x21); /* Vector base */	outb(0x04, 0x21); /* edge tiggered, Cascade (slave) on IRQ2 */	outb(0x01, 0x21); /* Select 8086 mode */	/* init slave interrupt controller */	outb(0x11, 0xA0); /* Start init sequence */	outb(0x08, 0xA1); /* Vector base */	outb(0x02, 0xA1); /* edge triggered, Cascade (slave) on IRQ2 */	outb(0x01, 0xA1); /* Select 8086 mode */	/* always read ISR */	outb(0x0B, 0x20);	outb(0x0B, 0xA0);	/* Mask all interrupts */	outb(cached_A1, 0xA1);	outb(cached_21, 0x21);	spin_unlock_irqrestore(&i8259_lock, flags);	for (i = 0; i < NUM_ISA_INTERRUPTS; ++i)		irq_desc[offset + i].handler = &i8259_pic;	/* reserve our resources */	setup_irq(offset + 2, &i8259_irqaction);	request_resource(&ioport_resource, &pic1_iores);	request_resource(&ioport_resource, &pic2_iores);	request_resource(&ioport_resource, &pic_edgectrl_iores);	if (intack_addr != 0)		pci_intack = ioremap(intack_addr, 1);}

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -