📄 main.cpp
字号:
0x04,0x04,0x02,0x01,0x02,0x04,0x04,0x00,
/*-- 文字: 大 --*/
/*-- 宋体9; 此字体下对应的点阵为：宽x高=12x12 --*/
/*-- 高度不是8的倍数，现调整为：宽度x高度=12x16 --*/
0x08,0x08,0x08,0x08,0xC8,0x3F,0xC8,0x08,0x08,0x0C,0x08,0x00,0x04,0x04,0x02,0x01,
0x00,0x00,0x00,0x01,0x02,0x04,0x04,0x00,
/*-- 文字: 学 --*/
/*-- 宋体9; 此字体下对应的点阵为：宽x高=12x12 --*/
/*-- 高度不是8的倍数，现调整为：宽度x高度=12x16 --*/
0x9C,0x84,0x95,0x96,0x95,0xD6,0xB4,0x94,0x87,0x94,0x8C,0x00,0x00,0x00,0x00,0x04,
0x04,0x07,0x00,0x00,0x00,0x00,0x00,0x00,
/*-- 文字: 张 --*/
/*-- 宋体9; 此字体下对应的点阵为：宽x高=12x12 --*/
/*-- 高度不是8的倍数，现调整为：宽度x高度=12x16 --*/
0x79,0x49,0x49,0xCF,0x20,0xFF,0x30,0xE8,0x24,0x23,0x20,0x00,0x04,0x04,0x06,0x01,
0x00,0x07,0x04,0x02,0x01,0x02,0x04,0x00,
/*-- 文字: 家 --*/
/*-- 宋体9; 此字体下对应的点阵为：宽x高=12x12 --*/
/*-- 高度不是8的倍数，现调整为：宽度x高度=12x16 --*/
0x44,0x46,0x2A,0x9A,0x4A,0xBB,0xCA,0x4A,0xAA,0x12,0x06,0x00,0x04,0x05,0x03,0x02,
0x05,0x04,0x07,0x00,0x00,0x01,0x02,0x00,
/*-- 文字: 港 --*/
/*-- 宋体9; 此字体下对应的点阵为：宽x高=12x12 --*/
/*-- 高度不是8的倍数，现调整为：宽度x高度=12x16 --*/
0x89,0x72,0x80,0x52,0xF2,0x5F,0x52,0x52,0xFF,0x52,0x92,0x00,0x07,0x00,0x00,0x00,
0x07,0x05,0x05,0x05,0x05,0x04,0x06,0x00,
/*-- 文字: 校 --*/
/*-- 宋体9; 此字体下对应的点阵为：宽x高=12x12 --*/
/*-- 高度不是8的倍数，现调整为：宽度x高度=12x16 --*/
0x44,0x24,0xFF,0x14,0x20,0x54,0x8D,0x06,0xEC,0x14,0x24,0x00,0x00,0x00,0x07,0x04,
0x04,0x04,0x02,0x01,0x02,0x04,0x04,0x00,
/*-- 文字: 区 --*/
/*-- 宋体9; 此字体下对应的点阵为：宽x高=12x12 --*/
/*-- 高度不是8的倍数，现调整为：宽度x高度=12x16 --*/
0xFF,0x01,0x01,0x09,0x91,0x61,0x51,0x8D,0x01,0x01,0x00,0x00,0x07,0x04,0x05,0x05,
0x04,0x04,0x04,0x04,0x05,0x04,0x04,0x00,
/*-- 文字: --*/
/*-- 宋体9; 此字体下对应的点阵为：宽x高=12x12 --*/
/*-- 高度不是8的倍数，现调整为：宽度x高度=12x16 --*/
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
/*-- 文字: --*/
/*-- 宋体9; 此字体下对应的点阵为：宽x高=12x12 --*/
/*-- 高度不是8的倍数，现调整为：宽度x高度=12x16 --*/
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
/*-- 文字: --*/
/*-- 宋体9; 此字体下对应的点阵为：宽x高=12x12 --*/
/*-- 高度不是8的倍数，现调整为：宽度x高度=12x16 --*/
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
/*-- 文字: --*/
/*-- 宋体9; 此字体下对应的点阵为：宽x高=12x12 --*/
/*-- 高度不是8的倍数，现调整为：宽度x高度=12x16 --*/
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
/*-- 文字: --*/
/*-- 宋体9; 此字体下对应的点阵为：宽x高=12x12 --*/
/*-- 高度不是8的倍数，现调整为：宽度x高度=12x16 --*/
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
/*-- 文字: --*/
/*-- 宋体9; 此字体下对应的点阵为：宽x高=12x12 --*/
/*-- 高度不是8的倍数，现调整为：宽度x高度=12x16 --*/
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
/*-- 文字: --*/
/*-- 宋体9; 此字体下对应的点阵为：宽x高=12x12 --*/
/*-- 高度不是8的倍数，现调整为：宽度x高度=12x16 --*/
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
};
/*--------------------------------------------
LCD_write_byte: 使用SPI接口写数据到LCD
输入参数：dt：写入的数据；
command ：写数据/命令选择；
编写日期：20080918
----------------------------------------------*/
void LCD_write_byte(unsigned char dt, unsigned char command)
{
unsigned char i;
sce0;
if(command==1)
{dc1; }
else {dc0;}
for(i=0;i<8;i++)
{
if(dt&0x80)
{sdin1;}
else
{sdin0;}
dt=dt<<1;
sclk0;
sclk1;
}
dc1;
sce1;
sdin1;
}
/*---------------------------------------
LCD_init: 3310LCD初始化
编写日期：20080918
----------------------------------------- */
void LCD_init(void)
{
res0;
delay_ms(1);
res1;
LCD_write_byte(0x21,0);//初始化Lcd,功能设定使用扩充指令
LCD_write_byte(0xd0,0);//设定液晶偏置电压
LCD_write_byte(0x20,0);//使用基本指令
LCD_write_byte(0x0C,0);//设定显示模式，正常显示
}
/*-------------------------------------------
LCD_set_XY: 设置LCD坐标函数
输入参数：X：0－83 Y：0－5
编写日期：20080918
---------------------------------------------*/
void LCD_set_XY(unsigned char X, unsigned char Y)
{
LCD_write_byte(0x40 | Y, 0);// column
LCD_write_byte(0x80 | X, 0);// row
}
/*------------------------------------------
LCD_clear: LCD清屏函数
编写日期：20080918
--------------------------------------------*/
void LCD_clear(void)
{
unsigned char t;
unsigned char k;
LCD_set_XY(0,0);
for(t=0;t<6;t++)
{
for(k=0;k<84;k++)
{
LCD_write_byte(0x00,1);
}
}
}
/*---------------------------------------------
LCD_write_shu: 显示8（宽）*16（高）点阵列数字字母符号等半角类
输入参数：c：显示的字符；
编写日期：20080918
-----------------------------------------------*/
void LCD_write_shu(unsigned char row, unsigned char page,unsigned char c) //row:列 page:页 dd:字符
{
unsigned char i;
LCD_set_XY(row*6, page);// 列，页
for(i=0; i<6;i++)
{
LCD_write_byte(zimu[c*12+i],1);
}
LCD_set_XY(row*6, page+1);// 列，页
for(i=6; i<12;i++)
{
LCD_write_byte(zimu[c*12+i],1);
}
}
/*---------------------------------------------
LCD_write_hanzi: 显示12（宽）*16（高）点阵列汉字等半角类
输入参数：c：显示的字符；
编写日期：20080918
-----------------------------------------------*/
void LCD_write_hanzi(unsigned char row, unsigned char page,unsigned char c) //row:列 page:页 dd:字符
{
unsigned char i;
LCD_set_XY(row*6, page);// 列，页
for(i=0; i<12;i++)
{
LCD_write_byte(hanzi[c*24+i],1);
}
LCD_set_XY(row*6, page+1);// 列，页
for(i=12; i<24;i++)
{
LCD_write_byte(hanzi[c*24+i],1);
}
}
main()
{
WDTCTL = WDTPW + WDTHOLD;
// DCOCTL=CALDCO_1MHZ;
// BCSCTL1=CALBC1_1MHZ;
P4DIR=0XFF;
res0;
delay_us(100);
res1;
LCD_init(); //初始化LCD模块
LCD_clear(); //清屏幕
LCD_write_shu(2,4,9);//j
LCD_write_shu(3,4,20);//u
LCD_write_shu(4,4,18);//s
LCD_write_shu(5,4,19);//t
LCD_write_shu(6,4,26);//.
LCD_write_shu(7,4,4);//e
LCD_write_shu(8,4,3);//d
LCD_write_shu(9,4,20);//u
LCD_write_shu(10,4,26);//.
LCD_write_shu(11,4,2);//c
LCD_write_shu(12,4,13);//n
int k;
while(1)
{
LCD_write_hanzi(0,0,7); //江
LCD_write_hanzi(2,0,8); //苏
LCD_write_hanzi(4,0,9); //科
LCD_write_hanzi(6,0,10); //技
LCD_write_hanzi(8,0,11); //大
LCD_write_hanzi(10,0,12); //学
delay_ms(1000);
for(k=1;k<19;k++)
{
LCD_write_hanzi(0,2,k);
LCD_write_hanzi(2,2,k+1); //张
LCD_write_hanzi(4,2,k+2); //江
LCD_write_hanzi(6,2,k+3); //港
LCD_write_hanzi(8,2,k+4); //校
LCD_write_hanzi(10,2,k+5); //区
LCD_write_hanzi(12,2,k+6);
delay_ms(1000);
}
LCD_write_hanzi(0,0,0);
LCD_write_hanzi(2,0,13); //张
LCD_write_hanzi(4,0,14); //江
LCD_write_hanzi(6,0,15); //港
LCD_write_hanzi(8,0,16); //校
LCD_write_hanzi(10,0,17); //区
delay_ms(1000);
}
}⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -