⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 pci-ip27.c

📁 linux-2.6.15.6
💻 C
字号:
/* * This file is subject to the terms and conditions of the GNU General Public * License.  See the file "COPYING" in the main directory of this archive * for more details. * * Copyright (C) 2003 Christoph Hellwig (hch@lst.de) * Copyright (C) 1999, 2000, 04 Ralf Baechle (ralf@linux-mips.org) * Copyright (C) 1999, 2000 Silicon Graphics, Inc. */#include <linux/init.h>#include <linux/kernel.h>#include <linux/pci.h>#include <asm/sn/arch.h>#include <asm/pci/bridge.h>#include <asm/paccess.h>#include <asm/sn/intr.h>#include <asm/sn/sn0/hub.h>extern unsigned int allocate_irqno(void);/* * Max #PCI busses we can handle; ie, max #PCI bridges. */#define MAX_PCI_BUSSES		40/* * Max #PCI devices (like scsi controllers) we handle on a bus. */#define MAX_DEVICES_PER_PCIBUS	8/* * XXX: No kmalloc available when we do our crosstalk scan, * 	we should try to move it later in the boot process. */static struct bridge_controller bridges[MAX_PCI_BUSSES];/* * Translate from irq to software PCI bus number and PCI slot. */struct bridge_controller *irq_to_bridge[MAX_PCI_BUSSES * MAX_DEVICES_PER_PCIBUS];int irq_to_slot[MAX_PCI_BUSSES * MAX_DEVICES_PER_PCIBUS];/* * The Bridge ASIC supports both type 0 and type 1 access.  Type 1 is * not really documented, so right now I can't write code which uses it. * Therefore we use type 0 accesses for now even though they won't work * correcly for PCI-to-PCI bridges. * * The function is complicated by the ultimate brokeness of the IOC3 chip * which is used in SGI systems.  The IOC3 can only handle 32-bit PCI * accesses and does only decode parts of it's address space. */static int pci_conf0_read_config(struct pci_bus *bus, unsigned int devfn,				 int where, int size, u32 * value){	struct bridge_controller *bc = BRIDGE_CONTROLLER(bus);	bridge_t *bridge = bc->base;	int slot = PCI_SLOT(devfn);	int fn = PCI_FUNC(devfn);	volatile void *addr;	u32 cf, shift, mask;	int res;	addr = &bridge->b_type0_cfg_dev[slot].f[fn].c[PCI_VENDOR_ID];	if (get_dbe(cf, (u32 *) addr))		return PCIBIOS_DEVICE_NOT_FOUND;	/*	 * IOC3 is fucked fucked beyond believe ...  Don't even give the	 * generic PCI code a chance to look at it for real ...	 */	if (cf == (PCI_VENDOR_ID_SGI | (PCI_DEVICE_ID_SGI_IOC3 << 16)))		goto oh_my_gawd;	addr = &bridge->b_type0_cfg_dev[slot].f[fn].c[where ^ (4 - size)];	if (size == 1)		res = get_dbe(*value, (u8 *) addr);	else if (size == 2)		res = get_dbe(*value, (u16 *) addr);	else		res = get_dbe(*value, (u32 *) addr);	return res ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;oh_my_gawd:	/*	 * IOC3 is fucked fucked beyond believe ...  Don't even give the	 * generic PCI code a chance to look at the wrong register.	 */	if ((where >= 0x14 && where < 0x40) || (where >= 0x48)) {		*value = 0;		return PCIBIOS_SUCCESSFUL;	}	/*	 * IOC3 is fucked fucked beyond believe ...  Don't try to access	 * anything but 32-bit words ...	 */	addr = &bridge->b_type0_cfg_dev[slot].f[fn].l[where >> 2];	if (get_dbe(cf, (u32 *) addr))		return PCIBIOS_DEVICE_NOT_FOUND;	shift = ((where & 3) << 3);	mask = (0xffffffffU >> ((4 - size) << 3));	*value = (cf >> shift) & mask;	return PCIBIOS_SUCCESSFUL;}static int pci_conf1_read_config(struct pci_bus *bus, unsigned int devfn,				 int where, int size, u32 * value){	struct bridge_controller *bc = BRIDGE_CONTROLLER(bus);	bridge_t *bridge = bc->base;	int busno = bus->number;	int slot = PCI_SLOT(devfn);	int fn = PCI_FUNC(devfn);	volatile void *addr;	u32 cf, shift, mask;	int res;	bridge->b_pci_cfg = (busno << 16) | (slot << 11);	addr = &bridge->b_type1_cfg.c[(fn << 8) | PCI_VENDOR_ID];	if (get_dbe(cf, (u32 *) addr))		return PCIBIOS_DEVICE_NOT_FOUND;	/*	 * IOC3 is fucked fucked beyond believe ...  Don't even give the	 * generic PCI code a chance to look at it for real ...	 */	if (cf == (PCI_VENDOR_ID_SGI | (PCI_DEVICE_ID_SGI_IOC3 << 16)))		goto oh_my_gawd;	bridge->b_pci_cfg = (busno << 16) | (slot << 11);	addr = &bridge->b_type1_cfg.c[(fn << 8) | (where ^ (4 - size))];	if (size == 1)		res = get_dbe(*value, (u8 *) addr);	else if (size == 2)		res = get_dbe(*value, (u16 *) addr);	else		res = get_dbe(*value, (u32 *) addr);	return res ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;oh_my_gawd:	/*	 * IOC3 is fucked fucked beyond believe ...  Don't even give the	 * generic PCI code a chance to look at the wrong register.	 */	if ((where >= 0x14 && where < 0x40) || (where >= 0x48)) {		*value = 0;		return PCIBIOS_SUCCESSFUL;	}	/*	 * IOC3 is fucked fucked beyond believe ...  Don't try to access	 * anything but 32-bit words ...	 */	bridge->b_pci_cfg = (busno << 16) | (slot << 11);	addr = &bridge->b_type1_cfg.c[(fn << 8) | where];	if (get_dbe(cf, (u32 *) addr))		return PCIBIOS_DEVICE_NOT_FOUND;	shift = ((where & 3) << 3);	mask = (0xffffffffU >> ((4 - size) << 3));	*value = (cf >> shift) & mask;	return PCIBIOS_SUCCESSFUL;}static int pci_read_config(struct pci_bus *bus, unsigned int devfn,			   int where, int size, u32 * value){	if (bus->number > 0)		return pci_conf1_read_config(bus, devfn, where, size, value);	return pci_conf0_read_config(bus, devfn, where, size, value);}static int pci_conf0_write_config(struct pci_bus *bus, unsigned int devfn,				  int where, int size, u32 value){	struct bridge_controller *bc = BRIDGE_CONTROLLER(bus);	bridge_t *bridge = bc->base;	int slot = PCI_SLOT(devfn);	int fn = PCI_FUNC(devfn);	volatile void *addr;	u32 cf, shift, mask, smask;	int res;	addr = &bridge->b_type0_cfg_dev[slot].f[fn].c[PCI_VENDOR_ID];	if (get_dbe(cf, (u32 *) addr))		return PCIBIOS_DEVICE_NOT_FOUND;	/*	 * IOC3 is fucked fucked beyond believe ...  Don't even give the	 * generic PCI code a chance to look at it for real ...	 */	if (cf == (PCI_VENDOR_ID_SGI | (PCI_DEVICE_ID_SGI_IOC3 << 16)))		goto oh_my_gawd;	addr = &bridge->b_type0_cfg_dev[slot].f[fn].c[where ^ (4 - size)];	if (size == 1) {		res = put_dbe(value, (u8 *) addr);	} else if (size == 2) {		res = put_dbe(value, (u16 *) addr);	} else {		res = put_dbe(value, (u32 *) addr);	}	if (res)		return PCIBIOS_DEVICE_NOT_FOUND;	return PCIBIOS_SUCCESSFUL;oh_my_gawd:	/*	 * IOC3 is fucked fucked beyond believe ...  Don't even give the	 * generic PCI code a chance to touch the wrong register.	 */	if ((where >= 0x14 && where < 0x40) || (where >= 0x48))		return PCIBIOS_SUCCESSFUL;	/*	 * IOC3 is fucked fucked beyond believe ...  Don't try to access	 * anything but 32-bit words ...	 */	addr = &bridge->b_type0_cfg_dev[slot].f[fn].l[where >> 2];	if (get_dbe(cf, (u32 *) addr))		return PCIBIOS_DEVICE_NOT_FOUND;	shift = ((where & 3) << 3);	mask = (0xffffffffU >> ((4 - size) << 3));	smask = mask << shift;	cf = (cf & ~smask) | ((value & mask) << shift);	if (put_dbe(cf, (u32 *) addr))		return PCIBIOS_DEVICE_NOT_FOUND;	return PCIBIOS_SUCCESSFUL;}static int pci_conf1_write_config(struct pci_bus *bus, unsigned int devfn,				  int where, int size, u32 value){	struct bridge_controller *bc = BRIDGE_CONTROLLER(bus);	bridge_t *bridge = bc->base;	int slot = PCI_SLOT(devfn);	int fn = PCI_FUNC(devfn);	int busno = bus->number;	volatile void *addr;	u32 cf, shift, mask, smask;	int res;	bridge->b_pci_cfg = (busno << 16) | (slot << 11);	addr = &bridge->b_type1_cfg.c[(fn << 8) | PCI_VENDOR_ID];	if (get_dbe(cf, (u32 *) addr))		return PCIBIOS_DEVICE_NOT_FOUND;	/*	 * IOC3 is fucked fucked beyond believe ...  Don't even give the	 * generic PCI code a chance to look at it for real ...	 */	if (cf == (PCI_VENDOR_ID_SGI | (PCI_DEVICE_ID_SGI_IOC3 << 16)))		goto oh_my_gawd;	addr = &bridge->b_type1_cfg.c[(fn << 8) | (where ^ (4 - size))];	if (size == 1) {		res = put_dbe(value, (u8 *) addr);	} else if (size == 2) {		res = put_dbe(value, (u16 *) addr);	} else {		res = put_dbe(value, (u32 *) addr);	}	if (res)		return PCIBIOS_DEVICE_NOT_FOUND;	return PCIBIOS_SUCCESSFUL;oh_my_gawd:	/*	 * IOC3 is fucked fucked beyond believe ...  Don't even give the	 * generic PCI code a chance to touch the wrong register.	 */	if ((where >= 0x14 && where < 0x40) || (where >= 0x48))		return PCIBIOS_SUCCESSFUL;	/*	 * IOC3 is fucked fucked beyond believe ...  Don't try to access	 * anything but 32-bit words ...	 */	addr = &bridge->b_type0_cfg_dev[slot].f[fn].l[where >> 2];	if (get_dbe(cf, (u32 *) addr))		return PCIBIOS_DEVICE_NOT_FOUND;	shift = ((where & 3) << 3);	mask = (0xffffffffU >> ((4 - size) << 3));	smask = mask << shift;	cf = (cf & ~smask) | ((value & mask) << shift);	if (put_dbe(cf, (u32 *) addr))		return PCIBIOS_DEVICE_NOT_FOUND;	return PCIBIOS_SUCCESSFUL;}static int pci_write_config(struct pci_bus *bus, unsigned int devfn,	int where, int size, u32 value){	if (bus->number > 0)		return pci_conf1_write_config(bus, devfn, where, size, value);	return pci_conf0_write_config(bus, devfn, where, size, value);}static struct pci_ops bridge_pci_ops = {	.read = pci_read_config,	.write = pci_write_config,};int __init bridge_probe(nasid_t nasid, int widget_id, int masterwid){	unsigned long offset = NODE_OFFSET(nasid);	struct bridge_controller *bc;	static int num_bridges = 0;	bridge_t *bridge;	int slot;	printk("a bridge\n");	/* XXX: kludge alert.. */	if (!num_bridges)		ioport_resource.end = ~0UL;	bc = &bridges[num_bridges];	bc->pc.pci_ops		= &bridge_pci_ops;	bc->pc.mem_resource	= &bc->mem;	bc->pc.io_resource	= &bc->io;	bc->pc.index		= num_bridges;	bc->mem.name		= "Bridge PCI MEM";	bc->pc.mem_offset	= offset;	bc->mem.start		= 0;	bc->mem.end		= ~0UL;	bc->mem.flags		= IORESOURCE_MEM;	bc->io.name		= "Bridge IO MEM";	bc->pc.io_offset	= offset;	bc->io.start		= 0UL;	bc->io.end		= ~0UL;	bc->io.flags		= IORESOURCE_IO;	bc->irq_cpu = smp_processor_id();	bc->widget_id = widget_id;	bc->nasid = nasid;	bc->baddr = (u64)masterwid << 60;	bc->baddr |= (1UL << 56);	/* Barrier set */	/*	 * point to this bridge	 */	bridge = (bridge_t *) RAW_NODE_SWIN_BASE(nasid, widget_id);	/* 	 * Clear all pending interrupts. 	 */	bridge->b_int_rst_stat = BRIDGE_IRR_ALL_CLR;	/* 	 * Until otherwise set up, assume all interrupts are from slot 0 	 */	bridge->b_int_device = 0x0;	/* 	 * swap pio's to pci mem and io space (big windows) 	 */	bridge->b_wid_control |= BRIDGE_CTRL_IO_SWAP |	                         BRIDGE_CTRL_MEM_SWAP;	/*	 * Hmm...  IRIX sets additional bits in the address which	 * are documented as reserved in the bridge docs.	 */	bridge->b_wid_int_upper = 0x8000 | (masterwid << 16);	bridge->b_wid_int_lower = 0x01800090;	/* PI_INT_PEND_MOD off*/	bridge->b_dir_map = (masterwid << 20);	/* DMA */	bridge->b_int_enable = 0;	for (slot = 0; slot < 8; slot ++) {		bridge->b_device[slot].reg |= BRIDGE_DEV_SWAP_DIR;		bc->pci_int[slot] = -1;	}	bridge->b_wid_tflush;     /* wait until Bridge PIO complete */	bc->base = bridge;	register_pci_controller(&bc->pc);	num_bridges++;	return 0;}/* * All observed requests have pin == 1. We could have a global here, that * gets incremented and returned every time - unfortunately, pci_map_irq * may be called on the same device over and over, and need to return the * same value. On O2000, pin can be 0 or 1, and PCI slots can be [0..7]. * * A given PCI device, in general, should be able to intr any of the cpus * on any one of the hubs connected to its xbow. */int __devinit pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin){	struct bridge_controller *bc = BRIDGE_CONTROLLER(dev->bus);	int irq = bc->pci_int[slot];	if (irq == -1) {		irq = bc->pci_int[slot] = request_bridge_irq(bc);		if (irq < 0)			panic("Can't allocate interrupt for PCI device %s\n",			      pci_name(dev));	}	irq_to_bridge[irq] = bc;	irq_to_slot[irq] = slot;	return irq;}/* Do platform specific device initialization at pci_enable_device() time */int pcibios_plat_dev_init(struct pci_dev *dev){	return 0;}/* * Device might live on a subordinate PCI bus.  XXX Walk up the chain of buses * to find the slot number in sense of the bridge device register. * XXX This also means multiple devices might rely on conflicting bridge * settings. */static inline void pci_disable_swapping(struct pci_dev *dev){	struct bridge_controller *bc = BRIDGE_CONTROLLER(dev->bus);	bridge_t *bridge = bc->base;	int slot = PCI_SLOT(dev->devfn);	/* Turn off byte swapping */	bridge->b_device[slot].reg &= ~BRIDGE_DEV_SWAP_DIR;	bridge->b_widget.w_tflush;	/* Flush */}static inline void pci_enable_swapping(struct pci_dev *dev){	struct bridge_controller *bc = BRIDGE_CONTROLLER(dev->bus);	bridge_t *bridge = bc->base;	int slot = PCI_SLOT(dev->devfn);	/* Turn on byte swapping */	bridge->b_device[slot].reg |= BRIDGE_DEV_SWAP_DIR;	bridge->b_widget.w_tflush;	/* Flush */}static void __init pci_fixup_ioc3(struct pci_dev *d){	pci_disable_swapping(d);}int pcibus_to_node(struct pci_bus *bus){	struct bridge_controller *bc = BRIDGE_CONTROLLER(bus);	return bc->nasid;}DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC3,	pci_fixup_ioc3);

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -