bitswap.s

编译后直接运行的ＭＰ３播放器全部Ｃ语言源代码 一个包含FAT文件系统、系统引导 Boot、FLASH Driver等内容的

/***************************************************************************
 *             __________               __   ___.
 *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
 *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
 *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
 *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
 *                     \/            \/     \/    \/            \/
 * $Id: bitswap.S,v 1.5 2004/03/03 07:18:26 hohensoh Exp $
 *
 * Copyright (C) 2002 by Magnus Holmgren
 *
 * All files in this archive are subject to the GNU General Public License.
 * See the file COPYING in the source tree root for full license agreement.
 *
 * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
 * KIND, either express or implied.
 *
 ****************************************************************************/

    .section    .icode,"ax",@progbits
    .align      2
    .global     _bitswap
    .type       _bitswap,@function

/* Registers used:
 *
 * r0   Temporary (required by some instructions)
 * r1   Low byte
 * r2   High byte / final result
 * r4   &Data
 * r5   Length
 * r7   Flip table
 */

/* The instruction order below is a bit strange, because:
 * 1) Keeping load/stores on longword boundaries means the instruction fetch
 *    won't compete with the memory access (because instructions are fetched
 *    in pairs).
 * 2) Using the result of a fetch in the next instruction causes a stall
 *    (except in certain circumstances).
 * See the SH-1 programming manual for details.
 */

_bitswap:
    mov.l   .fliptable,r7
    add     #-2,r4          /* ptr is used shifted by 2 */
    add     r4,r5           /* r5 = end_address - 2 */
    add     #-1,r5          /* r5 = &last_byte - 2 */
    mov     r4,r0
    tst     #1,r0           /* even address? */
    bt      .init           /* yes */

    add     #1,r4           /* r4 now even */
    mov.b   @(1,r4),r0      /* no, swap first byte */
    extu.b  r0,r0
    mov.b   @(r0,r7),r0
    mov.b   r0,@(1,r4)

.init:
    cmp/hi  r4,r5           /* at least 2 bytes to swap? */
    bf      .last           /* no, skip main loop */

.loop:
    mov.w   @(2,r4),r0      /* data to flip */
    add     #2,r4           /* early increment */
    swap.b  r0,r2           /* get high byte */
    extu.b  r0,r0           /* prepare low byte */
    mov.b   @(r0,r7),r1     /* swap low byte */
    extu.b  r2,r0           /* prepare high byte */
    mov.b   @(r0,r7),r2     /* swap high byte */
    extu.b  r1,r1           /* zero extend low byte */
    shll8   r2              /* shift high byte, low byte zeroed */
    or      r1,r2           /* put low byte in result */
    mov.w   r2,@r4          /* store result, ptr already incr'd */
    cmp/hi  r4,r5           /* while &last_byte > data */
    bt      .loop

.last:
    cmp/eq  r4,r5           /* if behind (&last_byte - 2), exit */
    bf      .exit

    mov.b   @(2,r4),r0      /* swap last byte */
    extu.b  r0,r0
    mov.b   @(r0,r7),r0
    mov.b   r0,@(2,r4)

.exit:
    rts
    nop

    .align  2

.fliptable:
    .long   _fliptable

_fliptable:
    .byte   0x00, 0x80, 0x40, 0xc0, 0x20, 0xa0, 0x60, 0xe0
    .byte   0x10, 0x90, 0x50, 0xd0, 0x30, 0xb0, 0x70, 0xf0
    .byte   0x08, 0x88, 0x48, 0xc8, 0x28, 0xa8, 0x68, 0xe8
    .byte   0x18, 0x98, 0x58, 0xd8, 0x38, 0xb8, 0x78, 0xf8
    .byte   0x04, 0x84, 0x44, 0xc4, 0x24, 0xa4, 0x64, 0xe4
    .byte   0x14, 0x94, 0x54, 0xd4, 0x34, 0xb4, 0x74, 0xf4
    .byte   0x0c, 0x8c, 0x4c, 0xcc, 0x2c, 0xac, 0x6c, 0xec
    .byte   0x1c, 0x9c, 0x5c, 0xdc, 0x3c, 0xbc, 0x7c, 0xfc
    .byte   0x02, 0x82, 0x42, 0xc2, 0x22, 0xa2, 0x62, 0xe2
    .byte   0x12, 0x92, 0x52, 0xd2, 0x32, 0xb2, 0x72, 0xf2
    .byte   0x0a, 0x8a, 0x4a, 0xca, 0x2a, 0xaa, 0x6a, 0xea
    .byte   0x1a, 0x9a, 0x5a, 0xda, 0x3a, 0xba, 0x7a, 0xfa
    .byte   0x06, 0x86, 0x46, 0xc6, 0x26, 0xa6, 0x66, 0xe6
    .byte   0x16, 0x96, 0x56, 0xd6, 0x36, 0xb6, 0x76, 0xf6
    .byte   0x0e, 0x8e, 0x4e, 0xce, 0x2e, 0xae, 0x6e, 0xee
    .byte   0x1e, 0x9e, 0x5e, 0xde, 0x3e, 0xbe, 0x7e, 0xfe
    .byte   0x01, 0x81, 0x41, 0xc1, 0x21, 0xa1, 0x61, 0xe1
    .byte   0x11, 0x91, 0x51, 0xd1, 0x31, 0xb1, 0x71, 0xf1
    .byte   0x09, 0x89, 0x49, 0xc9, 0x29, 0xa9, 0x69, 0xe9
    .byte   0x19, 0x99, 0x59, 0xd9, 0x39, 0xb9, 0x79, 0xf9
    .byte   0x05, 0x85, 0x45, 0xc5, 0x25, 0xa5, 0x65, 0xe5
    .byte   0x15, 0x95, 0x55, 0xd5, 0x35, 0xb5, 0x75, 0xf5
    .byte   0x0d, 0x8d, 0x4d, 0xcd, 0x2d, 0xad, 0x6d, 0xed
    .byte   0x1d, 0x9d, 0x5d, 0xdd, 0x3d, 0xbd, 0x7d, 0xfd
    .byte   0x03, 0x83, 0x43, 0xc3, 0x23, 0xa3, 0x63, 0xe3
    .byte   0x13, 0x93, 0x53, 0xd3, 0x33, 0xb3, 0x73, 0xf3
    .byte   0x0b, 0x8b, 0x4b, 0xcb, 0x2b, 0xab, 0x6b, 0xeb
    .byte   0x1b, 0x9b, 0x5b, 0xdb, 0x3b, 0xbb, 0x7b, 0xfb
    .byte   0x07, 0x87, 0x47, 0xc7, 0x27, 0xa7, 0x67, 0xe7
    .byte   0x17, 0x97, 0x57, 0xd7, 0x37, 0xb7, 0x77, 0xf7
    .byte   0x0f, 0x8f, 0x4f, 0xcf, 0x2f, 0xaf, 0x6f, 0xef
    .byte   0x1f, 0x9f, 0x5f, 0xdf, 0x3f, 0xbf, 0x7f, 0xff

.end:
    .size   _bitswap,.end-_bitswap