mipsregs.h

AT91RM9200的完整启动代码：包括loader, boot及U-boot三部分均已编译通过！欢迎下载使用！

/*
 * This file is subject to the terms and conditions of the GNU General Public
 * License.  See the file "COPYING" in the main directory of this archive
 * for more details.
 *
 * Copyright (C) 1994, 1995, 1996, 1997, 2000, 2001 by Ralf Baechle
 * Copyright (C) 2000 Silicon Graphics, Inc.
 * Modified for further R[236]000 support by Paul M. Antoine, 1996.
 * Kevin D. Kissell, [e-mail] and Carsten Langgaard, [e-mail]
 * Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
 */
#ifndef _ASM_MIPSREGS_H
#define _ASM_MIPSREGS_H

#if 0
#include <linux/linkage.h>
#endif

/*
 * The following macros are especially useful for __asm__
 * inline assembler.
 */
#ifndef __STR
#define __STR(x) #x
#endif
#ifndef STR
#define STR(x) __STR(x)
#endif

/*
 * Coprocessor 0 register names
 */
#define CP0_INDEX $0
#define CP0_RANDOM $1
#define CP0_ENTRYLO0 $2
#define CP0_ENTRYLO1 $3
#define CP0_CONF $3
#define CP0_CONTEXT $4
#define CP0_PAGEMASK $5
#define CP0_WIRED $6
#define CP0_INFO $7
#define CP0_BADVADDR $8
#define CP0_COUNT $9
#define CP0_ENTRYHI $10
#define CP0_COMPARE $11
#define CP0_STATUS $12
#define CP0_CAUSE $13
#define CP0_EPC $14
#define CP0_PRID $15
#define CP0_CONFIG $16
#define CP0_LLADDR $17
#define CP0_WATCHLO $18
#define CP0_WATCHHI $19
#define CP0_XCONTEXT $20
#define CP0_FRAMEMASK $21
#define CP0_DIAGNOSTIC $22
#define CP0_PERFORMANCE $25
#define CP0_ECC $26
#define CP0_CACHEERR $27
#define CP0_TAGLO $28
#define CP0_TAGHI $29
#define CP0_ERROREPC $30

/*
 * R4640/R4650 cp0 register names.  These registers are listed
 * here only for completeness; without MMU these CPUs are not useable
 * by Linux.  A future ELKS port might take make Linux run on them
 * though ...
 */
#define CP0_IBASE $0
#define CP0_IBOUND $1
#define CP0_DBASE $2
#define CP0_DBOUND $3
#define CP0_CALG $17
#define CP0_IWATCH $18
#define CP0_DWATCH $19

/* 
 * Coprocessor 0 Set 1 register names
 */
#define CP0_S1_DERRADDR0  $26
#define CP0_S1_DERRADDR1  $27
#define CP0_S1_INTCONTROL $20
/*
 * Coprocessor 1 (FPU) register names
 */
#define CP1_REVISION   $0
#define CP1_STATUS     $31

/*
 * FPU Status Register Values
 */
/*
 * Status Register Values
 */

#define FPU_CSR_FLUSH   0x01000000      /* flush denormalised results to 0 */
#define FPU_CSR_COND    0x00800000      /* $fcc0 */
#define FPU_CSR_COND0   0x00800000      /* $fcc0 */
#define FPU_CSR_COND1   0x02000000      /* $fcc1 */
#define FPU_CSR_COND2   0x04000000      /* $fcc2 */
#define FPU_CSR_COND3   0x08000000      /* $fcc3 */
#define FPU_CSR_COND4   0x10000000      /* $fcc4 */
#define FPU_CSR_COND5   0x20000000      /* $fcc5 */
#define FPU_CSR_COND6   0x40000000      /* $fcc6 */
#define FPU_CSR_COND7   0x80000000      /* $fcc7 */

/*
 * X the exception cause indicator
 * E the exception enable
 * S the sticky/flag bit
*/
#define FPU_CSR_ALL_X 0x0003f000
#define FPU_CSR_UNI_X   0x00020000
#define FPU_CSR_INV_X   0x00010000
#define FPU_CSR_DIV_X   0x00008000
#define FPU_CSR_OVF_X   0x00004000
#define FPU_CSR_UDF_X   0x00002000
#define FPU_CSR_INE_X   0x00001000

#define FPU_CSR_ALL_E   0x00000f80
#define FPU_CSR_INV_E   0x00000800
#define FPU_CSR_DIV_E   0x00000400
#define FPU_CSR_OVF_E   0x00000200
#define FPU_CSR_UDF_E   0x00000100
#define FPU_CSR_INE_E   0x00000080

#define FPU_CSR_ALL_S   0x0000007c
#define FPU_CSR_INV_S   0x00000040
#define FPU_CSR_DIV_S   0x00000020
#define FPU_CSR_OVF_S   0x00000010
#define FPU_CSR_UDF_S   0x00000008
#define FPU_CSR_INE_S   0x00000004

/* rounding mode */
#define FPU_CSR_RN      0x0     /* nearest */
#define FPU_CSR_RZ      0x1     /* towards zero */
#define FPU_CSR_RU      0x2     /* towards +Infinity */
#define FPU_CSR_RD      0x3     /* towards -Infinity */


/*
 * Values for PageMask register
 */
#include <linux/config.h>
#ifdef CONFIG_CPU_VR41XX
#define PM_1K   0x00000000
#define PM_4K   0x00001800
#define PM_16K  0x00007800
#define PM_64K  0x0001f800
#define PM_256K 0x0007f800
#else
#define PM_4K   0x00000000
#define PM_16K  0x00006000
#define PM_64K  0x0001e000
#define PM_256K 0x0007e000
#define PM_1M   0x001fe000
#define PM_4M   0x007fe000
#define PM_16M  0x01ffe000
#endif

/*
 * Values used for computation of new tlb entries
 */
#define PL_4K   12
#define PL_16K  14
#define PL_64K  16
#define PL_256K 18
#define PL_1M   20
#define PL_4M   22
#define PL_16M  24

/*
 * Macros to access the system control coprocessor
 */
#define read_32bit_cp0_register(source)                         \
({ int __res;                                                   \
        __asm__ __volatile__(                                   \
	".set\tpush\n\t"					\
	".set\treorder\n\t"					\
        "mfc0\t%0,"STR(source)"\n\t"                            \
	".set\tpop"						\
        : "=r" (__res));                                        \
        __res;})

#define read_32bit_cp0_set1_register(source)                    \
({ int __res;                                                   \
        __asm__ __volatile__(                                   \
	".set\tpush\n\t"					\
	".set\treorder\n\t"					\
        "cfc0\t%0,"STR(source)"\n\t"                            \
	".set\tpop"						\
        : "=r" (__res));                                        \
        __res;})

/*
 * For now use this only with interrupts disabled!
 */
#define read_64bit_cp0_register(source)                         \
({ int __res;                                                   \
        __asm__ __volatile__(                                   \
        ".set\tmips3\n\t"                                       \
        "dmfc0\t%0,"STR(source)"\n\t"                           \
        ".set\tmips0"                                           \
        : "=r" (__res));                                        \
        __res;})

#define write_32bit_cp0_register(register,value)                \
        __asm__ __volatile__(                                   \
        "mtc0\t%0,"STR(register)"\n\t"				\
	"nop"							\
        : : "r" (value));

#define write_32bit_cp0_set1_register(register,value)           \
        __asm__ __volatile__(                                   \
        "ctc0\t%0,"STR(register)"\n\t"				\
	"nop"							\
        : : "r" (value));

#define write_64bit_cp0_register(register,value)                \
        __asm__ __volatile__(                                   \
        ".set\tmips3\n\t"                                       \
        "dmtc0\t%0,"STR(register)"\n\t"                         \
        ".set\tmips0"                                           \
        : : "r" (value))

/* 
 * This should be changed when we get a compiler that support the MIPS32 ISA. 
 */
#define read_mips32_cp0_config1()                               \
({ int __res;                                                   \
        __asm__ __volatile__(                                   \
	".set\tnoreorder\n\t"                                   \
	".set\tnoat\n\t"                                        \
     	".word\t0x40018001\n\t"                                 \
	"move\t%0,$1\n\t"                                       \
	".set\tat\n\t"                                          \
	".set\treorder"                                         \
	:"=r" (__res));                                         \
        __res;})

/*
 * R4x00 interrupt enable / cause bits
 */
#define IE_SW0          (1<< 8)
#define IE_SW1          (1<< 9)
#define IE_IRQ0         (1<<10)
#define IE_IRQ1         (1<<11)
#define IE_IRQ2         (1<<12)
#define IE_IRQ3         (1<<13)
#define IE_IRQ4         (1<<14)
#define IE_IRQ5         (1<<15)

/*
 * R4x00 interrupt cause bits
 */
#define C_SW0           (1<< 8)
#define C_SW1           (1<< 9)
#define C_IRQ0          (1<<10)
#define C_IRQ1          (1<<11)
#define C_IRQ2          (1<<12)
#define C_IRQ3          (1<<13)
#define C_IRQ4          (1<<14)
#define C_IRQ5          (1<<15)

#ifndef _LANGUAGE_ASSEMBLY
/*
 * Manipulate the status register.
 * Mostly used to access the interrupt bits.
 */
#define __BUILD_SET_CP0(name,register)                          \