⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 rtc.c

📁 linux-2.6.15.6
💻 C
字号:
/* * linux/arch/sh/kernel/rtc.c -- SH3 / SH4 on-chip RTC support * *  Copyright (C) 2000  Philipp Rumpf <prumpf@tux.org> *  Copyright (C) 1999  Tetsuya Okada & Niibe Yutaka */#include <linux/init.h>#include <linux/kernel.h>#include <linux/sched.h>#include <linux/time.h>#include <asm/io.h>#include <asm/rtc.h>#ifndef BCD_TO_BIN#define BCD_TO_BIN(val) ((val)=((val)&15) + ((val)>>4)*10)#endif#ifndef BIN_TO_BCD#define BIN_TO_BCD(val) ((val)=(((val)/10)<<4) + (val)%10)#endifvoid sh_rtc_gettimeofday(struct timespec *ts){	unsigned int sec128, sec, sec2, min, hr, wk, day, mon, yr, yr100, cf_bit;	unsigned long flags; again:	do {		local_irq_save(flags);		ctrl_outb(0, RCR1);  /* Clear CF-bit */		sec128 = ctrl_inb(R64CNT);		sec = ctrl_inb(RSECCNT);		min = ctrl_inb(RMINCNT);		hr  = ctrl_inb(RHRCNT);		wk  = ctrl_inb(RWKCNT);		day = ctrl_inb(RDAYCNT);		mon = ctrl_inb(RMONCNT);#if defined(CONFIG_CPU_SH4)		yr  = ctrl_inw(RYRCNT);		yr100 = (yr >> 8);		yr &= 0xff;#else		yr  = ctrl_inb(RYRCNT);		yr100 = (yr == 0x99) ? 0x19 : 0x20;#endif		sec2 = ctrl_inb(R64CNT);		cf_bit = ctrl_inb(RCR1) & RCR1_CF;		local_irq_restore(flags);	} while (cf_bit != 0 || ((sec128 ^ sec2) & RTC_BIT_INVERTED) != 0);	BCD_TO_BIN(yr100);	BCD_TO_BIN(yr);	BCD_TO_BIN(mon);	BCD_TO_BIN(day);	BCD_TO_BIN(hr);	BCD_TO_BIN(min);	BCD_TO_BIN(sec);	if (yr > 99 || mon < 1 || mon > 12 || day > 31 || day < 1 ||	    hr > 23 || min > 59 || sec > 59) {		printk(KERN_ERR		       "SH RTC: invalid value, resetting to 1 Jan 2000\n");		local_irq_save(flags);		ctrl_outb(RCR2_RESET, RCR2);  /* Reset & Stop */		ctrl_outb(0, RSECCNT);		ctrl_outb(0, RMINCNT);		ctrl_outb(0, RHRCNT);		ctrl_outb(6, RWKCNT);		ctrl_outb(1, RDAYCNT);		ctrl_outb(1, RMONCNT);#if defined(CONFIG_CPU_SH4)		ctrl_outw(0x2000, RYRCNT);#else		ctrl_outb(0, RYRCNT);#endif		ctrl_outb(RCR2_RTCEN|RCR2_START, RCR2);  /* Start */		goto again;	}#if RTC_BIT_INVERTED != 0	if ((sec128 & RTC_BIT_INVERTED))		sec--;#endif	ts->tv_sec = mktime(yr100 * 100 + yr, mon, day, hr, min, sec);	ts->tv_nsec = ((sec128 * 1000000) / 128) * 1000;}/* * Changed to only care about tv_sec, and not the full timespec struct * (i.e. tv_nsec).  It can easily be switched to timespec for future cpus * that support setting usec or nsec RTC values. */int sh_rtc_settimeofday(const time_t secs){	int retval = 0;	int real_seconds, real_minutes, cmos_minutes;	unsigned long flags;	local_irq_save(flags);	ctrl_outb(RCR2_RESET, RCR2);  /* Reset pre-scaler & stop RTC */	cmos_minutes = ctrl_inb(RMINCNT);	BCD_TO_BIN(cmos_minutes);	/*	 * since we're only adjusting minutes and seconds,	 * don't interfere with hour overflow. This avoids	 * messing with unknown time zones but requires your	 * RTC not to be off by more than 15 minutes	 */	real_seconds = secs % 60;	real_minutes = secs / 60;	if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1)		real_minutes += 30;	/* correct for half hour time zone */	real_minutes %= 60;	if (abs(real_minutes - cmos_minutes) < 30) {		BIN_TO_BCD(real_seconds);		BIN_TO_BCD(real_minutes);		ctrl_outb(real_seconds, RSECCNT);		ctrl_outb(real_minutes, RMINCNT);	} else {		printk(KERN_WARNING		       "set_rtc_time: can't update from %d to %d\n",		       cmos_minutes, real_minutes);		retval = -1;	}	ctrl_outb(RCR2_RTCEN|RCR2_START, RCR2);  /* Start RTC */	local_irq_restore(flags);	return retval;}

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -