⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 stamp.c

📁 UBOOT 源码
💻 C
字号:
/* * U-boot - stamp.c STAMP board specific routines * * Copyright (c) 2005 blackfin.uclinux.org * * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */#include <common.h>#include <asm/mem_init.h>#include "stamp.h"DECLARE_GLOBAL_DATA_PTR;#define STATUS_LED_OFF 0#define STATUS_LED_ON  1#ifdef CONFIG_SHOW_BOOT_PROGRESS# define SHOW_BOOT_PROGRESS(arg)	show_boot_progress(arg)#else# define SHOW_BOOT_PROGRESS(arg)#endifint checkboard (void){	printf ("CPU:   ADSP BF533 Rev.: 0.%d\n", *pCHIPID >> 28);	printf ("Board: ADI BF533 Stamp board\n");	printf ("       Support: http://blackfin.uclinux.org/\n");	printf ("       Richard Klingler <richard@uclinux.net>\n");	return 0;}long int initdram (int board_type){#ifdef DEBUG	printf ("SDRAM attributes:\n");	printf ("  tRCD:%d Cycles; tRP:%d Cycles; tRAS:%d Cycles; tWR:%d Cycles; "		"CAS Latency:%d cycles\n",		(SDRAM_tRCD >> 15),		(SDRAM_tRP >> 11),		(SDRAM_tRAS >> 6),		(SDRAM_tWR >> 19),		(SDRAM_CL >> 2));	printf ("SDRAM Begin: 0x%x\n", CFG_SDRAM_BASE);	printf ("Bank size = %d MB\n", 128);#endif	gd->bd->bi_memstart = CFG_SDRAM_BASE;	gd->bd->bi_memsize = CFG_MAX_RAM_SIZE;	return (gd->bd->bi_memsize);}void swap_to (int device_id){	if (device_id == ETHERNET) {		*pFIO_DIR = PF0;		asm ("ssync;");		*pFIO_FLAG_S = PF0;		asm ("ssync;");	} else if (device_id == FLASH) {		*pFIO_DIR = (PF4 | PF3 | PF2 | PF1 | PF0);		*pFIO_FLAG_S = (PF4 | PF3 | PF2);		*pFIO_MASKA_D = (PF8 | PF6 | PF5);		*pFIO_MASKB_D = (PF7);		*pFIO_POLAR = (PF8 | PF6 | PF5);		*pFIO_EDGE = (PF8 | PF7 | PF6 | PF5);		*pFIO_INEN = (PF8 | PF7 | PF6 | PF5);		*pFIO_FLAG_D = (PF4 | PF3 | PF2);		asm ("ssync;");	} else {		printf ("Unknown bank to switch\n");	}	return;}#if defined(CONFIG_MISC_INIT_R)/* miscellaneous platform dependent initialisations */int misc_init_r (void){	int i;	int cf_stat = 0;	/* Check whether CF card is inserted */	*pFIO_EDGE = FIO_EDGE_CF_BITS;	*pFIO_POLAR = FIO_POLAR_CF_BITS;	for (i = 0; i < 0x300; i++)		asm ("nop;");	if ((*pFIO_FLAG_S) & CF_STAT_BITS) {		cf_stat = 0;	} else {		cf_stat = 1;	}	*pFIO_EDGE = FIO_EDGE_BITS;	*pFIO_POLAR = FIO_POLAR_BITS;	if (cf_stat) {		printf ("Booting from COMPACT flash\n");		/* Set cycle time for CF */		*(volatile unsigned long *) ambctl1 = CF_AMBCTL1VAL;		for (i = 0; i < 0x1000; i++)			asm ("nop;");		for (i = 0; i < 0x1000; i++)			asm ("nop;");		for (i = 0; i < 0x1000; i++)			asm ("nop;");		serial_setbrg ();		ide_init ();		setenv ("bootargs", "");		setenv ("bootcmd",			"fatload ide 0:1 0x1000000 uImage-stamp;bootm 0x1000000;bootm 0x20100000");	} else {		printf ("Booting from FLASH\n");	}	return 1;}#endif#ifdef CONFIG_STAMP_CFvoid cf_outb (unsigned char val, volatile unsigned char *addr){	/*	 * Set PF1 PF0 respectively to 0 1 to divert address	 * to the expansion memory banks	 */	*pFIO_FLAG_S = CF_PF0;	*pFIO_FLAG_C = CF_PF1;	asm ("ssync;");	*(addr) = val;	asm ("ssync;");	/* Setback PF1 PF0 to 0 0 to address external	 * memory banks  */	*(volatile unsigned short *) pFIO_FLAG_C = CF_PF1_PF0;	asm ("ssync;");}unsigned char cf_inb (volatile unsigned char *addr){	volatile unsigned char c;	*pFIO_FLAG_S = CF_PF0;	*pFIO_FLAG_C = CF_PF1;	asm ("ssync;");	c = *(addr);	asm ("ssync;");	*pFIO_FLAG_C = CF_PF1_PF0;	asm ("ssync;");	return c;}void cf_insw (unsigned short *sect_buf, unsigned short *addr, int words){	int i;	*pFIO_FLAG_S = CF_PF0;	*pFIO_FLAG_C = CF_PF1;	asm ("ssync;");	for (i = 0; i < words; i++) {		*(sect_buf + i) = *(addr);		asm ("ssync;");	}	*pFIO_FLAG_C = CF_PF1_PF0;	asm ("ssync;");}void cf_outsw (unsigned short *addr, unsigned short *sect_buf, int words){	int i;	*pFIO_FLAG_S = CF_PF0;	*pFIO_FLAG_C = CF_PF1;	asm ("ssync;");	for (i = 0; i < words; i++) {		*(addr) = *(sect_buf + i);		asm ("ssync;");	}	*pFIO_FLAG_C = CF_PF1_PF0;	asm ("ssync;");}#endifvoid stamp_led_set (int LED1, int LED2, int LED3){	*pFIO_INEN &= ~(PF2 | PF3 | PF4);	*pFIO_DIR |= (PF2 | PF3 | PF4);	if (LED1 == STATUS_LED_OFF)		*pFIO_FLAG_S = PF2;	else		*pFIO_FLAG_C = PF2;	if (LED2 == STATUS_LED_OFF)		*pFIO_FLAG_S = PF3;	else		*pFIO_FLAG_C = PF3;	if (LED3 == STATUS_LED_OFF)		*pFIO_FLAG_S = PF4;	else		*pFIO_FLAG_C = PF4;	asm ("ssync;");}void show_boot_progress (int status){	switch (status) {	case 1:		stamp_led_set (STATUS_LED_OFF, STATUS_LED_OFF, STATUS_LED_ON);		break;	case 2:		stamp_led_set (STATUS_LED_OFF, STATUS_LED_ON, STATUS_LED_OFF);		break;	case 3:		stamp_led_set (STATUS_LED_OFF, STATUS_LED_ON, STATUS_LED_ON);		break;	case 4:		stamp_led_set (STATUS_LED_ON, STATUS_LED_OFF, STATUS_LED_OFF);		break;	case 5:	case 6:		stamp_led_set (STATUS_LED_ON, STATUS_LED_OFF, STATUS_LED_ON);		break;	case 7:	case 8:		stamp_led_set (STATUS_LED_ON, STATUS_LED_ON, STATUS_LED_OFF);		break;	case 9:	case 10:	case 11:	case 12:	case 13:	case 14:	case 15:		stamp_led_set (STATUS_LED_OFF, STATUS_LED_OFF,			       STATUS_LED_OFF);		break;	default:		stamp_led_set (STATUS_LED_ON, STATUS_LED_ON, STATUS_LED_ON);		break;	}}

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -