timeclock.drc

一个Delphi写的跟考勤机门禁机收款机的接品软件源码

	SysConst_SAccessViolationNoArg,	"Access violation"
	SysConst_SStackOverflow,	"Stack overflow"
	SysConst_SControlC,	"Control-C hit"
	SysConst_SPrivilege,	"Privileged instruction"
	SysConst_SOperationAborted,	"Operation aborted"
	SysConst_SException,	"Exception %s in module %s at %p.\r\n%s%s\r\n"
	SysConst_SExceptTitle,	"Application Error"
	SysConst_SInvalidFormat,	"Format '%s' invalid or incompatible with argument"
	SysConst_SArgumentMissing,	"No argument for format '%s'"
	SysConst_SDispatchError,	"Variant method calls not supported"
	SysConst_SReadAccess,	"Read"
	SysConst_SWriteAccess,	"Write"
	SysConst_SVarArrayCreate,	"Error creating variant or safe array"
	SysConst_SVarArrayBounds,	"Variant or safe array index out of bounds"
	SysConst_SVarArrayLocked,	"Variant or safe array is locked"
	SysConst_SFileNotFound,	"File not found"
	SysConst_SInvalidFilename,	"Invalid filename"
	SysConst_STooManyOpenFiles,	"Too many open files"
	SysConst_SAccessDenied,	"File access denied"
	SysConst_SEndOfFile,	"Read beyond end of file"
	SysConst_SDiskFull,	"Disk full"
	SysConst_SInvalidInput,	"Invalid numeric input"
	SysConst_SDivByZero,	"Division by zero"
	SysConst_SRangeError,	"Range check error"
	SysConst_SIntOverflow,	"Integer overflow"
	SysConst_SInvalidOp,	"Invalid floating point operation"
	SysConst_SZeroDivide,	"Floating point division by zero"
	SysConst_SOverflow,	"Floating point overflow"
	SysConst_SUnderflow,	"Floating point underflow"
	SysConst_SInvalidPointer,	"Invalid pointer operation"
	SysConst_SInvalidCast,	"Invalid class typecast"
	PrjConst_msg_set_price_list_fail,	"设置菜单价格表错误."
	PrjConst_msg_set_price_list_ok,	"设置菜单价格表成功完成."
	PrjConst_msg_list_total,	"总卡数 %d 个"
	PrjConst_msg_find_list_items,	"共找到 %d 个项目."
	PrjConst_msg_over_money_limit,	"金额不能超过 %g."
	PrjConst_msg_please_enter_charge_money,	"请输入补贴金额"
	PrjConst_msg_error_quit,	"出错中断"
	SysConst_SInvalidInteger,	"'%s' is not a valid integer value"
	SysConst_SInvalidFloat,	"'%s' is not a valid floating point value"
	SysConst_SInvalidDate,	"'%s' is not a valid date"
	SysConst_SInvalidTime,	"'%s' is not a valid time"
	SysConst_SInvalidDateTime,	"'%s' is not a valid date and time"
	SysConst_STimeEncodeError,	"Invalid argument to time encode"
	SysConst_SDateEncodeError,	"Invalid argument to date encode"
	SysConst_SOutOfMemory,	"Out of memory"
	SysConst_SInOutError,	"I/O error %d"
	PrjConst_msg_error,	"错误"
	PrjConst_SERROR,	"错误"
	PrjConst_SOK,	"成功"
	PrjConst_MflSectors,	"数据区 2,3,A,B 页\r\n数值区4, 5 页\r\n"
	PrjConst_Mf1Sectors,	"第 %u 扇区, 第 %u 块"
	PrjConst_SOAAUAeYOOOGCOOGG,	"超级用户密码超过3个, 只有前3个有效."
	PrjConst_SOAAA,	"用户编号"
	PrjConst_SRealControling,	"%s - 正在监控中"
	PrjConst_SSCOMDISSEGUGI,	"COM%d-%.2x(无法识别机型)"
	PrjConst_msg_save_list_file_ok,	"保存列表文件成功"
	PrjConst_msg_load_list_file_ok,	"读取列表文件成功"
	PrjConst_msg_request_read_devicelist,	"读取设备名单需要花费很长时间, 确定要读取设备名单吗?"
	PrjConst_msg_value_over_limit,	"金额不能超过 %g 元"
	PrjConst_msg_times_over_limit,	"参数不能大于 %d"
	PrjConst_msg_input_caption,	"输入"
	PrjConst_msg_price_prompt,	"请输入新单价(单位:元): "
	PrjConst_SOOEOAOAUOiAe,	"自由打卡间隔不能大於2.25秒"
	PrjConst_SECNEYNOGACUEI,	"是否删除选中的考勤时段?"
	PrjConst_SOAaEAGEeIeE,	"打铃时间写入完成."
	PrjConst_SCaYOAaEAIIo,	"清除打铃时间错误"
	PrjConst_SCUEIGEeIeE,	"考勤时段写入完成."
	PrjConst_SEeOAEIiCUIIo,	"设置全天考勤错误"
	PrjConst_SOyOUAEEeOA,	"正在读取设置..."
	PrjConst_SAOeEU,	"读卡分组失败."
	PrjConst_SAEuOGEeOAE,	"读所有设置成功."
	PrjConst_SECNEYNOGAOAaEA,	"是否删除选中的打铃时间?"
	PrjConst_SOEOUEeOIEEAONIO,	"由于设备出错, 实时监控已经停止"
	PrjConst_SIuI,	"消息"
	PrjConst_msg_information,	"提示"
	PrjConst_msg_infor,	"提示"
	PrjConst_msg_confirm,	"请确认"
	PrjConst_msg_warning,	"警告"
	PrjConst_SHGEMOSAe,	"h\"小时\"m\"分\"s\"秒\""
	PrjConst_SOEGGAEEeOAEU,	"运行模式设置失败."
	PrjConst_SIUAeEeOAEU,	"客户代码设置失败."
	PrjConst_SAAEEeOAEU,	"开门超时报警设置失败."
	PrjConst_SAEEeOAEU,	"卡号长度设置失败."
	PrjConst_SOOEEAOEeOAEU,	"自由刷卡间隔设置失败."
	PrjConst_SOEAOEeOAEU,	"重复刷卡间隔设置失败."
	PrjConst_SEIiCUEeOAEU,	"全天考勤设置失败."
	PrjConst_SCaYOAaEAEU,	"清除打铃时间失败."
	PrjConst_SEeOAOOeEGOUIOAEU,	"设置打卡分组识别字节位置失败."
	PrjConst_SOOeIEyEeOAEU,	"打卡分组参数设置失败."
	PrjConst_SCEOIEAEeOAEU,	"电锁闭合时间设置失败."
	PrjConst_RightCaption,	"设置正常指示灯时间失败"
	PrjConst_ErrorCaption,	"设置错误指示灯时间失败"
	PrjConst_SUAEEeOAE,	"机器设置成功."
	PrjConst_SGoAGAS,	"序 列 号:%s"
	PrjConst_SAEAaOAIASE,	"读取配置文件成功"
	PrjConst_SEEA,	"开始时间"
	PrjConst_SEA,	"时间"
	PrjConst_SUEOEOAEU,	"假日日期"
	PrjConst_SUGAAaOAIASE,	"更新配置文件成功"
	PrjConst_SAaAIEaEeAAUAeOOACeOGAEaEe,	"你两次输入的密码不一致, 请重新输入. "
	PrjConst_SAUAeOOEUEAuOAEEyOAFAF,	"密码只接受十六进制数字, A-F, a-f, 0-9"
	PrjConst_SCeEaEeA,	"请输入卡号. "
	PrjConst_SCeEaEeAAAUAe,	"请输入开门密码. "
	PrjConst_SEANEOyENEIHhMmO,	"时间格式不正确, 格式为hh:mm, 从00:00 到 24:00."
	PrjConst_SOGEAAUIAa,	"持续时间不能为零"
	PrjConst_SOyOUIAOOA,	"正在下载字库..."
	PrjConst_SCeIOO,	"请停止打卡"
	PrjConst_SOyOUIAOUDOOA,	"正在下载第 %d 页字库..."
	PrjConst_SIAOOIaEU,	"下载字体失败!"
	PrjConst_SIAOIeEDOOAOAES,	"下载完成%d页字库, 用时%s."
	PrjConst_SGSSAEe,	"修改设备"
	PrjConst_SCaYEyYOAUOAaEOCaYSSEeOGEuOGAEEyYAg,	"清除数据后将不能恢复 !!! \r\n你确定要清除 \"COM%d-%.2x\" 设备中所有的刷卡数据吗?"
	PrjConst_SCaYEyYIeE,	"清除数据完成."
	PrjConst_SCaYEyYEU,	"清除数据失败."
	PrjConst_SOyOUAOCOMDS,	"正在联接\"COM%d\"-\"%s\""
	PrjConst_SOAUOAOUERIuNU,	"只能用于 ER-680 消费机"
	PrjConst_SIuNUGIUEyIGECNCaAa,	"消费机金额总数为 %g, 是否清零? "
	PrjConst_SGAIGAEUAEOEGiO,	"新通信速率,允许值: 9600, 19200, 38400:"
	PrjConst_SSS,	"%s-%s"
	PrjConst_SECNEYEuOGNOGAAAUEI,	"是否删除所有选中的门禁时段? "
	PrjConst_SECNCaYEuOGAAAUEI,	"是否清除所有的门禁时段? "
	PrjConst_SSAAUEIEyYO,	"%s门禁时段数超过4个, "
	PrjConst_SAAUEIEyYO,	"门禁时段数超过4个, "
	PrjConst_SUEOEyYAEOOOGCOAUOGGEeOA,	"假日数超过了20个, 只有前20个能有效设置"
	PrjConst_SUGASE,	"更新%s成功"
	PrjConst_SUGASEU,	"更新%s失败"
	PrjConst_SOyOUAEeSEEIu,	"正在读设备 \"%s\" (双击取消)..."
	PrjConst_SASONAEOU,	"卡号 %s 已经存在."
	PrjConst_SSAUIiOASE,	"\"COM%d-%.2x\"号机添加卡号\"%s\"成功"
	PrjConst_SSAUIiOASEFail,	"\"COM%d-%.2x\"号机添加卡号\"%s\"失败"
	PrjConst_SIiOEeS,	"添加设备“%s”"
	PrjConst_SGEeUDOAEUECNOEOAS,	"写入第 %d 张卡失败, 是否重试?\r\n卡号:%s"
	PrjConst_SONEGEeDOAEUDOA,	"已成功写入 %d 个卡号, 失败 %d 个卡号."
	PrjConst_SEGEeDOA,	"成功写入 %d 个卡号,总共耗时%d小时%d分钟%d秒"
	PrjConst_SGEeEUDOA,	"写入失败 %d 个卡号"
	PrjConst_SOyOUGEeSS,	"正在写设备 \"COM%d-%.2x\"..."
	PrjConst_SSAUEIEYASE,	"\"COM%d-%.2x\"号机上删除卡号\"%s\"成功"
	PrjConst_SSAUEIEYASEU,	"\"COM%d-%.2x\"号机上删除卡号\"%s\"失败"
	PrjConst_SECNEYEuOGNOGAA,	"是否删除所有选中的卡号? "
	PrjConst_SOEeEYEECNOAGIOGEY,	"从设备删除不成功, 是否从列表中删除?"
	PrjConst_SSAUGSSAASE,	"\"%.2x\"号机修改卡号\"%s\"成功"
	PrjConst_SSAUGSSAASEU,	"\"%.2x\"号机修改卡号\"%s\"失败,请添加通行时间段!"
	PrjConst_SSSAUEuOGCCAONCaY,	"\"COM%d-%.2x\"号机所有登记卡号已经被清除. "
	PrjConst_SCaYCCIIo,	"清除登记卡错误!"
	PrjConst_SSCOMD,	"COM%d-%.2x"
	PrjConst_SOEG,	"自动识别"
	PrjConst_SEmpName,	"姓名"
	PrjConst_SChargeMoney,	"充值金额"
	PrjConst_SCeEaEe,	"请输入"
	PrjConst_SCeEaEeIEyOGAUA,	"请输入2位数字新机号:"
	PrjConst_SCeEOUCOMDEUEIOAOOGOIEeNOoEuOGEeAAIIOOUAECNIGEeOAUA,	"请确定在\"COM%d\"端口上只连接有一台设备, 否则所有设备将会被改为同一个机号\r\n是否继续设置机号?"
	PrjConst_SCeEaEeIGAUAEEEOU,	"请输入1位新机器标识字符:"
	PrjConst_SAUOUOOEUIiOIaIUA,	"不能在一个端口添加相同机号"
	PrjConst_SECNEYNOGAEuOGEe,	"是否删除选中的所有设备?"
	PrjConst_SAE1,	"警告"
	PrjConst_SSCOMDOEG,	"COM%d-%.2x(自动识别)"
	PrjConst_SOODOEeECNOEeEeAGI,	"找到%d个设备, 是否加入设备列表? "
	PrjConst_SAOGOOEe,	"没有找到设备. "
	PrjConst_SOUSSEIAEAEDIoEyYAEOUIASSOG,	"在\"COM%d-%.2x\"上读取了%d条数据,保存在文件\"%s\"中."
	PrjConst_msg_saved_error_record,	"读到%d条错误数据,保存在文件\"%s\"中."
	PrjConst_SEeISSEyY1,	"设备无数据. "
	PrjConst_SDSSUUNSS,	"%4.4d%1.1s%2.2x%4.4u%8.8u%1.2n%-10s%1s"
	PrjConst_SISSAEAaOAIAS,	"无法保存配置文件."
	PrjConst_SIIo,	"错误"
	PrjConst_SSSEAIS,	"\"COM%d-%.2x\"时间为:%s"
	PrjConst_SISSAUECNEOOOAEEeOACOMDEUEIAEuOGEeAEA,	"无法联机, 是否尝试以广播式设置\"COM%d\"端口上的所有设备的时间 ?"
	PrjConst_SSSEAEeOAE,	"\"COM%d-%.2x\"时间设置成功. "
	PrjConst_SSSEAEeOAEU,	"\"COM%d-%.2x\"时间设置失败! "
	PrjConst_SIO,	"停止"
	PrjConst_SCeNOnUAEEAN,	"请选择机器(可多选)"
	PrjConst_SCeEOUCOMDEUEIOAOOGOIEeNOoEuOGEeAAIIaIAUIAECNIGEeOAUI,	"请确定在\"COM%d\"端口上只连接有一台设备, 否则所有设备将会被改为相同的管理卡号\r\n是否继续设置管理卡?"
	PrjConst_SOyOUUGAEeSS,	"正在更新设备 \"COM%d-%.2x\"..."
	PrjConst_SECNCaYEeAGIOGAEuOGA,	"是否清除设备列表中的所有卡号? "
	PrjConst_SCaYEeEECNCaYEeAGI,	"清除设备不成功, 是否清除设备卡列表?"
	PrjConst_SIuNUGIU,	"消费总金额(&U)"
	PrjConst_SOOIASSEU,	"创建或打开文件\"%s\"失败! "
	PrjConst_SOOEOOIASSEU,	"创建或打开日志文件\"%s\"失败! "
	PrjConst_SAICEeOUOEOEyYCGeEyYAEEeIECNEeOA,	"该 IC 设备在接收数据前必须将数据卡号长度设为 16, 是否设置? "
	PrjConst_SOyOUAEoOEOIGoCeEO,	"正在启动接收程序,请等候..."
	PrjConst_SIECAUEyIDIo,	"本次采集记录总数为 %d 条."
	PrjConst_SEeISSEyY,	"设备无数据."
	PrjConst_SAEeEADIoEyYONOyAEECNOEeCaY,	"该设备全部的 %d 条数据已正常读取.\r\n是否从设备清除?"
	PrjConst_SIGAIIo,	"通信错误."
	PrjConst_SIGAGNeIIo,	"通信校验错误."
	PrjConst_SOEOYIOGO,	"接收过程被中止."
	PrjConst_SIOIIo,	"未知错误."
	PrjConst_SOyOUAESSEyY,	"正在读取\"COM%d-%.2x\"数据... "
	PrjConst_SOAOGOAEAEUAESSAEAEDIoEyY,	"用户中止了读取机器\"COM%d-%.2x\", 共读取了\"%d\"条数据."
	PrjConst_SONAEDIoCA,	"已读取 %d 条记录"
	PrjConst_SSSUAEyYIIoOyOUOEOUDI,	"\"COM%d-%.2x\"机读数据错误, 正在重试第 %d 次... "
	PrjConst_SAuEEOOGOEyYOEOAg,	"您确实要中止数据接收吗?"
	PrjConst_SOyOUAXXOONIeED,	"正在读 0x%.*x 页, 已完成 %d%%."
	PrjConst_SOAOGO,	"用户中止!"
	PrjConst_SOKCaption,	"确定(&O)"
	PrjConst_SCancelCaption,	"取消(&C)"
	PrjConst_SCeNOnUAE,	"请选择机器! "
	PrjConst_SIaE,	"提示"
	PrjConst_SINU,	"脱机"
	PrjConst_SOyOUAOSS,	"正在联接COM%d 端口 %.2x 机\"..."
	PrjConst_SAU,	"联机"
	PrjConst_SAOE,	"联接成功."
	PrjConst_SIGAEUAEB,	"通信速率(&B)"
	PrjConst_SISSOEUCOMD,	"无法打开端口 \"COM%d\""
	PrjConst_SISSAOEeSS,	"无法联接设备\"COM%d-%.2x\""
	PrjConst_SAOOK,	"联接 OK."
	PrjConst_SSCOMDISSIN,	"COM%d-%.2x(无法通讯)"
	PrjConst_FMark,	"[mark]"
	PrjConst_FFlag,	"[flag]"
	PrjConst_FWeek,	"[week]"
	PrjConst_FConsume,	"[consume]"
	PrjConst_FBalance,	"[balance]"
	PrjConst_FTimes,	"[times]"
	PrjConst_Ftab,	"\\t"
	PrjConst_SAEOI,	"普通"
	PrjConst_SAUAeEuG,	"密码生效"
	PrjConst_SEuG,	"报警生效"
	PrjConst_SAEuG,	"按钮生效"
	PrjConst_SAAE,	"门锁常开"
	PrjConst_SAAA,	"门磁报警"
	PrjConst_SOyOUAEUDDIoCA,	"正在保存第 %d/%d 条记录..."
	PrjConst_SCAGNeIIoECNAE,	"记录校验错误, 是否保存? "
	PrjConst_SECNIGOEO,	"是否继续接收? "
	PrjConst_SGateFile,	"PassCard_COM%d_%.2x.lst"
	PrjConst_SAllowFile,	"AllowCard_COM%d_%.2x.lst"
	PrjConst_SBlackFile,	"BlackCard_COM%d_%.2x.lst"
	PrjConst_LogFile,	"TimeClock.log"
	PrjConst_Endl,	"\r\n"
	PrjConst_FDoor,	"[door]"
	PrjConst_FDevice,	"[devid]"
	PrjConst_FCard,	"[card]"
	PrjConst_FEmpId,	"[empid]"
	PrjConst_FYear,	"[year]"
	PrjConst_FYear2,	"[year2]"
	PrjConst_FMonth,	"[month]"
	PrjConst_FDay,	"[day]"
	PrjConst_FHour,	"[hour]"
	PrjConst_FMin,	"[min]"
	PrjConst_FSec,	"[sec]"
	PrjConst_XiaZaiStr0,	"普通下载"
	PrjConst_XiaZaiStr1,	"分页下载"
	PrjConst_XiaZaiStr2,	"广播下载"
	PrjConst_TimePeriod,	"请添加通行时段,否则该卡号无法通行!"
	PrjConst_SAppTitle,	"依时利通用接口软件"
	PrjConst_DevSec,	"Device List"
	PrjConst_RegFile,	"TimeClock.ini"
	PrjConst_SetSec,	"Settings"
	PrjConst_SSECOND,	"秒"
	PrjConst_SDAY,	"天"
	PrjConst_SFirstWinMsg,	"First Window Message"
	PrjConst_SNormalMsg,	"Normal Message"
	PrjConst_SBrushMsg,	"Welcome Message"
	PrjConst_SBrushSec,	"Brush Periods COM%d-%.2x"
	PrjConst_SRingTimeSec,	"Ring Times COM%d-%.2x"
	PrjConst_SGroupCheckSec,	"Group Check COM%d-%.2x"
END