📄 time.c
字号:
/* * arch/arm/mach-pxa/time.c * * Author: Nicolas Pitre * Created: Jun 15, 2001 * Copyright: MontaVista Software Inc. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */#include <linux/config.h>#include <linux/kernel.h>#include <linux/init.h>#include <linux/delay.h>#include <linux/interrupt.h>#include <linux/time.h>#include <linux/signal.h>#include <linux/errno.h>#include <linux/sched.h>#include <asm/system.h>#include <asm/hardware.h>#include <asm/io.h>#include <asm/leds.h>#include <asm/irq.h>#include <asm/mach/irq.h>#include <asm/mach/time.h>#include <asm/arch/pxa-regs.h>static inline unsigned long pxa_get_rtc_time(void){ return RCNR;}static int pxa_set_rtc(void){ unsigned long current_time = xtime.tv_sec; if (RTSR & RTSR_ALE) { /* make sure not to forward the clock over an alarm */ unsigned long alarm = RTAR; if (current_time >= alarm && alarm >= RCNR) return -ERESTARTSYS; } RCNR = current_time; return 0;}/* IRQs are disabled before entering here from do_gettimeofday() */static unsigned long pxa_gettimeoffset (void){ long ticks_to_match, elapsed, usec; /* Get ticks before next timer match */ ticks_to_match = OSMR0 - OSCR; /* We need elapsed ticks since last match */ elapsed = LATCH - ticks_to_match; /* don't get fooled by the workaround in pxa_timer_interrupt() */ if (elapsed <= 0) return 0; /* Now convert them to usec */ usec = (unsigned long)(elapsed * (tick_nsec / 1000))/LATCH; return usec;}#ifdef CONFIG_NO_IDLE_HZstatic unsigned long initial_match;static int match_posponed;#endifstatic irqreturn_tpxa_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs){ int next_match; write_seqlock(&xtime_lock);#ifdef CONFIG_NO_IDLE_HZ if (match_posponed) { match_posponed = 0; OSMR0 = initial_match; }#endif /* Loop until we get ahead of the free running timer. * This ensures an exact clock tick count and time accuracy. * Since IRQs are disabled at this point, coherence between * lost_ticks(updated in do_timer()) and the match reg value is * ensured, hence we can use do_gettimeofday() from interrupt * handlers. * * HACK ALERT: it seems that the PXA timer regs aren't updated right * away in all cases when a write occurs. We therefore compare with * 8 instead of 0 in the while() condition below to avoid missing a * match if OSCR has already reached the next OSMR value. * Experience has shown that up to 6 ticks are needed to work around * this problem, but let's use 8 to be conservative. Note that this * affect things only when the timer IRQ has been delayed by nearly * exactly one tick period which should be a pretty rare event. */ do { timer_tick(regs); OSSR = OSSR_M0; /* Clear match on timer 0 */ next_match = (OSMR0 += LATCH); } while( (signed long)(next_match - OSCR) <= 8 ); write_sequnlock(&xtime_lock); return IRQ_HANDLED;}static struct irqaction pxa_timer_irq = { .name = "PXA Timer Tick", .flags = SA_INTERRUPT | SA_TIMER, .handler = pxa_timer_interrupt,};static void __init pxa_timer_init(void){ struct timespec tv; set_rtc = pxa_set_rtc; tv.tv_nsec = 0; tv.tv_sec = pxa_get_rtc_time(); do_settimeofday(&tv); OIER = 0; /* disable any timer interrupts */ OSCR = LATCH*2; /* push OSCR out of the way */ OSMR0 = LATCH; /* set initial match */ OSSR = 0xf; /* clear status on all timers */ setup_irq(IRQ_OST0, &pxa_timer_irq); OIER = OIER_E0; /* enable match on timer 0 to cause interrupts */ OSCR = 0; /* initialize free-running timer */}#ifdef CONFIG_NO_IDLE_HZstatic int pxa_dyn_tick_enable_disable(void){ /* nothing to do */ return 0;}static void pxa_dyn_tick_reprogram(unsigned long ticks){ if (ticks > 1) { initial_match = OSMR0; OSMR0 = initial_match + ticks * LATCH; match_posponed = 1; }}static irqreturn_tpxa_dyn_tick_handler(int irq, void *dev_id, struct pt_regs *regs){ if (match_posponed) { match_posponed = 0; OSMR0 = initial_match; if ( (signed long)(initial_match - OSCR) <= 8 ) return pxa_timer_interrupt(irq, dev_id, regs); } return IRQ_NONE;}static struct dyn_tick_timer pxa_dyn_tick = { .enable = pxa_dyn_tick_enable_disable, .disable = pxa_dyn_tick_enable_disable, .reprogram = pxa_dyn_tick_reprogram, .handler = pxa_dyn_tick_handler,};#endif#ifdef CONFIG_PMstatic unsigned long osmr[4], oier;static void pxa_timer_suspend(void){ osmr[0] = OSMR0; osmr[1] = OSMR1; osmr[2] = OSMR2; osmr[3] = OSMR3; oier = OIER;}static void pxa_timer_resume(void){ OSMR0 = osmr[0]; OSMR1 = osmr[1]; OSMR2 = osmr[2]; OSMR3 = osmr[3]; OIER = oier; /* * OSMR0 is the system timer: make sure OSCR is sufficiently behind */ OSCR = OSMR0 - LATCH;}#else#define pxa_timer_suspend NULL#define pxa_timer_resume NULL#endifstruct sys_timer pxa_timer = { .init = pxa_timer_init, .suspend = pxa_timer_suspend, .resume = pxa_timer_resume, .offset = pxa_gettimeoffset,#ifdef CONFIG_NO_IDLE_HZ .dyn_tick = &pxa_dyn_tick,#endif};
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -