mtk_mcu.h_tmp

多串口下载手机软件的软件

/*****************************************************************************
*  Copyright Statement:
*  --------------------
*  This software is protected by Copyright and the information contained
*  herein is confidential. The software may not be copied and the information
*  contained herein may not be used or disclosed except with the written
*  permission of MediaTek Inc. (C) 2005
*
*  BY OPENING THIS FILE, BUYER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES
*  THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE")
*  RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO BUYER ON
*  AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES,
*  EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
*  MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT.
*  NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE
*  SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR
*  SUPPLIED WITH THE MEDIATEK SOFTWARE, AND BUYER AGREES TO LOOK ONLY TO SUCH
*  THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. MEDIATEK SHALL ALSO
*  NOT BE RESPONSIBLE FOR ANY MEDIATEK SOFTWARE RELEASES MADE TO BUYER'S
*  SPECIFICATION OR TO CONFORM TO A PARTICULAR STANDARD OR OPEN FORUM.
*
*  BUYER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND CUMULATIVE
*  LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE,
*  AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE,
*  OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY BUYER TO
*  MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE.
*
*  THE TRANSACTION CONTEMPLATED HEREUNDER SHALL BE CONSTRUED IN ACCORDANCE
*  WITH THE LAWS OF THE STATE OF CALIFORNIA, USA, EXCLUDING ITS CONFLICT OF
*  LAWS PRINCIPLES.  ANY DISPUTES, CONTROVERSIES OR CLAIMS ARISING THEREOF AND
*  RELATED THERETO SHALL BE SETTLED BY ARBITRATION IN SAN FRANCISCO, CA, UNDER
*  THE RULES OF THE INTERNATIONAL CHAMBER OF COMMERCE (ICC).
*
*****************************************************************************/
/*******************************************************************************
 *  Copyright Statement:
 *  --------------------
 *  This software is protected by Copyright and the information contained
 *  herein is confidential. The software may not be copied and the information
 *  contained herein may not be used or disclosed except with the written
 *  permission of MediaTek Inc. (C) 2003
 *
 ******************************************************************************/

/*******************************************************************************
 * Filename:
 * ---------
 *  mtk_mcu.h
 *
 * Project:
 * --------
 *  BootRom Library
 *
 * Description:
 * ------------
 *  The definition of MediaTek chip types and external clock arguments.
 *
 * Author:
 * -------
 *  Amos Hsu (mtk00539)
 *
 *==============================================================================
 *           HISTORY
 * Below this line, this part is controlled by PVCS VM. DO NOT MODIFY!!
 *------------------------------------------------------------------------------
 * $Revision:   1.9  $
 * $Modtime:   Mar 29 2005 11:52:02  $
 * $Log:   //mtkvs01/vmdata/flash_tool/archives/BootRom/mtk_mcu.h-arc  $
 * 
 *    Rev 1.9   Mar 29 2005 20:41:42   mtk00539
 * Add MT6228 chip id
 * Resolution for 107: [BROM_DLL v2.4.1010][New] Enhance bus test in FlashTest_DA, new INTEL flash support and bug fix.
 * 
 *    Rev 1.8   Aug 03 2004 10:42:44   mtk00539
 *  1. [DA][BUG FIX] Invoke Board_Schematic()(old name is HW_Init()) before FUTL_CheckDevice(). Because FUTL_CheckDevice() must know the absolute address for each bank.
 *  2. [DA][New] Add 12 new flash devices support 
 * 				[SAMSUNG]K5A3280YT,
 * 				[TOSHIBA]TH50VPF6782AASB,
 * 				[TOSHIBA]TH50VPF6783AASB,
 * 				[TOSHIBA]TV00578002AABD,
 * 				[TOSHIBA]TV00578003AABD,
 * 				[Fujitsu]MB84VP24581HK,
 * 				[INTEL]INTEL_28F640W30_B,
 * 				[SPANSION]AM49PDL127BH,
 * 				[SPANSION]AM49PDL129BH,
 * 				[RENESAS]M6MGD13BW66CDG,
 * 				[Winbond]W19B322TM,
 * 				[Winbond]W19B323TM,
 *  3. [DA][New] Readback check after WORD program is done, so that DA won't have to keep the chksum.
 *  4. [DA][New] Auto-detect baseband chip type.
 *  5. [DA][New] Auto-detect external SRAM size.
 *  6. [DA][New] Merge MT6205B, MT6218B and MT6219 to an all-in-one DA.
 *  7. [DA][New] Merge flash stress test module.
 *  8. [DA][New] Modify makefile to build ARM or THUMB code.
 *  9. [DA][New] Construct a customization kit for customers to add new flash or SOC checking algorithm by themselves.
 * 10. [DA][Enhance] Split out AM29PDL128G function to improve the performance of general AMD callback functions.
 * 11. [DA][Enhance] Enhance RX_BUFF_FULL behavior to prevent always retry two times.
 * Resolution for 83: [BROM_DLL v2.4.1002] Merge all the DAs into all-in-one DA and fix many bugs and enhancement.
 * 
 *    Rev 1.7   May 21 2004 15:44:40   mtk00539
 *  1. [brom.dll][New] add J2ME_ROM resource for w04.21 load.
 *  2. [brom.dll][New] add MT6217 BootROM.
 *  3. [brom.dll][New] add Brom_DownloadData API.
 *  4. [brom.dll][New] remove Brom_Verify relative APIs.
 *  5. [brom.dll][Enhance] move region overlap checking from Rom_Load() to IsReady() for more convenience.
 * Resolution for 70: [BROM_DLL v2.3.1003][New] add J2ME_ROM resource for w04.21 load.
 * 
 *    Rev 1.6   Mar 02 2004 00:14:42   mtk00539
 * 1. [DA][Enhance] re-assign DA command id.
 * 2. [DA][Enhance] add DSP firmware version command.
 * 3. [DA][BUG FIX] fix unsigned var in while loop that causes infinite loop.
 * Resolution for 53: [BootRom v2.2.1007][Enhance] resource layout error detection.
 * 
 *    Rev 1.5   Nov 12 2003 14:14:44   mtk00539
 * Add SOC feature
 * Resolution for 35: [BootRom v2.1.1005][New] Add SOC feature.
 * 
 *    Rev 1.4   Sep 25 2003 13:57:54   mtk00539
 * brom.dll v2.1.1001, please see SCR(28) for more details.
 * Resolution for 28: [BootRom v2.1.1001][New] See the reasons below.
 * 
 *    Rev 1.3   Jun 30 2003 19:24:50   mtk00539
 * 1. [brom.dll][Add Features] Split flashtool function into brom.dll
 * 2. [brom.dll][Add Features] Add a fake MT6208 bootrom for FlashTool for Pluto version.
 * 3. [DA][Add Features] Check format range.
 * 4. [DA][Add Features] Report format percentage.
 * 5. [DA][Add Features] Support 6208 EVB/CEVB for double flash devices access.
 * 6. [DA][BUG FIXED] Fix DA pre-format sector bug, it shouldn't format beyond the max size of flash.
 * 7. [DA][BUG FIXED] Fix DA FlashTool MEM_CMD end_addr bug, FlashTool should use (begin_addr+length-1) as end_addr.
 * 8. [DA][BUG FIXED] Fix DA AM29DL640D, MB84VD23280FA and TC58FVB64 flash table error.
 * Resolution for 12: [BootRom v2.2.1001][New Version] Split flashtool function into brom.dll
 * 
 *    Rev 1.2   Jun 11 2003 21:26:24   mtk00539
 * 1. Modify BootRom library to support MT6218
 * 2. Modify DA to support AM29PDL128G flash
 * Resolution for 9: [FlashTool v2.2.1005][Add Feature] Support MT6218 and new flash AM29PDL128G
 * 
 *    Rev 1.1   May 20 2003 18:05:46   mtk00539
 * add copyright
 * Resolution for 6: [FlashTool v2.2][AddFeature] Support 6205/6205B at 13MHz, 26MHz and 52MHz.
 *
 *------------------------------------------------------------------------------
 * Upper this line, this part is controlled by PVCS VM. DO NOT MODIFY!!
 *==============================================================================
 *******************************************************************************/
#ifndef	_MTK_MCU_H_
#define	_MTK_MCU_H_

typedef enum {
	EXT_13M = 1,
	EXT_26M = 2,
	EXT_39M = 3,
	EXT_52M = 4,
	LAST_EXT_CLOCK = EXT_52M
} EXT_CLOCK;

typedef	enum {
	MT6205	= 0,
	MT6205B	= 1,
	MT6218	= 2,
	MT6208	= 3,
	MT6218B	= 4,
	MT6219  = 5,
	MT6217  = 6,
	MT6228  = 7,
	LAST_BBCHIP_TYPE = MT6228,
	UNKNOWN_BBCHIP_TYPE = 0xFF
} BBCHIP_TYPE;

#endif