⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 apm.c

📁 linux-2.6.15.6
💻 C
字号:
/* * bios-less APM driver for ARM Linux  *  Jamey Hicks <jamey@crl.dec.com> *  adapted from the APM BIOS driver for Linux by Stephen Rothwell (sfr@linuxcare.com) * * APM 1.2 Reference: *   Intel Corporation, Microsoft Corporation. Advanced Power Management *   (APM) BIOS Interface Specification, Revision 1.2, February 1996. * * [This document is available from Microsoft at: *    http://www.microsoft.com/hwdev/busbios/amp_12.htm] */#include <linux/config.h>#include <linux/module.h>#include <linux/poll.h>#include <linux/timer.h>#include <linux/slab.h>#include <linux/proc_fs.h>#include <linux/miscdevice.h>#include <linux/apm_bios.h>#include <linux/sched.h>#include <linux/pm.h>#include <linux/pm_legacy.h>#include <linux/device.h>#include <linux/kernel.h>#include <linux/list.h>#include <linux/init.h>#include <linux/completion.h>#include <asm/apm.h> /* apm_power_info */#include <asm/system.h>/* * The apm_bios device is one of the misc char devices. * This is its minor number. */#define APM_MINOR_DEV	134/* * See Documentation/Config.help for the configuration options. * * Various options can be changed at boot time as follows: * (We allow underscores for compatibility with the modules code) *	apm=on/off			enable/disable APM *//* * Maximum number of events stored */#define APM_MAX_EVENTS		16struct apm_queue {	unsigned int		event_head;	unsigned int		event_tail;	apm_event_t		events[APM_MAX_EVENTS];};/* * The per-file APM data */struct apm_user {	struct list_head	list;	unsigned int		suser: 1;	unsigned int		writer: 1;	unsigned int		reader: 1;	int			suspend_result;	unsigned int		suspend_state;#define SUSPEND_NONE	0		/* no suspend pending */#define SUSPEND_PENDING	1		/* suspend pending read */#define SUSPEND_READ	2		/* suspend read, pending ack */#define SUSPEND_ACKED	3		/* suspend acked */#define SUSPEND_DONE	4		/* suspend completed */	struct apm_queue	queue;};/* * Local variables */static int suspends_pending;static int apm_disabled;static DECLARE_WAIT_QUEUE_HEAD(apm_waitqueue);static DECLARE_WAIT_QUEUE_HEAD(apm_suspend_waitqueue);/* * This is a list of everyone who has opened /dev/apm_bios */static DECLARE_RWSEM(user_list_lock);static LIST_HEAD(apm_user_list);/* * kapmd info.  kapmd provides us a process context to handle * "APM" events within - specifically necessary if we're going * to be suspending the system. */static DECLARE_WAIT_QUEUE_HEAD(kapmd_wait);static DECLARE_COMPLETION(kapmd_exit);static DEFINE_SPINLOCK(kapmd_queue_lock);static struct apm_queue kapmd_queue;static const char driver_version[] = "1.13";	/* no spaces *//* * Compatibility cruft until the IPAQ people move over to the new * interface. */static void __apm_get_power_status(struct apm_power_info *info){}/* * This allows machines to provide their own "apm get power status" function. */void (*apm_get_power_status)(struct apm_power_info *) = __apm_get_power_status;EXPORT_SYMBOL(apm_get_power_status);/* * APM event queue management. */static inline int queue_empty(struct apm_queue *q){	return q->event_head == q->event_tail;}static inline apm_event_t queue_get_event(struct apm_queue *q){	q->event_tail = (q->event_tail + 1) % APM_MAX_EVENTS;	return q->events[q->event_tail];}static void queue_add_event(struct apm_queue *q, apm_event_t event){	q->event_head = (q->event_head + 1) % APM_MAX_EVENTS;	if (q->event_head == q->event_tail) {		static int notified;		if (notified++ == 0)		    printk(KERN_ERR "apm: an event queue overflowed\n");		q->event_tail = (q->event_tail + 1) % APM_MAX_EVENTS;	}	q->events[q->event_head] = event;}static void queue_event_one_user(struct apm_user *as, apm_event_t event){	if (as->suser && as->writer) {		switch (event) {		case APM_SYS_SUSPEND:		case APM_USER_SUSPEND:			/*			 * If this user already has a suspend pending,			 * don't queue another one.			 */			if (as->suspend_state != SUSPEND_NONE)				return;			as->suspend_state = SUSPEND_PENDING;			suspends_pending++;			break;		}	}	queue_add_event(&as->queue, event);}static void queue_event(apm_event_t event, struct apm_user *sender){	struct apm_user *as;	down_read(&user_list_lock);	list_for_each_entry(as, &apm_user_list, list) {		if (as != sender && as->reader)			queue_event_one_user(as, event);	}	up_read(&user_list_lock);	wake_up_interruptible(&apm_waitqueue);}static void apm_suspend(void){	struct apm_user *as;	int err = pm_suspend(PM_SUSPEND_MEM);	/*	 * Anyone on the APM queues will think we're still suspended.	 * Send a message so everyone knows we're now awake again.	 */	queue_event(APM_NORMAL_RESUME, NULL);	/*	 * Finally, wake up anyone who is sleeping on the suspend.	 */	down_read(&user_list_lock);	list_for_each_entry(as, &apm_user_list, list) {		as->suspend_result = err;		as->suspend_state = SUSPEND_DONE;	}	up_read(&user_list_lock);	wake_up(&apm_suspend_waitqueue);}static ssize_t apm_read(struct file *fp, char __user *buf, size_t count, loff_t *ppos){	struct apm_user *as = fp->private_data;	apm_event_t event;	int i = count, ret = 0;	if (count < sizeof(apm_event_t))		return -EINVAL;	if (queue_empty(&as->queue) && fp->f_flags & O_NONBLOCK)		return -EAGAIN;	wait_event_interruptible(apm_waitqueue, !queue_empty(&as->queue));	while ((i >= sizeof(event)) && !queue_empty(&as->queue)) {		event = queue_get_event(&as->queue);		ret = -EFAULT;		if (copy_to_user(buf, &event, sizeof(event)))			break;		if (event == APM_SYS_SUSPEND || event == APM_USER_SUSPEND)			as->suspend_state = SUSPEND_READ;		buf += sizeof(event);		i -= sizeof(event);	}	if (i < count)		ret = count - i;	return ret;}static unsigned int apm_poll(struct file *fp, poll_table * wait){	struct apm_user *as = fp->private_data;	poll_wait(fp, &apm_waitqueue, wait);	return queue_empty(&as->queue) ? 0 : POLLIN | POLLRDNORM;}/* * apm_ioctl - handle APM ioctl * * APM_IOC_SUSPEND *   This IOCTL is overloaded, and performs two functions.  It is used to: *     - initiate a suspend *     - acknowledge a suspend read from /dev/apm_bios. *   Only when everyone who has opened /dev/apm_bios with write permission *   has acknowledge does the actual suspend happen. */static intapm_ioctl(struct inode * inode, struct file *filp, u_int cmd, u_long arg){	struct apm_user *as = filp->private_data;	unsigned long flags;	int err = -EINVAL;	if (!as->suser || !as->writer)		return -EPERM;	switch (cmd) {	case APM_IOC_SUSPEND:		as->suspend_result = -EINTR;		if (as->suspend_state == SUSPEND_READ) {			/*			 * If we read a suspend command from /dev/apm_bios,			 * then the corresponding APM_IOC_SUSPEND ioctl is			 * interpreted as an acknowledge.			 */			as->suspend_state = SUSPEND_ACKED;			suspends_pending--;		} else {			/*			 * Otherwise it is a request to suspend the system.			 * Queue an event for all readers, and expect an			 * acknowledge from all writers who haven't already			 * acknowledged.			 */			queue_event(APM_USER_SUSPEND, as);		}		/*		 * If there are no further acknowledges required, suspend		 * the system.		 */		if (suspends_pending == 0)			apm_suspend();		/*		 * Wait for the suspend/resume to complete.  If there are		 * pending acknowledges, we wait here for them.		 *		 * Note that we need to ensure that the PM subsystem does		 * not kick us out of the wait when it suspends the threads.		 */		flags = current->flags;		current->flags |= PF_NOFREEZE;		/*		 * Note: do not allow a thread which is acking the suspend		 * to escape until the resume is complete.		 */		if (as->suspend_state == SUSPEND_ACKED)			wait_event(apm_suspend_waitqueue,					 as->suspend_state == SUSPEND_DONE);		else			wait_event_interruptible(apm_suspend_waitqueue,					 as->suspend_state == SUSPEND_DONE);		current->flags = flags;		err = as->suspend_result;		as->suspend_state = SUSPEND_NONE;		break;	}	return err;}static int apm_release(struct inode * inode, struct file * filp){	struct apm_user *as = filp->private_data;	filp->private_data = NULL;	down_write(&user_list_lock);	list_del(&as->list);	up_write(&user_list_lock);	/*	 * We are now unhooked from the chain.  As far as new	 * events are concerned, we no longer exist.  However, we	 * need to balance suspends_pending, which means the	 * possibility of sleeping.	 */	if (as->suspend_state != SUSPEND_NONE) {		suspends_pending -= 1;		if (suspends_pending == 0)			apm_suspend();	}	kfree(as);	return 0;}static int apm_open(struct inode * inode, struct file * filp){	struct apm_user *as;	as = (struct apm_user *)kmalloc(sizeof(*as), GFP_KERNEL);	if (as) {		memset(as, 0, sizeof(*as));		/*		 * XXX - this is a tiny bit broken, when we consider BSD		 * process accounting. If the device is opened by root, we		 * instantly flag that we used superuser privs. Who knows,		 * we might close the device immediately without doing a		 * privileged operation -- cevans		 */		as->suser = capable(CAP_SYS_ADMIN);		as->writer = (filp->f_mode & FMODE_WRITE) == FMODE_WRITE;		as->reader = (filp->f_mode & FMODE_READ) == FMODE_READ;		down_write(&user_list_lock);		list_add(&as->list, &apm_user_list);		up_write(&user_list_lock);		filp->private_data = as;	}	return as ? 0 : -ENOMEM;}static struct file_operations apm_bios_fops = {	.owner		= THIS_MODULE,	.read		= apm_read,	.poll		= apm_poll,	.ioctl		= apm_ioctl,	.open		= apm_open,	.release	= apm_release,};static struct miscdevice apm_device = {	.minor		= APM_MINOR_DEV,	.name		= "apm_bios",	.fops		= &apm_bios_fops};#ifdef CONFIG_PROC_FS/* * Arguments, with symbols from linux/apm_bios.h. * *   0) Linux driver version (this will change if format changes) *   1) APM BIOS Version.  Usually 1.0, 1.1 or 1.2. *   2) APM flags from APM Installation Check (0x00): *	bit 0: APM_16_BIT_SUPPORT *	bit 1: APM_32_BIT_SUPPORT *	bit 2: APM_IDLE_SLOWS_CLOCK *	bit 3: APM_BIOS_DISABLED *	bit 4: APM_BIOS_DISENGAGED *   3) AC line status *	0x00: Off-line *	0x01: On-line *	0x02: On backup power (BIOS >= 1.1 only) *	0xff: Unknown *   4) Battery status *	0x00: High *	0x01: Low *	0x02: Critical *	0x03: Charging *	0x04: Selected battery not present (BIOS >= 1.2 only) *	0xff: Unknown *   5) Battery flag *	bit 0: High *	bit 1: Low *	bit 2: Critical *	bit 3: Charging *	bit 7: No system battery *	0xff: Unknown *   6) Remaining battery life (percentage of charge): *	0-100: valid *	-1: Unknown *   7) Remaining battery life (time units): *	Number of remaining minutes or seconds *	-1: Unknown *   8) min = minutes; sec = seconds */static int apm_get_info(char *buf, char **start, off_t fpos, int length){	struct apm_power_info info;	char *units;	int ret;	info.ac_line_status = 0xff;	info.battery_status = 0xff;	info.battery_flag   = 0xff;	info.battery_life   = -1;	info.time	    = -1;	info.units	    = -1;	if (apm_get_power_status)		apm_get_power_status(&info);	switch (info.units) {	default:	units = "?";	break;	case 0: 	units = "min";	break;	case 1: 	units = "sec";	break;	}	ret = sprintf(buf, "%s 1.2 0x%02x 0x%02x 0x%02x 0x%02x %d%% %d %s\n",		     driver_version, APM_32_BIT_SUPPORT,		     info.ac_line_status, info.battery_status,		     info.battery_flag, info.battery_life,		     info.time, units); 	return ret;}#endifstatic int kapmd(void *arg){	daemonize("kapmd");	current->flags |= PF_NOFREEZE;	do {		apm_event_t event;		wait_event_interruptible(kapmd_wait,				!queue_empty(&kapmd_queue) || !pm_active);		if (!pm_active)			break;		spin_lock_irq(&kapmd_queue_lock);		event = 0;		if (!queue_empty(&kapmd_queue))			event = queue_get_event(&kapmd_queue);		spin_unlock_irq(&kapmd_queue_lock);		switch (event) {		case 0:			break;		case APM_LOW_BATTERY:		case APM_POWER_STATUS_CHANGE:			queue_event(event, NULL);			break;		case APM_USER_SUSPEND:		case APM_SYS_SUSPEND:			queue_event(event, NULL);			if (suspends_pending == 0)				apm_suspend();			break;		case APM_CRITICAL_SUSPEND:			apm_suspend();			break;		}	} while (1);	complete_and_exit(&kapmd_exit, 0);}static int __init apm_init(void){	int ret;	if (apm_disabled) {		printk(KERN_NOTICE "apm: disabled on user request.\n");		return -ENODEV;	}	if (PM_IS_ACTIVE()) {		printk(KERN_NOTICE "apm: overridden by ACPI.\n");		return -EINVAL;	}	pm_active = 1;	ret = kernel_thread(kapmd, NULL, CLONE_KERNEL);	if (ret < 0) {		pm_active = 0;		return ret;	}#ifdef CONFIG_PROC_FS	create_proc_info_entry("apm", 0, NULL, apm_get_info);#endif	ret = misc_register(&apm_device);	if (ret != 0) {		remove_proc_entry("apm", NULL);		pm_active = 0;		wake_up(&kapmd_wait);		wait_for_completion(&kapmd_exit);	}	return ret;}static void __exit apm_exit(void){	misc_deregister(&apm_device);	remove_proc_entry("apm", NULL);	pm_active = 0;	wake_up(&kapmd_wait);	wait_for_completion(&kapmd_exit);}module_init(apm_init);module_exit(apm_exit);MODULE_AUTHOR("Stephen Rothwell");MODULE_DESCRIPTION("Advanced Power Management");MODULE_LICENSE("GPL");#ifndef MODULEstatic int __init apm_setup(char *str){	while ((str != NULL) && (*str != '\0')) {		if (strncmp(str, "off", 3) == 0)			apm_disabled = 1;		if (strncmp(str, "on", 2) == 0)			apm_disabled = 0;		str = strchr(str, ',');		if (str != NULL)			str += strspn(str, ", \t");	}	return 1;}__setup("apm=", apm_setup);#endif/** * apm_queue_event - queue an APM event for kapmd * @event: APM event * * Queue an APM event for kapmd to process and ultimately take the * appropriate action.  Only a subset of events are handled: *   %APM_LOW_BATTERY *   %APM_POWER_STATUS_CHANGE *   %APM_USER_SUSPEND *   %APM_SYS_SUSPEND *   %APM_CRITICAL_SUSPEND */void apm_queue_event(apm_event_t event){	unsigned long flags;	spin_lock_irqsave(&kapmd_queue_lock, flags);	queue_add_event(&kapmd_queue, event);	spin_unlock_irqrestore(&kapmd_queue_lock, flags);	wake_up_interruptible(&kapmd_wait);}EXPORT_SYMBOL(apm_queue_event);

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -