configure

MIDI解码程序(用VC编写)

ac_env_target_alias_set=${target_alias+set}
ac_env_target_alias_value=$target_alias
ac_cv_env_target_alias_set=${target_alias+set}
ac_cv_env_target_alias_value=$target_alias
ac_env_CC_set=${CC+set}
ac_env_CC_value=$CC
ac_cv_env_CC_set=${CC+set}
ac_cv_env_CC_value=$CC
ac_env_CFLAGS_set=${CFLAGS+set}
ac_env_CFLAGS_value=$CFLAGS
ac_cv_env_CFLAGS_set=${CFLAGS+set}
ac_cv_env_CFLAGS_value=$CFLAGS
ac_env_LDFLAGS_set=${LDFLAGS+set}
ac_env_LDFLAGS_value=$LDFLAGS
ac_cv_env_LDFLAGS_set=${LDFLAGS+set}
ac_cv_env_LDFLAGS_value=$LDFLAGS
ac_env_CPPFLAGS_set=${CPPFLAGS+set}
ac_env_CPPFLAGS_value=$CPPFLAGS
ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set}
ac_cv_env_CPPFLAGS_value=$CPPFLAGS
ac_env_CPP_set=${CPP+set}
ac_env_CPP_value=$CPP
ac_cv_env_CPP_set=${CPP+set}
ac_cv_env_CPP_value=$CPP

#
# Report the --help message.
#
if test "$ac_init_help" = "long"; then
  # Omit some internal or obsolete options to make the list less imposing.
  # This message is too long to be a string in the A/UX 3.1 sh.
  cat <<_ACEOF
\`configure' configures TiMidity++ 2.13.2 to adapt to many kinds of systems.

Usage: $0 [OPTION]... [VAR=VALUE]...

To assign environment variables (e.g., CC, CFLAGS...), specify them as
VAR=VALUE.  See below for descriptions of some of the useful variables.

Defaults for the options are specified in brackets.

Configuration:
  -h, --help              display this help and exit
      --help=short        display options specific to this package
      --help=recursive    display the short help of all the included packages
  -V, --version           display version information and exit
  -q, --quiet, --silent   do not print \`checking...' messages
      --cache-file=FILE   cache test results in FILE [disabled]
  -C, --config-cache      alias for \`--cache-file=config.cache'
  -n, --no-create         do not create output files
      --srcdir=DIR        find the sources in DIR [configure dir or \`..']

_ACEOF

  cat <<_ACEOF
Installation directories:
  --prefix=PREFIX         install architecture-independent files in PREFIX
			  [$ac_default_prefix]
  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
			  [PREFIX]

By default, \`make install' will install all the files in
\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc.  You can specify
an installation prefix other than \`$ac_default_prefix' using \`--prefix',
for instance \`--prefix=\$HOME'.

For better control, use the options below.

Fine tuning of the installation directories:
  --bindir=DIR           user executables [EPREFIX/bin]
  --sbindir=DIR          system admin executables [EPREFIX/sbin]
  --libexecdir=DIR       program executables [EPREFIX/libexec]
  --datadir=DIR          read-only architecture-independent data [PREFIX/share]
  --sysconfdir=DIR       read-only single-machine data [PREFIX/etc]
  --sharedstatedir=DIR   modifiable architecture-independent data [PREFIX/com]
  --localstatedir=DIR    modifiable single-machine data [PREFIX/var]
  --libdir=DIR           object code libraries [EPREFIX/lib]
  --includedir=DIR       C header files [PREFIX/include]
  --oldincludedir=DIR    C header files for non-gcc [/usr/include]
  --infodir=DIR          info documentation [PREFIX/info]
  --mandir=DIR           man documentation [PREFIX/man]
_ACEOF

  cat <<\_ACEOF

Program names:
  --program-prefix=PREFIX            prepend PREFIX to installed program names
  --program-suffix=SUFFIX            append SUFFIX to installed program names
  --program-transform-name=PROGRAM   run sed PROGRAM on installed program names

X features:
  --x-includes=DIR    X include files are in DIR
  --x-libraries=DIR   X library files are in DIR

System types:
  --build=BUILD     configure for building on BUILD [guessed]
  --host=HOST       cross-compile to build programs to run on HOST [BUILD]
  --target=TARGET   configure for building compilers for TARGET [HOST]
_ACEOF
fi

if test -n "$ac_init_help"; then
  case $ac_init_help in
     short | recursive ) echo "Configuration of TiMidity++ 2.13.2:";;
   esac
  cat <<\_ACEOF

Optional Features:
  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
  --enable-maintainer-mode enable make rules and dependencies not useful
                          (and sometimes confusing) to the casual installer
  --enable-debug          Build a debugging version.
  --disable-dependency-tracking Speeds up one-time builds
  --enable-dependency-tracking  Do not reject slow dependency extractors
  --enable-audio=mode_list Enable audio (Specify comma separated mode list):
                              default:   Automatically select audio device.
                              oss:       OSS /dev/dsp
                              sun:       SunOS /dev/audio
                              hpux:      HPUX /dev/audio
                              irix:      IRIX audio library
                              mme:       OSF/1 MME
                              sb_dsp:    BSD/OS 2.0 /dev/sb_dsp
                              w32:       Windows MMS
                              darwin:    Darwin CoreAudio
                              alsa:      ALSA pcm device
                              alib:      HPUX network audio (Alib)
                              nas:       NAS - Network Audio System
                              arts:      aRts
                              esd:       EsounD - Enlightened Sound Daemon
                              portaudio: PortAudio
                              jack:      JACK
                              ao:        Libao
                              vorbis:    Ogg Vorbis
                              flac:      FLAC / OggFLAC
                              speex:     Ogg Speex
                              gogo:      MP3 GOGO (Only Windows is supported)
  --disable-alsatest      Do not try to compile and run a test Alsa program
  --disable-artstest       Do not try to compile and run a test ARTS program
  --disable-esdtest       Do not try to compile and run a test ESD program
  --disable-aotest       Do not try to compile and run a test ao program
  --disable-oggtest       Do not try to compile and run a test Ogg program
  --disable-vorbistest       Do not try to compile and run a test Vorbis program
  --disable-libFLACtest       Do not try to compile and run a test libFLAC program
  --disable-libOggFLACtest       Do not try to compile and run a test libOggFLAC program
  --enable-interface=interface_list
                          Comma separated interface list
  --enable-dynamic        Enable dynamic link interface   (default is no)
  --enable-dynamic=dynamic_list
                          Comma separated dynamic interface list
  --enable-ncurses        Enable ncurses interface        (default is no)
  --enable-slang          Enable slang interface          (default is no)
  --enable-motif          Enable motif interface          (default is no)
  --enable-tcltk          Enable tcltk interface          (default is no)
  --enable-emacs          Enable emacs interface          (default is no)
  --enable-vt100          Enable VT100 interface          (default is no)
  --enable-xaw            Enable athena interface         (default is no)
  --enable-xskin          Enable X skin interface         (default is no)
  --enable-gtk            Enable GTK+ interface           (default is no)
  --disable-gtktest       do not try to compile and run a test GTK+ program
  --disable-gtktest       Do not try to compile and run a test GTK program
  --enable-server         Enable server interface         (default is no)
  --enable-alsaseq        Enable ALSA sequencer server interface
                                                          (default is no)
  --enable-winsyn        Enable Windows Synthesizer interface
                                                          (default is no)
  --enable-portmidisyn        Enable PortMIDI Synthesizer interface
                                                          (default is no)
  --enable-winsyng        Enable Windows GUI Synthesizer interface
                                                          (default is no)
  --enable-w32gui         Enable Windows GUI interface    (default is no)
  --enable-ump            UMP configuration               (default is no)
  --enable-offix          Enable offix support            (default is no)
  --enable-network        Enable network support          (default is no)
  --enable-spectrogram    Enable Sound Spectrogram Viewer (default is no)
  --enable-spline=method  Specify spline method.
                                  one of no,linear,cubic,lagrange,newton,gauss
                                                          (default is linear)
  --enable-wrd            Enable WRD interface for X      (default is no)

Optional Packages:
  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
  --with-includes=DIR     Specify include directories (colon separated)
  --with-libraries=DIR    Specify library directories (colon separated)
  --with-default-path=DIR Where timidity.cfg is  (PREFIX/share/timidity)
  --with-module-dir=DIR   Where to install interfaces (PREFIX/lib/timidity)
  --with-lispdir          Override the default lisp directory
  --with-elf              create ELF shared object instead of AOUT
  --with-x                use the X Window System
  --with-tcl-includes=DIR Tcl include file path
  --with-tcl-libs=DIR     Tcl library file path
  --with-tk-includes=DIR  Tk include file path
  --with-tk-libs=DIR      Tk library file path
  --with-offix-includes=DIR Offix include file path
  --with-offix-libs=DIR   Offix include file path
  --with-nas-library=library NAS absolute library path(Don't use -laudio)
  --with-nas-includes=DIR NAS include files are in dir
  --with-default-output=<mode>  Specify default output mode (optional):
                                (default|alsa|alib|arts|nas|
                                esd|wav|au|aiff|list|vorbis|flac|speex|
                                gogo|portaudio|jack|ao)
  --with-alsa-prefix=PFX  Prefix where Alsa library is installed(optional)
  --with-alsa-inc-prefix=PFX  Prefix where include libraries are (optional)
  --with-arts-prefix=PFX   Prefix where ARTS is installed (optional)
  --with-esd-prefix=PFX   Prefix where ESD is installed (optional)
  --with-esd-exec-prefix=PFX Exec prefix where ESD is installed (optional)
  --with-ao=PFX   Prefix where libao is installed (optional)
  --with-ao-libraries=DIR   Directory where libao library is installed (optional)
  --with-ao-includes=DIR   Directory where libao header files are installed (optional)
  --with-ogg=PFX   Prefix where libogg is installed (optional)
  --with-ogg-libraries=DIR   Directory where libogg library is installed (optional)
  --with-ogg-includes=DIR   Directory where libogg header files are installed (optional)
  --with-vorbis=PFX   Prefix where libvorbis is installed (optional)
  --with-vorbis-libraries=DIR   Directory where libvorbis library is installed (optional)
  --with-vorbis-includes=DIR   Directory where libvorbis header files are installed (optional)
  --with-libFLAC=PFX   Prefix where libFLAC is installed (optional)
  --with-libFLAC-libraries=DIR   Directory where libFLAC library is installed (optional)
  --with-libFLAC-includes=DIR   Directory where libFLAC header files are installed (optional)
  --with-libOggFLAC=PFX   Prefix where libOggFLAC is installed (optional)
  --with-libOggFLAC-libraries=DIR   Directory where libOggFLAC library is installed (optional)
  --with-libOggFLAC-includes=DIR   Directory where libOggFLAC header files are installed (optional)
  --with-gtk-prefix=PFX   Prefix where GTK is installed (optional)
  --with-gtk-exec-prefix=PFX Exec prefix where GTK is installed (optional)

Some influential environment variables:
  CC          C compiler command
  CFLAGS      C compiler flags
  LDFLAGS     linker flags, e.g. -L<lib dir> if you have libraries in a
              nonstandard directory <lib dir>
  CPPFLAGS    C/C++ preprocessor flags, e.g. -I<include dir> if you have
              headers in a nonstandard directory <include dir>
  CPP         C preprocessor

Use these variables to override the choices made by `configure' or to help
it to find libraries and programs with nonstandard names/locations.

Report bugs to <[e-mail]>.
_ACEOF
fi

if test "$ac_init_help" = "recursive"; then
  # If there are subdirs, report their specific --help.
  ac_popdir=`pwd`
  for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
    test -d $ac_dir || continue
    ac_builddir=.

if test "$ac_dir" != .; then
  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
  # A "../" for each directory in $ac_dir_suffix.
  ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
else
  ac_dir_suffix= ac_top_builddir=
fi

case $srcdir in
  .)  # No --srcdir option.  We are building in place.
    ac_srcdir=.
    if test -z "$ac_top_builddir"; then
       ac_top_srcdir=.
    else
       ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
    fi ;;
  [\\/]* | ?:[\\/]* )  # Absolute path.
    ac_srcdir=$srcdir$ac_dir_suffix;
    ac_top_srcdir=$srcdir ;;
  *) # Relative path.
    ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
    ac_top_srcdir=$ac_top_builddir$srcdir ;;
esac

# Do not use `cd foo && pwd` to compute absolute paths, because
# the directories may not exist.
case `pwd` in
.) ac_abs_builddir="$ac_dir";;
*)
  case "$ac_dir" in
  .) ac_abs_builddir=`pwd`;;
  [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
  *) ac_abs_builddir=`pwd`/"$ac_dir";;
  esac;;
esac
case $ac_abs_builddir in
.) ac_abs_top_builddir=${ac_top_builddir}.;;
*)
  case ${ac_top_builddir}. in
  .) ac_abs_top_builddir=$ac_abs_builddir;;
  [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
  *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
  esac;;
esac
case $ac_abs_builddir in
.) ac_abs_srcdir=$ac_srcdir;;
*)
  case $ac_srcdir in
  .) ac_abs_srcdir=$ac_abs_builddir;;
  [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
  *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
  esac;;
esac
case $ac_abs_builddir in
.) ac_abs_top_srcdir=$ac_top_srcdir;;
*)
  case $ac_top_srcdir in
  .) ac_abs_top_srcdir=$ac_abs_builddir;;
  [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
  *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
  esac;;
esac

    cd $ac_dir
    # Check for guested configure; otherwise get Cygnus style configure.
    if test -f $ac_srcdir/configure.gnu; then
      echo
      $SHELL $ac_srcdir/configure.gnu  --help=recursive
    elif test -f $ac_srcdir/configure; then
      echo
      $SHELL $ac_srcdir/configure  --help=recursive
    elif test -f $ac_srcdir/configure.ac ||
	   test -f $ac_srcdir/configure.in; then
      echo
      $ac_configure --help
    else
      echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
    fi
    cd $ac_popdir
  done
fi

test -n "$ac_init_help" && exit 0
if $ac_init_version; then
  cat <<\_ACEOF
TiMidity++ configure 2.13.2
generated by GNU Autoconf 2.59

Copyright (C) 2003 Free Software Foundation, Inc.
This configure script is free software; the Free Software Foundation
gives unlimited permission to copy, distribute and modify it.
_ACEOF
  exit 0
fi
exec 5>config.log
cat >&5 <<_ACEOF
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.

It was created by TiMidity++ $as_me 2.13.2, which was
generated by GNU Autoconf 2.59.  Invocation command line was

  $ $0 $@

_ACEOF
{
cat <<_ASUNAME
## --------- ##
## Platform. ##
## --------- ##

hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
uname -m = `(uname -m) 2>/dev/null || echo unknown`
uname -r = `(uname -r) 2>/dev/null || echo unknown`
uname -s = `(uname -s) 2>/dev/null || echo unknown`
uname -v = `(uname -v) 2>/dev/null || echo unknown`

/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
/bin/uname -X     = `(/bin/uname -X) 2>/dev/null     || echo unknown`

/bin/arch              = `(/bin/arch) 2>/dev/null              || echo unknown`
/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null       || echo unknown`
/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
hostinfo               = `(hostinfo) 2>/dev/null               || echo unknown`
/bin/machine           = `(/bin/machine) 2>/dev/null           || echo unknown`
/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null       || echo unknown`
/bin/universe          = `(/bin/universe) 2>/dev/null          || echo unknown`