⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 kgdb.c

📁 UBOOT 源码
💻 C
字号:
#include <common.h>#include <command.h>#if (CONFIG_COMMANDS & CFG_CMD_KGDB)#include <kgdb.h>#include <asm/signal.h>#include <asm/processor.h>#define PC_REGNUM 64#define SP_REGNUM 1void breakinst(void);intkgdb_setjmp(long *buf){	asm ("mflr 0; stw 0,0(%0);"	     "stw 1,4(%0); stw 2,8(%0);"	     "mfcr 0; stw 0,12(%0);"	     "stmw 13,16(%0)"	     : : "r" (buf));	/* XXX should save fp regs as well */	return 0;}voidkgdb_longjmp(long *buf, int val){	if (val == 0)		val = 1;	asm ("lmw 13,16(%0);"	     "lwz 0,12(%0); mtcrf 0x38,0;"	     "lwz 0,0(%0); lwz 1,4(%0); lwz 2,8(%0);"	     "mtlr 0; mr 3,%1"	     : : "r" (buf), "r" (val));}static inline unsigned longget_msr(void){	unsigned long msr;	asm volatile("mfmsr %0" : "=r" (msr):);	return msr;}static inline voidset_msr(unsigned long msr){	asm volatile("mtmsr %0" : : "r" (msr));}/* Convert the SPARC hardware trap type code to a unix signal number. *//* * This table contains the mapping between PowerPC hardware trap types, and * signals, which are primarily what GDB understands. */static struct hard_trap_info{	unsigned int tt;		/* Trap type code for powerpc */	unsigned char signo;		/* Signal that we map this trap into */} hard_trap_info[] = {	{ 0x200, SIGSEGV },			/* machine check */	{ 0x300, SIGSEGV },			/* address error (store) */	{ 0x400, SIGBUS },			/* instruction bus error */	{ 0x500, SIGINT },			/* interrupt */	{ 0x600, SIGBUS },			/* alingment */	{ 0x700, SIGTRAP },			/* breakpoint trap */	{ 0x800, SIGFPE },			/* fpu unavail */	{ 0x900, SIGALRM },			/* decrementer */	{ 0xa00, SIGILL },			/* reserved */	{ 0xb00, SIGILL },			/* reserved */	{ 0xc00, SIGCHLD },			/* syscall */	{ 0xd00, SIGTRAP },			/* single-step/watch */	{ 0xe00, SIGFPE },			/* fp assist */	{ 0, 0}				/* Must be last */};static intcomputeSignal(unsigned int tt){	struct hard_trap_info *ht;	for (ht = hard_trap_info; ht->tt && ht->signo; ht++)		if (ht->tt == tt)			return ht->signo;	return SIGHUP;         /* default for things we don't know about */}voidkgdb_enter(struct pt_regs *regs, kgdb_data *kdp){	unsigned long msr;	kdp->private[0] = msr = get_msr();	set_msr(msr & ~MSR_EE);	/* disable interrupts */	if (regs->nip == (unsigned long)breakinst) {		/* Skip over breakpoint trap insn */		regs->nip += 4;	}	regs->msr &= ~MSR_SE;	/* reply to host that an exception has occurred */	kdp->sigval = computeSignal(regs->trap);	kdp->nregs = 2;	kdp->regs[0].num = PC_REGNUM;	kdp->regs[0].val = regs->nip;	kdp->regs[1].num = SP_REGNUM;	kdp->regs[1].val = regs->gpr[SP_REGNUM];}voidkgdb_exit(struct pt_regs *regs, kgdb_data *kdp){	unsigned long msr = kdp->private[0];	if (kdp->extype & KGDBEXIT_WITHADDR)		regs->nip = kdp->exaddr;	switch (kdp->extype & KGDBEXIT_TYPEMASK) {	case KGDBEXIT_KILL:	case KGDBEXIT_CONTINUE:		set_msr(msr);		break;	case KGDBEXIT_SINGLE:		regs->msr |= MSR_SE;#if 0		set_msr(msr | MSR_SE);#endif		break;	}}intkgdb_trap(struct pt_regs *regs){	return (regs->trap);}/* return the value of the CPU registers. * some of them are non-PowerPC names :( * they are stored in gdb like: * struct { *     u32 gpr[32]; *     f64 fpr[32]; *     u32 pc, ps, cnd, lr; (ps=msr) *     u32 cnt, xer, mq; * } */#define SPACE_REQUIRED	((32*4)+(32*8)+(6*4))#ifdef CONFIG_8260/* store floating double indexed */#define STFDI(n,p)	__asm__ __volatile__ ("stfd " #n ",%0" : "=o"(p[2*n]))/* store floating double multiple */#define STFDM(p)	{ STFDI( 0,p); STFDI( 1,p); STFDI( 2,p); STFDI( 3,p); \			  STFDI( 4,p); STFDI( 5,p); STFDI( 6,p); STFDI( 7,p); \			  STFDI( 8,p); STFDI( 9,p); STFDI(10,p); STFDI(11,p); \			  STFDI(12,p); STFDI(13,p); STFDI(14,p); STFDI(15,p); \			  STFDI(16,p); STFDI(17,p); STFDI(18,p); STFDI(19,p); \			  STFDI(20,p); STFDI(21,p); STFDI(22,p); STFDI(23,p); \			  STFDI(24,p); STFDI(25,p); STFDI(26,p); STFDI(27,p); \			  STFDI(28,p); STFDI(29,p); STFDI(30,p); STFDI(31,p); }#endifintkgdb_getregs(struct pt_regs *regs, char *buf, int max){	int i;	unsigned long *ptr = (unsigned long *)buf;	if (max < SPACE_REQUIRED)		kgdb_error(KGDBERR_NOSPACE);	if ((unsigned long)ptr & 3)		kgdb_error(KGDBERR_ALIGNFAULT);	/* General Purpose Regs */	for (i = 0; i < 32; i++)		*ptr++ = regs->gpr[i];	/* Floating Point Regs */#ifdef CONFIG_8260	STFDM(ptr);	ptr += 32*2;#else	for (i = 0; i < 32; i++) {		*ptr++ = 0;		*ptr++ = 0;	}#endif	/* pc, msr, cr, lr, ctr, xer, (mq is unused) */	*ptr++ = regs->nip;	*ptr++ = regs->msr;	*ptr++ = regs->ccr;	*ptr++ = regs->link;	*ptr++ = regs->ctr;	*ptr++ = regs->xer;	return (SPACE_REQUIRED);}/* set the value of the CPU registers */#ifdef CONFIG_8260/* load floating double */#define LFD(n,v)	__asm__ __volatile__ ("lfd " #n ",%0" :: "o"(v))/* load floating double indexed */#define LFDI(n,p)	__asm__ __volatile__ ("lfd " #n ",%0" :: "o"((p)[2*n]))/* load floating double multiple */#define LFDM(p)		{ LFDI( 0,p); LFDI( 1,p); LFDI( 2,p); LFDI( 3,p); \			  LFDI( 4,p); LFDI( 5,p); LFDI( 6,p); LFDI( 7,p); \			  LFDI( 8,p); LFDI( 9,p); LFDI(10,p); LFDI(11,p); \			  LFDI(12,p); LFDI(13,p); LFDI(14,p); LFDI(15,p); \			  LFDI(16,p); LFDI(17,p); LFDI(18,p); LFDI(19,p); \			  LFDI(20,p); LFDI(21,p); LFDI(22,p); LFDI(23,p); \			  LFDI(24,p); LFDI(25,p); LFDI(26,p); LFDI(27,p); \			  LFDI(28,p); LFDI(29,p); LFDI(30,p); LFDI(31,p); }#endifvoidkgdb_putreg(struct pt_regs *regs, int regno, char *buf, int length){	unsigned long *ptr = (unsigned long *)buf;	if (regno < 0 || regno >= 70)		kgdb_error(KGDBERR_BADPARAMS);	else if (regno >= 32 && regno < 64) {		if (length < 8)			kgdb_error(KGDBERR_NOSPACE);	}	else {		if (length < 4)			kgdb_error(KGDBERR_NOSPACE);	}	if ((unsigned long)ptr & 3)		kgdb_error(KGDBERR_ALIGNFAULT);	if (regno >= 0 && regno < 32)		regs->gpr[regno] = *ptr;	else switch (regno) {#ifdef CONFIG_8260#define caseF(n) \	case (n) + 32:	LFD(n, *ptr);		break;caseF( 0) caseF( 1) caseF( 2) caseF( 3) caseF( 4) caseF( 5) caseF( 6) caseF( 7)caseF( 8) caseF( 9) caseF(10) caseF(11) caseF(12) caseF(13) caseF(14) caseF(15)caseF(16) caseF(17) caseF(18) caseF(19) caseF(20) caseF(21) caseF(22) caseF(23)caseF(24) caseF(25) caseF(26) caseF(27) caseF(28) caseF(29) caseF(30) caseF(31)#undef caseF#endif	case 64:	regs->nip = *ptr;	break;	case 65:	regs->msr = *ptr;	break;	case 66:	regs->ccr = *ptr;	break;	case 67:	regs->link = *ptr;	break;	case 68:	regs->ctr = *ptr;	break;	case 69:	regs->ctr = *ptr;	break;	default:		kgdb_error(KGDBERR_BADPARAMS);	}}voidkgdb_putregs(struct pt_regs *regs, char *buf, int length){	int i;	unsigned long *ptr = (unsigned long *)buf;	if (length < SPACE_REQUIRED)		kgdb_error(KGDBERR_NOSPACE);	if ((unsigned long)ptr & 3)		kgdb_error(KGDBERR_ALIGNFAULT);	/*	 * If the stack pointer has moved, you should pray.	 * (cause only god can help you).	 */	/* General Purpose Regs */	for (i = 0; i < 32; i++)		regs->gpr[i] = *ptr++;	/* Floating Point Regs */#ifdef CONFIG_8260	LFDM(ptr);#endif	ptr += 32*2;	/* pc, msr, cr, lr, ctr, xer, (mq is unused) */	regs->nip = *ptr++;	regs->msr = *ptr++;	regs->ccr = *ptr++;	regs->link = *ptr++;	regs->ctr = *ptr++;	regs->xer = *ptr++;}/* This function will generate a breakpoint exception.  It is used at the   beginning of a program to sync up with a debugger and can be used   otherwise as a quick means to stop program execution and "break" into   the debugger. */voidkgdb_breakpoint(int argc, char *argv[]){	asm("	.globl breakinst\n\	     breakinst: .long 0x7d821008\n\	    ");}#endif /* CFG_CMD_KGDB */

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -