⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 ioremap.c

📁 linux-2.6.15.6
💻 C
字号:
/* *  linux/arch/arm/mm/ioremap.c * * Re-map IO memory to kernel address space so that we can access it. * * (C) Copyright 1995 1996 Linus Torvalds * * Hacked for ARM by Phil Blundell <philb@gnu.org> * Hacked to allow all architectures to build, and various cleanups * by Russell King * * This allows a driver to remap an arbitrary region of bus memory into * virtual space.  One should *only* use readl, writel, memcpy_toio and * so on with such remapped areas. * * Because the ARM only has a 32-bit address space we can't address the * whole of the (physical) PCI space at once.  PCI huge-mode addressing * allows us to circumvent this restriction by splitting PCI space into * two 2GB chunks and mapping only one at a time into processor memory. * We use MMU protection domains to trap any attempt to access the bank * that is not currently mapped.  (This isn't fully implemented yet.) */#include <linux/module.h>#include <linux/errno.h>#include <linux/mm.h>#include <linux/vmalloc.h>#include <asm/cacheflush.h>#include <asm/hardware.h>#include <asm/io.h>#include <asm/tlbflush.h>static inline voidremap_area_pte(pte_t * pte, unsigned long address, unsigned long size,	       unsigned long phys_addr, pgprot_t pgprot){	unsigned long end;	address &= ~PMD_MASK;	end = address + size;	if (end > PMD_SIZE)		end = PMD_SIZE;	BUG_ON(address >= end);	do {		if (!pte_none(*pte))			goto bad;		set_pte(pte, pfn_pte(phys_addr >> PAGE_SHIFT, pgprot));		address += PAGE_SIZE;		phys_addr += PAGE_SIZE;		pte++;	} while (address && (address < end));	return; bad:	printk("remap_area_pte: page already exists\n");	BUG();}static inline intremap_area_pmd(pmd_t * pmd, unsigned long address, unsigned long size,	       unsigned long phys_addr, unsigned long flags){	unsigned long end;	pgprot_t pgprot;	address &= ~PGDIR_MASK;	end = address + size;	if (end > PGDIR_SIZE)		end = PGDIR_SIZE;	phys_addr -= address;	BUG_ON(address >= end);	pgprot = __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY | L_PTE_WRITE | flags);	do {		pte_t * pte = pte_alloc_kernel(pmd, address);		if (!pte)			return -ENOMEM;		remap_area_pte(pte, address, end - address, address + phys_addr, pgprot);		address = (address + PMD_SIZE) & PMD_MASK;		pmd++;	} while (address && (address < end));	return 0;}static intremap_area_pages(unsigned long start, unsigned long phys_addr,		 unsigned long size, unsigned long flags){	unsigned long address = start;	unsigned long end = start + size;	int err = 0;	pgd_t * dir;	phys_addr -= address;	dir = pgd_offset(&init_mm, address);	BUG_ON(address >= end);	do {		pmd_t *pmd = pmd_alloc(&init_mm, dir, address);		if (!pmd) {			err = -ENOMEM;			break;		}		if (remap_area_pmd(pmd, address, end - address,					 phys_addr + address, flags)) {			err = -ENOMEM;			break;		}		address = (address + PGDIR_SIZE) & PGDIR_MASK;		dir++;	} while (address && (address < end));	flush_cache_vmap(start, end);	return err;}/* * Remap an arbitrary physical address space into the kernel virtual * address space. Needed when the kernel wants to access high addresses * directly. * * NOTE! We need to allow non-page-aligned mappings too: we will obviously * have to convert them into an offset in a page-aligned mapping, but the * caller shouldn't need to know that small detail. * * 'flags' are the extra L_PTE_ flags that you want to specify for this * mapping.  See include/asm-arm/proc-armv/pgtable.h for more information. */void __iomem *__ioremap(unsigned long phys_addr, size_t size, unsigned long flags){	void * addr;	struct vm_struct * area;	unsigned long offset, last_addr;	/* Don't allow wraparound or zero size */	last_addr = phys_addr + size - 1;	if (!size || last_addr < phys_addr)		return NULL;	/*	 * Mappings have to be page-aligned	 */	offset = phys_addr & ~PAGE_MASK;	phys_addr &= PAGE_MASK;	size = PAGE_ALIGN(last_addr + 1) - phys_addr;	/*	 * Ok, go for it..	 */	area = get_vm_area(size, VM_IOREMAP);	if (!area)		return NULL;	addr = area->addr;	if (remap_area_pages((unsigned long) addr, phys_addr, size, flags)) {		vfree(addr);		return NULL;	}	return (void __iomem *) (offset + (char *)addr);}EXPORT_SYMBOL(__ioremap);void __iounmap(void __iomem *addr){	vfree((void *) (PAGE_MASK & (unsigned long) addr));}EXPORT_SYMBOL(__iounmap);#ifdef __iovoid __iomem *ioport_map(unsigned long port, unsigned int nr){	return __io(port);}EXPORT_SYMBOL(ioport_map);void ioport_unmap(void __iomem *addr){}EXPORT_SYMBOL(ioport_unmap);#endif#ifdef CONFIG_PCI#include <linux/pci.h>#include <linux/ioport.h>void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen){	unsigned long start = pci_resource_start(dev, bar);	unsigned long len   = pci_resource_len(dev, bar);	unsigned long flags = pci_resource_flags(dev, bar);	if (!len || !start)		return NULL;	if (maxlen && len > maxlen)		len = maxlen;	if (flags & IORESOURCE_IO)		return ioport_map(start, len);	if (flags & IORESOURCE_MEM) {		if (flags & IORESOURCE_CACHEABLE)			return ioremap(start, len);		return ioremap_nocache(start, len);	}	return NULL;}EXPORT_SYMBOL(pci_iomap);void pci_iounmap(struct pci_dev *dev, void __iomem *addr){	if ((unsigned long)addr >= VMALLOC_START &&	    (unsigned long)addr < VMALLOC_END)		iounmap(addr);}EXPORT_SYMBOL(pci_iounmap);#endif

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -