usb_drv.c

ATMEL公司AT89C51SND1为主控制器MP3源代码

/*C**************************************************************************
* NAME:         usb_drv.c
*----------------------------------------------------------------------------
* Copyright (c) 2003 Atmel.
*----------------------------------------------------------------------------
* RELEASE:      snd1c-refd-nf-4_0_3      
* REVISION:     1.12     
*----------------------------------------------------------------------------
* PURPOSE: 
* This file contains the USB driver routines
*
* NOTES:
* Driver Configuration (see config.h):
*   - VENDOR_ID               enum vendor ID delivered by USB organisation 
*   - PRODUCT_ID              enum product number
*   - RELEASE_NUMBER          enum release number
*   - USB_MANUFACTURER_NAME   mass storage manufacturer string (unicode)
*   - USB_MN_LENGTH           mass storage manufacturer string length
*   - USB_PRODUCT_NAME        mass storage product name string (unicode)
*   - USB_PN_LENGTH           mass storage product name string length
*   - USB_SERIAL_NUMBER       mass storage product serial nb string (unicode)
*   - USB_SN_LENGTH           mass storage product serial nb string length
*****************************************************************************/

/*_____ I N C L U D E S ____________________________________________________*/

#include "config.h"                         /* system configuration */
#include "usb_drv.h"                        /* usb driver definition */


/*_____ M A C R O S ________________________________________________________*/


/*_____ D E F I N I T I O N ________________________________________________*/

code struct usb_st_device_descriptor usb_device_descriptor =
  {
    sizeof(usb_device_descriptor), DEVICE, 0x1001, 0, 0, 0, EP_CONTROL_LENGTH,
    VENDOR_ID, PRODUCT_ID, RELEASE_NUMBER, MAN_INDEX, PROD_INDEX, SN_INDEX, 1
  };

code struct usb_st_manufacturer usb_manufacturer =
  {
    sizeof(usb_manufacturer), STRING,
    USB_MANUFACTURER_NAME
  };

code struct usb_st_product usb_product =
  {
    sizeof(usb_product), STRING,
    USB_PRODUCT_NAME
  };

code struct usb_st_serial_number usb_serial_number =
  {
    sizeof(usb_serial_number), STRING,
    USB_SERIAL_NUMBER
  };

code struct usb_st_language_descriptor usb_language =
  {
    sizeof(usb_language), STRING, 0x0904
  };

code struct  
  {
    struct usb_st_configuration_descriptor  cfg;
    struct usb_st_interface_descriptor      ifc;
    struct usb_st_endpoint_descriptor       ep1;
    struct usb_st_endpoint_descriptor       ep2;
  }
  usb_configuration =
    {
      { 9, CONFIGURATION, sizeof(usb_configuration) << 8, 1, 1, 0, USB_CONFIG_BUSPOWERED, 0x32},
      { 9, INTERFACE, 0, 0, 2, 0x08, 0x06, 0x50, 0 },
      { 7, ENDPOINT, 0x81, 0x02, EP_IN_LENGTH << 8, 0 },
      { 7, ENDPOINT, 0x02, 0x02, EP_OUT_LENGTH << 8, 0 }
    };

static  bdata bit     zlp;
static  idata Byte    endpoint_status[3];

static  idata Byte    *pbuffer;
static  idata Byte    bmRequestType;

/*_____ D E C L A R A T I O N ______________________________________________*/

extern  void    usb_mass_storage_reset (void);
extern  void    usb_mass_storage_get_lun (void);

static  void    usb_get_descriptor (void);
static  Byte*   send_ep0_packet (Byte *, Byte);
static  void    usb_read_request (void);
static  void    usb_set_address (void);
static  void    usb_set_configuration (void);
static  void    usb_clear_feature (void);
static  void    usb_set_feature (void);
static  void    usb_get_status (void);
static  void    usb_get_configuration (void);


/*F**************************************************************************
* NAME: usb_init
*----------------------------------------------------------------------------
* PARAMS:
*
* return:
*----------------------------------------------------------------------------
* PURPOSE: 
* This function initializes the USB controller and resets the endpoints FIFOs.
*----------------------------------------------------------------------------
* EXAMPLE:
*----------------------------------------------------------------------------
* NOTE: 
*----------------------------------------------------------------------------
* REQUIREMENTS: 
*****************************************************************************/
void usb_init (void)
{
  Usb_enable();                             /* enable USB */
  UEPRST = 0x07;                            /* Reset EP 0, 1 and 2 */
  UEPRST = 0x00;
  endpoint_status[EP_CONTROL] = 0x00;
  endpoint_status[EP_IN] = 0x00;
  endpoint_status[EP_OUT] = 0x00;
  Usb_select_ep(EP_CONTROL);                /* control endpoint config */
  UEPCONX = CONTROL;
}


/*F**************************************************************************
* NAME: usb_ep_init
*----------------------------------------------------------------------------
* PARAMS:
*
* return:
*----------------------------------------------------------------------------
* PURPOSE: 
* This function configures the endpoints.
*----------------------------------------------------------------------------
* EXAMPLE:
*----------------------------------------------------------------------------
* NOTE: 
*----------------------------------------------------------------------------
* REQUIREMENTS: 
*****************************************************************************/
void usb_ep_init (void)
{
  Usb_select_ep(EP_CONTROL);
  UEPCONX = CONTROL;
  Usb_select_ep(EP_IN);                     /* endpoints configuration */
  UEPCONX = BULK_IN ;
  Usb_select_ep(EP_OUT);
  UEPCONX = BULK_OUT;
  UEPRST = 0x07;
  UEPRST = 0x00;
}


/*F**************************************************************************
* NAME: usb_send_ep0_packet
*----------------------------------------------------------------------------
* PARAMS:
* *tbuf:        address of the first data to send
* data_length:  number of bytes to send
*
* return:       address of the next byte to send
*----------------------------------------------------------------------------
* PURPOSE: 
* This function sends the data over the default control endpoint.
*----------------------------------------------------------------------------
* EXAMPLE:
*----------------------------------------------------------------------------
* NOTE: 
*----------------------------------------------------------------------------
* REQUIREMENTS: 
*****************************************************************************/
Byte* send_ep0_packet (Byte *tbuf, Byte data_length)
{
Byte i;

  Usb_select_ep(EP_CONTROL);
  for (i = data_length; i != 0 ; i--, tbuf++)
  {
    Usb_write_byte(*tbuf); 
  }
  Usb_set_TXRDY();                          /* Send packet */
  return tbuf;
}


/*F**************************************************************************
* NAME: usb_enumeration_process
*----------------------------------------------------------------------------
* PARAMS:
*
* return:
*----------------------------------------------------------------------------
* PURPOSE: 
* This function manages the enumeration process
*----------------------------------------------------------------------------
* EXAMPLE:
*----------------------------------------------------------------------------
* NOTE: 
*----------------------------------------------------------------------------
* REQUIREMENTS: 
*****************************************************************************/
void usb_enumeration_process (void)
{ 
  Usb_select_ep(EP_CONTROL);
  usb_read_request();
}


/*F**************************************************************************
* NAME: usb_read_request
*----------------------------------------------------------------------------
* PARAMS:
*
* return:
*----------------------------------------------------------------------------
* PURPOSE: 
* This function reads the SETUP request sent to the default control endpoint
* and  the appropriate function. When exiting of the usb_read_request
* function, the device is ready to manage the next request.
*----------------------------------------------------------------------------
* EXAMPLE:
*----------------------------------------------------------------------------
* NOTE: list of supported requests:
*               GET_DESCRIPTOR
*               GET_CONFIGURATION
*               SET_ADDRESS
*               SET_CONFIGURATION
*               CLEAR_FEATURE
*               SET_FEATURE
*               GET_STATUS
*               GET_MAX_LUN
*               MASS_STORAGE_RESET
*----------------------------------------------------------------------------
* REQUIREMENTS: 
*****************************************************************************/
void usb_read_request (void)
{ 
  bmRequestType = Usb_read_byte();          /* read bmRequestType */

  switch (Usb_read_byte())                  /* test the bRequest value */
  {
    case GET_DESCRIPTOR:
      usb_get_descriptor();
      break;
    case GET_CONFIGURATION:
      usb_get_configuration();
      break;
    case SET_ADDRESS:
      usb_set_address();
      break;
    case SET_CONFIGURATION:
      usb_set_configuration();
      break;
    case CLEAR_FEATURE:
      usb_clear_feature();
      break;
    case SET_FEATURE:
      usb_set_feature();
      break;
    case GET_STATUS:
      usb_get_status();
      break;
    case GET_MAX_LUN:
      usb_mass_storage_get_lun();
      break;
    case MASS_STORAGE_RESET:
      usb_mass_storage_reset();
      break;
    default:
      Usb_clear_RXSETUP();
      Usb_set_STALLRQ();
      while (!Usb_STALL_sent());
      Usb_clear_STALLRQ();
      Usb_clear_STALLED();
      break;
  }
}


/*F**************************************************************************
* NAME: usb_set_address
*----------------------------------------------------------------------------
* PARAMS:
*
* return:
*----------------------------------------------------------------------------
* PURPOSE: 
* This function manages the SET_ADDRESS request. The new address is stored
* in the USBADDR register
*----------------------------------------------------------------------------
* EXAMPLE:
*----------------------------------------------------------------------------
* NOTE:
*----------------------------------------------------------------------------
* REQUIREMENTS: 
*****************************************************************************/
void usb_set_address (void)
{
Byte add;

  Usb_clear_DIR();
  add = Usb_read_byte();                    /* store the LSB of wValue = address */
  UEPRST = 0x01 ;
  UEPRST = 0x00 ;
  Usb_clear_RXSETUP();
  Usb_set_TXRDY();                          /* send a ZLP for STATUS phase */
  Usb_set_FADDEN();
  while (!(Usb_tx_complete()));
  Usb_clear_TXCMPL();
  Usb_configure_address(add);
}


/*F**************************************************************************
* NAME: usb_set_configuration
*----------------------------------------------------------------------------
* PARAMS:
*
* return:
*----------------------------------------------------------------------------
* PURPOSE: 
* This function manages the SET_CONFIGURATION request.
*----------------------------------------------------------------------------
* EXAMPLE:
*----------------------------------------------------------------------------
* NOTE:
*----------------------------------------------------------------------------
* REQUIREMENTS: 
*****************************************************************************/
void usb_set_configuration (void)
{
Uchar configuration_number;

  configuration_number = Usb_read_byte();
  Usb_clear_DIR();
  Usb_clear_RXSETUP();
  Usb_set_TXRDY();                          /* send a ZLP for STATUS phase */
  if (configuration_number == 0)
  {
    Usb_clear_CONFG();
  }
  else
  {
    Usb_set_CONFG();
  }
  while (!Usb_tx_complete());
  Usb_clear_TXCMPL();
  Usb_select_ep(EP_IN);                     /* endpoints configuration */
  UEPCONX = BULK_IN ;
  Usb_select_ep(EP_OUT);
  UEPCONX = BULK_OUT;
}


/*F**************************************************************************
* NAME: usb_get_descriptor
*----------------------------------------------------------------------------
* PARAMS:
*
* return:
*----------------------------------------------------------------------------
* PURPOSE: 
* This function manages the GET_DESCRIPTOR request.
*----------------------------------------------------------------------------
* EXAMPLE:
*----------------------------------------------------------------------------
* NOTE:
*----------------------------------------------------------------------------
* REQUIREMENTS: 
*****************************************************************************/
void usb_get_descriptor (void)
{
Byte    data_to_transfer;
Uint16  wLength;
Byte    descriptor_type;
Byte    string_type;

  Usb_set_DIR();                            /* set out on EP0 */
  zlp = FALSE;                              /* no zero length packet */

  string_type = Usb_read_byte();            /* read LSB of wValue */
  descriptor_type = Usb_read_byte();        /* read MSB of wValue */
  switch (descriptor_type)
  {
    case DEVICE:
    {
      data_to_transfer = sizeof (usb_device_descriptor);
      pbuffer = &(usb_device_descriptor.bLength);
      break;
    }

    case CONFIGURATION:
    {
      data_to_transfer = sizeof (usb_configuration);
      pbuffer = &(usb_configuration.cfg.bLength);
      break;
    }

    case STRING:
    {
      switch (string_type)
      {