⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 timers.c

📁 linux-2.6.15.6
💻 C
字号:
/***************************************************************************//* *  linux/arch/m68knommu/platform/68328/timers.c * *  Copyright (C) 1993 Hamish Macdonald *  Copyright (C) 1999 D. Jeff Dionne *  Copyright (C) 2001 Georges Menie, Ken Desmet * * This file is subject to the terms and conditions of the GNU General Public * License.  See the file COPYING in the main directory of this archive * for more details. *//***************************************************************************/#include <linux/config.h>#include <linux/types.h>#include <linux/kernel.h>#include <linux/mm.h>#include <asm/setup.h>#include <asm/system.h>#include <asm/pgtable.h>#include <asm/irq.h>#include <asm/machdep.h>#include <asm/MC68VZ328.h>/***************************************************************************/#if defined(CONFIG_DRAGEN2)/* with a 33.16 MHz clock, this will give usec resolution to the time functions */#define CLOCK_SOURCE	TCTL_CLKSOURCE_SYSCLK#define CLOCK_PRE	7#define TICKS_PER_JIFFY	41450#elif defined(CONFIG_XCOPILOT_BUGS)/* * The only thing I know is that CLK32 is not available on Xcopilot * I have little idea about what frequency SYSCLK has on Xcopilot. * The values for prescaler and compare registers were simply * taken from the original source */#define CLOCK_SOURCE	TCTL_CLKSOURCE_SYSCLK#define CLOCK_PRE	2#define TICKS_PER_JIFFY	0xd7e4#else/* default to using the 32Khz clock */#define CLOCK_SOURCE	TCTL_CLKSOURCE_32KHZ#define CLOCK_PRE	31#define TICKS_PER_JIFFY	10#endif/***************************************************************************/void m68328_timer_init(irqreturn_t (*timer_routine) (int, void *, struct pt_regs *)){	/* disable timer 1 */	TCTL = 0;	/* set ISR */	if (request_irq(TMR_IRQ_NUM, timer_routine, IRQ_FLG_LOCK, "timer", NULL)) 		panic("Unable to attach timer interrupt\n");	/* Restart mode, Enable int, Set clock source */	TCTL = TCTL_OM | TCTL_IRQEN | CLOCK_SOURCE;	TPRER = CLOCK_PRE;	TCMP = TICKS_PER_JIFFY;	/* Enable timer 1 */	TCTL |= TCTL_TEN;}/***************************************************************************/void m68328_timer_tick(void){	/* Reset Timer1 */	TSTAT &= 0;}/***************************************************************************/unsigned long m68328_timer_gettimeoffset(void){	unsigned long ticks = TCN, offset = 0;	/* check for pending interrupt */	if (ticks < (TICKS_PER_JIFFY >> 1) && (ISR & (1 << TMR_IRQ_NUM)))		offset = 1000000 / HZ;	ticks = (ticks * 1000000 / HZ) / TICKS_PER_JIFFY;	return ticks + offset;}/***************************************************************************/void m68328_timer_gettod(int *year, int *mon, int *day, int *hour, int *min, int *sec){	long now = RTCTIME;	*year = *mon = *day = 1;	*hour = (now >> 24) % 24;	*min = (now >> 16) % 60;	*sec = now % 60;}/***************************************************************************/

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -