i2c_debug_opt.bak

利用超级终端调TFT液晶驱动和一个I2C调试工具。

### uVision2 Project, (C) Keil Software
### Do not modify !

 cExt (*.c)
 aExt (*.s*; *.src; *.a*)
 oExt (*.obj)
 lExt (*.lib)
 tExt (*.txt; *.h; *.inc)
 pExt (*.plm)
 CppX (*.cpp)
 DaveTm { 0,0,0,0,0,0,0,0 }

Target (Target 1), 0x0000 // Tools: 'MCS-51'
GRPOPT 1,(Source Group 1),1,0,0

OPTFFF 1,1,1,201326592,0,27,38,0,<.\main.c><main.c> { 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,226,255,255,255,0,0,0,0,0,0,0,0,167,2,0,0,11,1,0,0 }
OPTFFF 1,2,1,50331650,0,173,185,0,<.\debug.c><debug.c> { 44,0,0,0,2,0,0,0,3,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,226,255,255,255,22,0,0,0,29,0,0,0,193,2,0,0,41,1,0,0 }
OPTFFF 1,3,1,536870912,0,29,35,0,<.\i2c.c><i2c.c> { 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,226,255,255,255,88,0,0,0,116,0,0,0,3,3,0,0,128,1,0,0 }

ExtF <.\define.h> 1,8,0,{ 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,226,255,255,255,44,0,0,0,58,0,0,0,215,2,0,0,70,1,0,0 }
ExtF <.\main.h> 1,1,0,{ 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,226,255,255,255,66,0,0,0,87,0,0,0,237,2,0,0,99,1,0,0 }
ExtF <.\i2c.h> 1,1,0,{ 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,226,255,255,255,0,0,0,0,0,0,0,0,171,2,0,0,12,1,0,0 }
ExtF <..\vp78\vp78\VP_GLOBAL.c> 1,1,0,{ 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,226,255,255,255,22,0,0,0,29,0,0,0,193,2,0,0,41,1,0,0 }

TARGOPT 1, (Target 1)
 CLK51=40000000
  OPTTT 1,1,1,0
  OPTHX 0,65535,0,0,0
  OPTLX 120,65,8,<.\>
  OPTOX 16
  OPTLT 1,1,1,0,1,1,0,1,0,0,0,0
  OPTXL 1,1,1,1,1,1,1,0,0
  OPTFL 1,0,1
  OPTBL 0,(Data Sheet)<DATASHTS\WINBOND\W78E58.PDF>
  OPTBL 1,(Add on databooks)<DATASHTS\ADDBOOKS.PDF>
  OPTBL 2,(Instruction Set Manual)<DATASHTS\INFINEON\M500.PDF>
  OPTDL (S8051.DLL)()(DP51.DLL)(-p54)(S8051.DLL)()(TP51.DLL)(-p54)
  OPTDBG 44029,0,()()()()()()()()()() ()()()()
  OPTDF 0x2
  OPTLE <>
  OPTLC <>
EndOpt