📄 lpar.c
字号:
/* * pSeries_lpar.c * Copyright (C) 2001 Todd Inglett, IBM Corporation * * pSeries LPAR support. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */#undef DEBUG_LOW#include <linux/config.h>#include <linux/kernel.h>#include <linux/dma-mapping.h>#include <asm/processor.h>#include <asm/mmu.h>#include <asm/page.h>#include <asm/pgtable.h>#include <asm/machdep.h>#include <asm/abs_addr.h>#include <asm/mmu_context.h>#include <asm/iommu.h>#include <asm/tlbflush.h>#include <asm/tlb.h>#include <asm/prom.h>#include <asm/abs_addr.h>#include <asm/cputable.h>#include <asm/udbg.h>#include <asm/smp.h>#include "plpar_wrappers.h"#ifdef DEBUG_LOW#define DBG_LOW(fmt...) do { udbg_printf(fmt); } while(0)#else#define DBG_LOW(fmt...) do { } while(0)#endif/* in pSeries_hvCall.S */EXPORT_SYMBOL(plpar_hcall);EXPORT_SYMBOL(plpar_hcall_4out);EXPORT_SYMBOL(plpar_hcall_norets);EXPORT_SYMBOL(plpar_hcall_8arg_2ret);extern void pSeries_find_serial_port(void);int vtermno; /* virtual terminal# for udbg */#define __ALIGNED__ __attribute__((__aligned__(sizeof(long))))static void udbg_hvsi_putc(unsigned char c){ /* packet's seqno isn't used anyways */ uint8_t packet[] __ALIGNED__ = { 0xff, 5, 0, 0, c }; int rc; if (c == '\n') udbg_hvsi_putc('\r'); do { rc = plpar_put_term_char(vtermno, sizeof(packet), packet); } while (rc == H_Busy);}static long hvsi_udbg_buf_len;static uint8_t hvsi_udbg_buf[256];static int udbg_hvsi_getc_poll(void){ unsigned char ch; int rc, i; if (hvsi_udbg_buf_len == 0) { rc = plpar_get_term_char(vtermno, &hvsi_udbg_buf_len, hvsi_udbg_buf); if (rc != H_Success || hvsi_udbg_buf[0] != 0xff) { /* bad read or non-data packet */ hvsi_udbg_buf_len = 0; } else { /* remove the packet header */ for (i = 4; i < hvsi_udbg_buf_len; i++) hvsi_udbg_buf[i-4] = hvsi_udbg_buf[i]; hvsi_udbg_buf_len -= 4; } } if (hvsi_udbg_buf_len <= 0 || hvsi_udbg_buf_len > 256) { /* no data ready */ hvsi_udbg_buf_len = 0; return -1; } ch = hvsi_udbg_buf[0]; /* shift remaining data down */ for (i = 1; i < hvsi_udbg_buf_len; i++) { hvsi_udbg_buf[i-1] = hvsi_udbg_buf[i]; } hvsi_udbg_buf_len--; return ch;}static unsigned char udbg_hvsi_getc(void){ int ch; for (;;) { ch = udbg_hvsi_getc_poll(); if (ch == -1) { /* This shouldn't be needed...but... */ volatile unsigned long delay; for (delay=0; delay < 2000000; delay++) ; } else { return ch; } }}static void udbg_putcLP(unsigned char c){ char buf[16]; unsigned long rc; if (c == '\n') udbg_putcLP('\r'); buf[0] = c; do { rc = plpar_put_term_char(vtermno, 1, buf); } while(rc == H_Busy);}/* Buffered chars getc */static long inbuflen;static long inbuf[2]; /* must be 2 longs */static int udbg_getc_pollLP(void){ /* The interface is tricky because it may return up to 16 chars. * We save them statically for future calls to udbg_getc(). */ char ch, *buf = (char *)inbuf; int i; long rc; if (inbuflen == 0) { /* get some more chars. */ inbuflen = 0; rc = plpar_get_term_char(vtermno, &inbuflen, buf); if (rc != H_Success) inbuflen = 0; /* otherwise inbuflen is garbage */ } if (inbuflen <= 0 || inbuflen > 16) { /* Catch error case as well as other oddities (corruption) */ inbuflen = 0; return -1; } ch = buf[0]; for (i = 1; i < inbuflen; i++) /* shuffle them down. */ buf[i-1] = buf[i]; inbuflen--; return ch;}static unsigned char udbg_getcLP(void){ int ch; for (;;) { ch = udbg_getc_pollLP(); if (ch == -1) { /* This shouldn't be needed...but... */ volatile unsigned long delay; for (delay=0; delay < 2000000; delay++) ; } else { return ch; } }}/* call this from early_init() for a working debug console on * vterm capable LPAR machines */void udbg_init_debug_lpar(void){ vtermno = 0; udbg_putc = udbg_putcLP; udbg_getc = udbg_getcLP; udbg_getc_poll = udbg_getc_pollLP;}/* returns 0 if couldn't find or use /chosen/stdout as console */int find_udbg_vterm(void){ struct device_node *stdout_node; u32 *termno; char *name; int found = 0; /* find the boot console from /chosen/stdout */ if (!of_chosen) return 0; name = (char *)get_property(of_chosen, "linux,stdout-path", NULL); if (name == NULL) return 0; stdout_node = of_find_node_by_path(name); if (!stdout_node) return 0; /* now we have the stdout node; figure out what type of device it is. */ name = (char *)get_property(stdout_node, "name", NULL); if (!name) { printk(KERN_WARNING "stdout node missing 'name' property!\n"); goto out; } if (strncmp(name, "vty", 3) == 0) { if (device_is_compatible(stdout_node, "hvterm1")) { termno = (u32 *)get_property(stdout_node, "reg", NULL); if (termno) { vtermno = termno[0]; udbg_putc = udbg_putcLP; udbg_getc = udbg_getcLP; udbg_getc_poll = udbg_getc_pollLP; found = 1; } } else if (device_is_compatible(stdout_node, "hvterm-protocol")) { termno = (u32 *)get_property(stdout_node, "reg", NULL); if (termno) { vtermno = termno[0]; udbg_putc = udbg_hvsi_putc; udbg_getc = udbg_hvsi_getc; udbg_getc_poll = udbg_hvsi_getc_poll; found = 1; } } } else if (strncmp(name, "serial", 6)) { /* XXX fix ISA serial console */ printk(KERN_WARNING "serial stdout on LPAR ('%s')! " "can't print udbg messages\n", stdout_node->full_name); } else { printk(KERN_WARNING "don't know how to print to stdout '%s'\n", stdout_node->full_name); }out: of_node_put(stdout_node); return found;}void vpa_init(int cpu){ int hwcpu = get_hard_smp_processor_id(cpu); unsigned long vpa = __pa(&paca[cpu].lppaca); long ret; if (cpu_has_feature(CPU_FTR_ALTIVEC)) paca[cpu].lppaca.vmxregs_in_use = 1; ret = register_vpa(hwcpu, vpa); if (ret) printk(KERN_ERR "WARNING: vpa_init: VPA registration for " "cpu %d (hw %d) of area %lx returns %ld\n", cpu, hwcpu, vpa, ret);}long pSeries_lpar_hpte_insert(unsigned long hpte_group, unsigned long va, unsigned long pa, unsigned long rflags, unsigned long vflags, int psize){ unsigned long lpar_rc; unsigned long flags; unsigned long slot; unsigned long hpte_v, hpte_r; unsigned long dummy0, dummy1; if (!(vflags & HPTE_V_BOLTED)) DBG_LOW("hpte_insert(group=%lx, va=%016lx, pa=%016lx, " "rflags=%lx, vflags=%lx, psize=%d)\n", hpte_group, va, pa, rflags, vflags, psize); hpte_v = hpte_encode_v(va, psize) | vflags | HPTE_V_VALID; hpte_r = hpte_encode_r(pa, psize) | rflags; if (!(vflags & HPTE_V_BOLTED)) DBG_LOW(" hpte_v=%016lx, hpte_r=%016lx\n", hpte_v, hpte_r); /* Now fill in the actual HPTE */ /* Set CEC cookie to 0 */ /* Zero page = 0 */ /* I-cache Invalidate = 0 */ /* I-cache synchronize = 0 */ /* Exact = 0 */ flags = 0; /* Make pHyp happy */ if (rflags & (_PAGE_GUARDED|_PAGE_NO_CACHE)) hpte_r &= ~_PAGE_COHERENT; lpar_rc = plpar_hcall(H_ENTER, flags, hpte_group, hpte_v, hpte_r, &slot, &dummy0, &dummy1); if (unlikely(lpar_rc == H_PTEG_Full)) { if (!(vflags & HPTE_V_BOLTED)) DBG_LOW(" full\n"); return -1; } /* * Since we try and ioremap PHBs we don't own, the pte insert * will fail. However we must catch the failure in hash_page * or we will loop forever, so return -2 in this case. */ if (unlikely(lpar_rc != H_Success)) { if (!(vflags & HPTE_V_BOLTED)) DBG_LOW(" lpar err %d\n", lpar_rc); return -2; } if (!(vflags & HPTE_V_BOLTED)) DBG_LOW(" -> slot: %d\n", slot & 7); /* Because of iSeries, we have to pass down the secondary * bucket bit here as well */ return (slot & 7) | (!!(vflags & HPTE_V_SECONDARY) << 3);}static DEFINE_SPINLOCK(pSeries_lpar_tlbie_lock);static long pSeries_lpar_hpte_remove(unsigned long hpte_group){ unsigned long slot_offset; unsigned long lpar_rc; int i; unsigned long dummy1, dummy2; /* pick a random slot to start at */ slot_offset = mftb() & 0x7; for (i = 0; i < HPTES_PER_GROUP; i++) { /* don't remove a bolted entry */ lpar_rc = plpar_pte_remove(H_ANDCOND, hpte_group + slot_offset, (0x1UL << 4), &dummy1, &dummy2); if (lpar_rc == H_Success) return i; BUG_ON(lpar_rc != H_Not_Found); slot_offset++; slot_offset &= 0x7; } return -1;}static void pSeries_lpar_hptab_clear(void){ unsigned long size_bytes = 1UL << ppc64_pft_size; unsigned long hpte_count = size_bytes >> 4; unsigned long dummy1, dummy2; int i; /* TODO: Use bulk call */ for (i = 0; i < hpte_count; i++) plpar_pte_remove(0, i, 0, &dummy1, &dummy2);}/* * NOTE: for updatepp ops we are fortunate that the linux "newpp" bits and * the low 3 bits of flags happen to line up. So no transform is needed. * We can probably optimize here and assume the high bits of newpp are * already zero. For now I am paranoid. */static long pSeries_lpar_hpte_updatepp(unsigned long slot, unsigned long newpp, unsigned long va, int psize, int local){ unsigned long lpar_rc; unsigned long flags = (newpp & 7) | H_AVPN; unsigned long want_v; want_v = hpte_encode_v(va, psize); DBG_LOW(" update: avpnv=%016lx, hash=%016lx, f=%x, psize: %d ... ", want_v & HPTE_V_AVPN, slot, flags, psize); lpar_rc = plpar_pte_protect(flags, slot, want_v & HPTE_V_AVPN); if (lpar_rc == H_Not_Found) { DBG_LOW("not found !\n"); return -1; } DBG_LOW("ok\n"); BUG_ON(lpar_rc != H_Success); return 0;}static unsigned long pSeries_lpar_hpte_getword0(unsigned long slot){ unsigned long dword0; unsigned long lpar_rc; unsigned long dummy_word1; unsigned long flags; /* Read 1 pte at a time */ /* Do not need RPN to logical page translation */ /* No cross CEC PFT access */ flags = 0; lpar_rc = plpar_pte_read(flags, slot, &dword0, &dummy_word1); BUG_ON(lpar_rc != H_Success); return dword0;}static long pSeries_lpar_hpte_find(unsigned long va, int psize){ unsigned long hash; unsigned long i, j; long slot; unsigned long want_v, hpte_v; hash = hpt_hash(va, mmu_psize_defs[psize].shift); want_v = hpte_encode_v(va, psize); for (j = 0; j < 2; j++) { slot = (hash & htab_hash_mask) * HPTES_PER_GROUP; for (i = 0; i < HPTES_PER_GROUP; i++) { hpte_v = pSeries_lpar_hpte_getword0(slot); if (HPTE_V_COMPARE(hpte_v, want_v) && (hpte_v & HPTE_V_VALID) && (!!(hpte_v & HPTE_V_SECONDARY) == j)) { /* HPTE matches */ if (j) slot = -slot; return slot; } ++slot; } hash = ~hash; } return -1;} static void pSeries_lpar_hpte_updateboltedpp(unsigned long newpp, unsigned long ea, int psize){ unsigned long lpar_rc, slot, vsid, va, flags; vsid = get_kernel_vsid(ea); va = (vsid << 28) | (ea & 0x0fffffff); slot = pSeries_lpar_hpte_find(va, psize); BUG_ON(slot == -1); flags = newpp & 7; lpar_rc = plpar_pte_protect(flags, slot, 0); BUG_ON(lpar_rc != H_Success);}static void pSeries_lpar_hpte_invalidate(unsigned long slot, unsigned long va, int psize, int local){ unsigned long want_v; unsigned long lpar_rc; unsigned long dummy1, dummy2; DBG_LOW(" inval : slot=%lx, va=%016lx, psize: %d, local: %d", slot, va, psize, local); want_v = hpte_encode_v(va, psize); lpar_rc = plpar_pte_remove(H_AVPN, slot, want_v & HPTE_V_AVPN, &dummy1, &dummy2); if (lpar_rc == H_Not_Found) return; BUG_ON(lpar_rc != H_Success);}/* * Take a spinlock around flushes to avoid bouncing the hypervisor tlbie * lock. */void pSeries_lpar_flush_hash_range(unsigned long number, int local){ int i; unsigned long flags = 0; struct ppc64_tlb_batch *batch = &__get_cpu_var(ppc64_tlb_batch); int lock_tlbie = !cpu_has_feature(CPU_FTR_LOCKLESS_TLBIE); if (lock_tlbie) spin_lock_irqsave(&pSeries_lpar_tlbie_lock, flags); for (i = 0; i < number; i++) flush_hash_page(batch->vaddr[i], batch->pte[i], batch->psize, local); if (lock_tlbie) spin_unlock_irqrestore(&pSeries_lpar_tlbie_lock, flags);}void hpte_init_lpar(void){ ppc_md.hpte_invalidate = pSeries_lpar_hpte_invalidate; ppc_md.hpte_updatepp = pSeries_lpar_hpte_updatepp; ppc_md.hpte_updateboltedpp = pSeries_lpar_hpte_updateboltedpp; ppc_md.hpte_insert = pSeries_lpar_hpte_insert; ppc_md.hpte_remove = pSeries_lpar_hpte_remove; ppc_md.flush_hash_range = pSeries_lpar_flush_hash_range; ppc_md.hpte_clear_all = pSeries_lpar_hptab_clear; htab_finish_init();}
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -