⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 init_64.c

📁 linux-2.6.15.6
💻 C
字号:
/* *  PowerPC version *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) * *  Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au) *  and Cort Dougan (PReP) (cort@cs.nmt.edu) *    Copyright (C) 1996 Paul Mackerras *  Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk). * *  Derived from "arch/i386/mm/init.c" *    Copyright (C) 1991, 1992, 1993, 1994  Linus Torvalds * *  Dave Engebretsen <engebret@us.ibm.com> *      Rework for PPC64 port. * *  This program is free software; you can redistribute it and/or *  modify it under the terms of the GNU General Public License *  as published by the Free Software Foundation; either version *  2 of the License, or (at your option) any later version. * */#undef DEBUG#include <linux/config.h>#include <linux/signal.h>#include <linux/sched.h>#include <linux/kernel.h>#include <linux/errno.h>#include <linux/string.h>#include <linux/types.h>#include <linux/mman.h>#include <linux/mm.h>#include <linux/swap.h>#include <linux/stddef.h>#include <linux/vmalloc.h>#include <linux/init.h>#include <linux/delay.h>#include <linux/bootmem.h>#include <linux/highmem.h>#include <linux/idr.h>#include <linux/nodemask.h>#include <linux/module.h>#include <asm/pgalloc.h>#include <asm/page.h>#include <asm/prom.h>#include <asm/lmb.h>#include <asm/rtas.h>#include <asm/io.h>#include <asm/mmu_context.h>#include <asm/pgtable.h>#include <asm/mmu.h>#include <asm/uaccess.h>#include <asm/smp.h>#include <asm/machdep.h>#include <asm/tlb.h>#include <asm/eeh.h>#include <asm/processor.h>#include <asm/mmzone.h>#include <asm/cputable.h>#include <asm/sections.h>#include <asm/system.h>#include <asm/iommu.h>#include <asm/abs_addr.h>#include <asm/vdso.h>#include "mmu_decl.h"#ifdef DEBUG#define DBG(fmt...) printk(fmt)#else#define DBG(fmt...)#endif#if PGTABLE_RANGE > USER_VSID_RANGE#warning Limited user VSID range means pagetable space is wasted#endif#if (TASK_SIZE_USER64 < PGTABLE_RANGE) && (TASK_SIZE_USER64 < USER_VSID_RANGE)#warning TASK_SIZE is smaller than it needs to be.#endif/* max amount of RAM to use */unsigned long __max_memory;/* info on what we think the IO hole is */unsigned long 	io_hole_start;unsigned long	io_hole_size;/* * Do very early mm setup. */void __init mm_init_ppc64(void){#ifndef CONFIG_PPC_ISERIES	unsigned long i;#endif	ppc64_boot_msg(0x100, "MM Init");	/* This is the story of the IO hole... please, keep seated,	 * unfortunately, we are out of oxygen masks at the moment.	 * So we need some rough way to tell where your big IO hole	 * is. On pmac, it's between 2G and 4G, on POWER3, it's around	 * that area as well, on POWER4 we don't have one, etc...	 * We need that as a "hint" when sizing the TCE table on POWER3	 * So far, the simplest way that seem work well enough for us it	 * to just assume that the first discontinuity in our physical	 * RAM layout is the IO hole. That may not be correct in the future	 * (and isn't on iSeries but then we don't care ;)	 */#ifndef CONFIG_PPC_ISERIES	for (i = 1; i < lmb.memory.cnt; i++) {		unsigned long base, prevbase, prevsize;		prevbase = lmb.memory.region[i-1].base;		prevsize = lmb.memory.region[i-1].size;		base = lmb.memory.region[i].base;		if (base > (prevbase + prevsize)) {			io_hole_start = prevbase + prevsize;			io_hole_size = base  - (prevbase + prevsize);			break;		}	}#endif /* CONFIG_PPC_ISERIES */	if (io_hole_start)		printk("IO Hole assumed to be %lx -> %lx\n",		       io_hole_start, io_hole_start + io_hole_size - 1);	ppc64_boot_msg(0x100, "MM Init Done");}void free_initmem(void){	unsigned long addr;	addr = (unsigned long)__init_begin;	for (; addr < (unsigned long)__init_end; addr += PAGE_SIZE) {		memset((void *)addr, 0xcc, PAGE_SIZE);		ClearPageReserved(virt_to_page(addr));		set_page_count(virt_to_page(addr), 1);		free_page(addr);		totalram_pages++;	}	printk ("Freeing unused kernel memory: %luk freed\n",		((unsigned long)__init_end - (unsigned long)__init_begin) >> 10);}#ifdef CONFIG_BLK_DEV_INITRDvoid free_initrd_mem(unsigned long start, unsigned long end){	if (start < end)		printk ("Freeing initrd memory: %ldk freed\n", (end - start) >> 10);	for (; start < end; start += PAGE_SIZE) {		ClearPageReserved(virt_to_page(start));		set_page_count(virt_to_page(start), 1);		free_page(start);		totalram_pages++;	}}#endifstatic struct kcore_list kcore_vmem;static int __init setup_kcore(void){	int i;	for (i=0; i < lmb.memory.cnt; i++) {		unsigned long base, size;		struct kcore_list *kcore_mem;		base = lmb.memory.region[i].base;		size = lmb.memory.region[i].size;		/* GFP_ATOMIC to avoid might_sleep warnings during boot */		kcore_mem = kmalloc(sizeof(struct kcore_list), GFP_ATOMIC);		if (!kcore_mem)			panic("mem_init: kmalloc failed\n");		kclist_add(kcore_mem, __va(base), size);	}	kclist_add(&kcore_vmem, (void *)VMALLOC_START, VMALLOC_END-VMALLOC_START);	return 0;}module_init(setup_kcore);static void zero_ctor(void *addr, kmem_cache_t *cache, unsigned long flags){	memset(addr, 0, kmem_cache_size(cache));}#ifdef CONFIG_PPC_64K_PAGESstatic const unsigned int pgtable_cache_size[3] = {	PTE_TABLE_SIZE, PMD_TABLE_SIZE, PGD_TABLE_SIZE};static const char *pgtable_cache_name[ARRAY_SIZE(pgtable_cache_size)] = {	"pte_pmd_cache", "pmd_cache", "pgd_cache",};#elsestatic const unsigned int pgtable_cache_size[2] = {	PTE_TABLE_SIZE, PMD_TABLE_SIZE};static const char *pgtable_cache_name[ARRAY_SIZE(pgtable_cache_size)] = {	"pgd_pte_cache", "pud_pmd_cache",};#endif /* CONFIG_PPC_64K_PAGES */kmem_cache_t *pgtable_cache[ARRAY_SIZE(pgtable_cache_size)];void pgtable_cache_init(void){	int i;	for (i = 0; i < ARRAY_SIZE(pgtable_cache_size); i++) {		int size = pgtable_cache_size[i];		const char *name = pgtable_cache_name[i];		DBG("Allocating page table cache %s (#%d) "		    "for size: %08x...\n", name, i, size);		pgtable_cache[i] = kmem_cache_create(name,						     size, size,						     SLAB_HWCACHE_ALIGN |						     SLAB_MUST_HWCACHE_ALIGN,						     zero_ctor,						     NULL);		if (! pgtable_cache[i])			panic("pgtable_cache_init(): could not create %s!\n",			      name);	}}

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -