domparser.hpp

基于属性证书的访问控制源代码,由c++编写,包括openssl,xercesc等

      * It parses the XML file and stops as soon as it comes across
      * a XML token (as defined in the XML specification).
      *
      * @param token A token maintaing state information to maintain
      *              internal consistency between invocation of 'parseNext'
      *              calls.
      *
      * @return 'true', if successful in parsing the next XML token.
      *         It indicates the user can go ahead with parsing the rest
      *         of the file. It returns 'false' to indicate that the parser
      *         could not find next token as per the XML specification
      *         production rule.
      *
      * @see #parseFirst(XMLCh*,...)
      * @see #parseFirst(char*,...)
      * @see #parseFirst(InputSource&,...)
      */
    bool parseNext(XMLPScanToken& token);

    /** Reset the parser after a progressive parse
      *
      * If a progressive parse loop exits before the end of the document
      * is reached, the parser has no way of knowing this. So it will leave
      * open any files or sockets or memory buffers that were in use at
      * the time that the parse loop exited.
      *
      * The next parse operation will cause these open files and such to
      * be closed, but the next parse operation might occur at some unknown
      * future point. To avoid this problem, you should reset the parser if
      * you exit the loop early.
      *
      * If you exited because of an error, then this cleanup will be done
      * for you. Its only when you exit the file prematurely of your own
      * accord, because you've found what you wanted in the file most
      * likely.
      *
      * @param token A token maintaing state information to maintain
      *              internal consistency between invocation of 'parseNext'
      *              calls.
      *
      * @see #parseFirst(XMLCh*,...)
      * @see #parseFirst(char*,...)
      * @see #parseFirst(InputSource&,...)
      */
    void parseReset(XMLPScanToken& token);

    //@}

    // -----------------------------------------------------------------------
    //  Grammar preparsing interface
    // -----------------------------------------------------------------------

    /** @name Implementation of Grammar preparsing interface's. */
    //@{
    /**
      * Preparse schema grammar (XML Schema, DTD, etc.) via an input source
      * object.
      *
      * This method invokes the preparsing process on a schema grammar XML
      * file specified by the SAX InputSource parameter. If the 'toCache' flag
      * is enabled, the parser will cache the grammars for re-use. If a grammar
      * key is found in the pool, no caching of any grammar will take place.
      *
      * <p><b>"Experimental - subject to change"</b></p>
      *
      * @param source A const reference to the SAX InputSource object which
      *               points to the schema grammar file to be preparsed.
      * @param grammarType The grammar type (Schema or DTD).
      * @param toCache If <code>true</code>, we cache the preparsed grammar,
      *                otherwise, no chaching. Default is <code>false</code>.
      * @return The preparsed schema grammar object (SchemaGrammar or
      *         DTDGrammar). That grammar object is owned by the parser.
      *
      * @exception SAXException Any SAX exception, possibly
      *            wrapping another exception.
      * @exception XMLException An exception from the parser or client
      *            handler code.
      * @exception DOMException A DOM exception as per DOM spec.
      *
      * @see InputSource#InputSource
      */
    Grammar* loadGrammar(const InputSource& source,
                         const short grammarType,
                         const bool toCache = false);

    /**
      * Preparse schema grammar (XML Schema, DTD, etc.) via a file path or URL
      *
      * This method invokes the preparsing process on a schema grammar XML
      * file specified by the file path parameter. If the 'toCache' flag
      * is enabled, the parser will cache the grammars for re-use. If a grammar
      * key is found in the pool, no caching of any grammar will take place.
      *
      * <p><b>"Experimental - subject to change"</b></p>
      *
      * @param systemId A const XMLCh pointer to the Unicode string which
      *                 contains the path to the XML grammar file to be
      *                 preparsed.
      * @param grammarType The grammar type (Schema or DTD).
      * @param toCache If <code>true</code>, we cache the preparsed grammar,
      *                otherwise, no chaching. Default is <code>false</code>.
      * @return The preparsed schema grammar object (SchemaGrammar or
      *         DTDGrammar). That grammar object is owned by the parser.
      *
      * @exception SAXException Any SAX exception, possibly
      *            wrapping another exception.
      * @exception XMLException An exception from the parser or client
      *            handler code.
      * @exception DOMException A DOM exception as per DOM spec.
      */
    Grammar* loadGrammar(const XMLCh* const systemId,
                         const short grammarType,
                         const bool toCache = false);

    /**
      * Preparse schema grammar (XML Schema, DTD, etc.) via a file path or URL
      *
      * This method invokes the preparsing process on a schema grammar XML
      * file specified by the file path parameter. If the 'toCache' flag
      * is enabled, the parser will cache the grammars for re-use. If a grammar
      * key is found in the pool, no caching of any grammar will take place.
      *
      * <p><b>"Experimental - subject to change"</b></p>
      *
      * @param systemId A const char pointer to a native string which contains
      *                 the path to the XML grammar file to be preparsed.
      * @param grammarType The grammar type (Schema or DTD).
      * @param toCache If <code>true</code>, we cache the preparsed grammar,
      *                otherwise, no chaching. Default is <code>false</code>.
      * @return The preparsed schema grammar object (SchemaGrammar or
      *         DTDGrammar). That grammar object is owned by the parser.
      *
      * @exception SAXException Any SAX exception, possibly
      *            wrapping another exception.
      * @exception XMLException An exception from the parser or client
      *            handler code.
      * @exception DOMException A DOM exception as per DOM spec.
      */
    Grammar* loadGrammar(const char* const systemId,
                         const short grammarType,
                         const bool toCache = false);

    /**
      * This method allows the user to reset the pool of cached grammars.
      */
    void resetCachedGrammarPool();

    //@}



    // -----------------------------------------------------------------------
    //  Implementation of the XMLErrorReporter interface.
    // -----------------------------------------------------------------------

    /** @name Implementation of the XMLErrorReporter interface. */
    //@{

    /** Handle errors reported from the parser
      *
      * This method is used to report back errors found while parsing the
      * XML file. This method is also borrowed from the SAX specification.
      * It calls the corresponding user installed Error Handler method:
      * 'fatal', 'error', 'warning' depending on the severity of the error.
      * This classification is defined by the XML specification.
      *
      * @param errCode An integer code for the error.
      * @param msgDomain A const pointer to an Unicode string representing
      *                  the message domain to use.
      * @param errType An enumeration classifying the severity of the error.
      * @param errorText A const pointer to an Unicode string representing
      *                  the text of the error message.
      * @param systemId  A const pointer to an Unicode string representing
      *                  the system id of the XML file where this error
      *                  was discovered.
      * @param publicId  A const pointer to an Unicode string representing
      *                  the public id of the XML file where this error
      *                  was discovered.
      * @param lineNum   The line number where the error occurred.
      * @param colNum    The column number where the error occurred.
      * @see ErrorHandler
      */
    virtual void error
    (
        const   unsigned int                errCode
        , const XMLCh* const                msgDomain
        , const XMLErrorReporter::ErrTypes  errType
        , const XMLCh* const                errorText
        , const XMLCh* const                systemId
        , const XMLCh* const                publicId
        , const XMLSSize_t                  lineNum
        , const XMLSSize_t                  colNum
    );

    /** Reset any error data before a new parse
     *
      * This method allows the user installed Error Handler callback to
      * 'reset' itself.
      *
      * <b><font color="#FF0000">This method is a no-op for this DOM
      * implementation.</font></b>
      */
    virtual void resetErrors();
    //@}


    // -----------------------------------------------------------------------
    //  Implementation of the XMLEntityHandler interface.
    // -----------------------------------------------------------------------

    /** @name Implementation of the XMLEntityHandler interface. */
    //@{

    /** Handle an end of input source event
      *
      * This method is used to indicate the end of parsing of an external
      * entity file.
      *
      * <b><font color="#FF0000">This method is a no-op for this DOM
      * implementation.</font></b>
      *
      * @param inputSource A const reference to the InputSource object
      *                    which points to the XML file being parsed.
      * @see InputSource
      */
    virtual void endInputSource(const InputSource& inputSource);

    /** Expand a system id
      *
      * This method allows an installed XMLEntityHandler to further
      * process any system id's of enternal entities encountered in
      * the XML file being parsed, such as redirection etc.
      *
      * <b><font color="#FF0000">This method always returns 'false'
      * for this DOM implementation.</font></b>
      *
      * @param systemId  A const pointer to an Unicode string representing
      *                  the system id scanned by the parser.
      * @param toFill    A pointer to a buffer in which the application
      *                  processed system id is stored.
      * @return 'true', if any processing is done, 'false' otherwise.
      */
    virtual bool expandSystemId
    (
        const   XMLCh* const    systemId
        ,       XMLBuffer&      toFill
    );

    /** Reset any entity handler information
      *
      * This method allows the installed XMLEntityHandler to reset
      * itself.
      *
      * <b><font color="#FF0000">This method is a no-op for this DOM
      * implementation.</font></b>
      */
    virtual void resetEntities();

    /** Resolve a public/system id
      *
      * This method allows a user installed entity handler to further
      * process any pointers to external entities. The applications can
      * implement 'redirection' via this callback. This method is also
      * borrowed from the SAX specification.
      *
      * @deprecated This method is no longer called (the other resolveEntity one is).
      *
      * @param publicId A const pointer to a Unicode string representing the
      *                 public id of the entity just parsed.
      * @param systemId A const pointer to a Unicode string representing the
      *                 system id of the entity just parsed.
      * @param baseURI  A const pointer to a Unicode string representing the
      *                 base URI of the entity just parsed,
      *                 or <code>null</code> if there is no base URI.
      * @return The value returned by the user installed resolveEntity
      *         method or NULL otherwise to indicate no processing was done.
      *         The returned InputSource is owned by the parser which is
      *         responsible to clean up the memory.
      * @see EntityResolver
      * @see XMLEntityHandler
      */
    virtual InputSource* resolveEntity
    (
        const   XMLCh* const    publicId
        , const XMLCh* const    systemId
        , const XMLCh* const    baseURI = 0
    );

    /** Resolve a public/system id
      *
      * This method allows a user installed entity handler to further
      * process any pointers to external entities. The applications can
      * implement 'redirection' via this callback.  
      *
      * @param resourceIdentifier An object containing the type of
      *        resource to be resolved and the associated data members
      *        corresponding to this type.
      * @return The value returned by the user installed resolveEntity
      *         method or NULL otherwise to indicate no processing was done.
      *         The returned InputSource is owned by the parser which is
      *         responsible to clean up the memory.
      * @see XMLEntityHandler
      * @see XMLEntityResolver
      */
    virtual InputSource* resolveEntity
    (
        XMLResourceIdentifier* resourceIdentifier
    );

    /** Handle a 'start input source' event
      *
      * This method is used to indicate the start of parsing an external
      * entity file.
      *
      * <b><font color="#FF0000">This method is a no-op for this DOM parse
      * implementation.</font></b>
      *
      * @param inputSource A const reference to the InputSource object
      *                    which points to the external entity
      *                    being parsed.
      */
    virtual void startInputSource(const InputSource& inputSource);

    //@}



    // -----------------------------------------------------------------------
    //  Implementation of the XMLDocumentHandler interface.
    // -----------------------------------------------------------------------

    /** @name Implementation of the XMLDocumentHandler interface. */
    //@{

    /** Handle document character events
      *
      * This method is used to report all the characters scanned by the
      * parser. This DOM implementation stores this data in the appropriate
      * DOM node, creating one if necessary.
      *
      * @param chars   A const pointer to a Unicode string representing the
      *                character data.
      * @param length  The length of the Unicode string returned in 'chars'.
      * @param cdataSection  A flag indicating if the characters represent
      *                      content from the CDATA section.
      */