reg-qc.h

M68HC08及HCS08系列单片机bootloader引导程序源码/示例

;*********************************************************************
; HEADER_START
;
;  	   $File Name: Reg-qc.h$
;      Project:        Developper's HC08 Bootloader Slave
;      Description:    QB/QC header file (not complete!)
;      Platform:       HC08
;      $Version: 6.0.2.0$
;      $Date: Jul-25-2005$ 
;      $Last Modified By: r30323$
;      Company:        Freescale Semiconductor
;      Security:       General Business
;
; =================================================================== 
; Copyright (c):      Freescale Semiconductor, 2004, All rights reserved.
;
; =================================================================== 
; THIS SOFTWARE IS PROVIDED BY FREESCALE "AS IS" AND ANY
; EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
; IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
; PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL FREESCALE OR
; ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
; SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
; NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
; HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
; STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
; ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
; OF THE POSSIBILITY OF SUCH DAMAGE.
; ===================================================================
;
; HEADER_END

	ifndef	_REG_H
_REG_H	equ	1

;***********************
; PORTS SECTION
;***********************

PTA   	equ	$0000		;port A
PTB   	equ	$0001		;port B

DDRA	equ	$0004		;port A data direction reg.
DDRB	equ	$0005		;port B data direction reg.

PTAPUE	equ	$000B		;port A pull-up enable
PTBPUE	equ	$000C		;port B pull-up enable


;***********************
; SCI SECTION
;***********************

SCC1	equ	$0010		;SCI ctrl reg 1
SCC2	equ	$0011		;SCI ctrl reg 2
SCC3	equ	$0012		;SCI ctrl reg 3
SCS1	equ	$0013		;SCI stat reg 1
SCS2	equ	$0014		;SCI stat reg 2
SCDR	equ	$0015		;SCI data reg
SCBR	equ	$0016		;SCI baudrate reg
SCPSC	equ	$0017		;ESCI baudrate prescaler reg
SCIACTL equ	$0018		;ESCI arbiter ctl
SCIADAT	equ	$0019		;ESCI arbiter data


;***********************
; KEYBOARD SECTION
;***********************

KBSR	equ	$001a		;KBD stat & ctrl reg
KBIER	equ	$001b		;KBD int. enable



;***********************
; INTERRUPT SECTION
;***********************

INTSCR	equ	$001d		;IRQ stat & ctrl reg


;***********************
; CONFIG SECTION
;***********************

CONFIG2	equ	$001e		;config reg 2
CONFIG1	equ	$001f		;config reg 1


;***********************
; TIMER SECTION
;***********************

TSC	equ	$0020		;TMR stat & ctrl reg
TCNTH	equ	$0021		;TMR hi
TCNTL	equ	$0022		;TMR lo
TMODH	equ	$0023		;TMR modulo hi
TMODL	equ	$0024		;TMR modulo lo
TSC0	equ	$0025		;TMR ch0 stat & ctrl reg
TCH0H	equ	$0026		;TMC ch0 reg hi
TCH0L	equ	$0027		;TMC ch0 reg lo
TSC1	equ	$0028		;TMR ch1 stat & ctrl reg
TCH1H	equ	$0029		;TMC ch1 reg hi
TCH1L	equ	$002a		;TMC ch1 reg lo


;***********************
; A/D SECTION
;***********************

ADSCR	equ	$003c		;AD ctrl & stat reg
ADR	    equ	$003e		;AD data reg
ADCLK	equ	$003f		;AD clk reg


;***********************
; CLOCK SECTION
;***********************

OSCSC	equ	$0036		;ICG stat & ctrl reg
OSCTRIM	equ	$0038		;ICG trim reg

;***********************
; TEST, SIM SECTION
;***********************

SRSR	equ	$fe01		;SIM RESET STAT REG

INT1	equ	$fe04		;Interrupt stat reg 1
INT2	equ	$fe05		;Interrupt stat reg 2
INT3	equ	$fe06		;Interrupt stat reg 3

FLCR	equ	$fe08		;FLASH ctrl reg

LVISR	equ	$fe0c		;LVI stat reg

OSCTRIMF equ $FFC0       ; this is where manufacturer value is stored

;FLBPR	 equ	$ffbe		;FLASH blk protection reg
COPCTL	equ	$ffff		;COP ctrl reg

	ENDIF
	END