jincou.m

大量遗传算法实现程序

function  varargout = jincou( varargin )   
% this module edit the parameters .

%  February 2004
%  $Revision: 1.00 $  




if (nargin == 0) | isstruct( varargin{1} )     %  LAUNCH GUI
    
    if nargin == 1
        T_SimulationData = varargin{1} ;
    else
        T_SimulationData = [] ;
    end
    
 
    
% find if have the same figure, and close it .
OldFigure = findobj( 'type', 'figure', 'Tag', 'jincou' ) ;
if ishandle( OldFigure )
    close( OldFigure ) ;
end

% init the variables .
FigureWidth = 500 ;
FigureHeight = 400 ;
TabSpace = 10 ;
TextHeight = 20 ;
    % generate a new figure .
    FigureHandle = figure( 'Visible', 'off' ) ;
    set( FigureHandle, 'Units' , 'pixels', 'Position', [150 150 500 300], ...
        'Name', '紧凑型约束', ...
        'Tag', 'jincou', ...
        'FileName' , '' ,...
        'MenuBar' , 'none' ,...
        'NumberTitle' , 'off' ,...
        'Resize', 'off', ...
        'windowstyle', 'normal', ...
        'Visible', 'off' ) ;
    
    % generate the menu .
    generate_MenuContent( FigureHandle ) ;
    
    % generate the uicontrols .
    generate_FigureContent( FigureHandle ) ;
 
    % save the T_SimulationData .
    setappdata( FigureHandle, 'T_SimulationData', T_SimulationData ) ;
    
    
    % display the figure .
    movegui( FigureHandle, 'center' ) ;

%     set( findobj( FigureHandle, 'Type', 'uicontrol' ), 'Units', 'normalized' ) ;
    set( FigureHandle, 'Visible', 'on' ) ;

    % init the data .
    init_FigureContent( FigureHandle ) ;
    
    
    if nargout > 0
        varargout{1} = FigureHandle;
    end
    
elseif ischar(varargin{1}) % INVOKE NAMED SUBFUNCTION OR CALLBACK
    
    global  SET_DEBUG_VALUE_IN_SIMULATOR ;
    if isempty( SET_DEBUG_VALUE_IN_SIMULATOR ) | ~isnumeric( SET_DEBUG_VALUE_IN_SIMULATOR )
        SET_DEBUG_VALUE_IN_SIMULATOR = 0 ;
    else
    end
    
    if  SET_DEBUG_VALUE_IN_SIMULATOR == 1 ; 
        
        if (nargout)
            [varargout{1:nargout}] = feval(varargin{:}); % FEVAL switchyard
        else
            feval(varargin{:}); % FEVAL switchyard
        end             
        
    else        
        
        try
            if (nargout)
                [varargout{1:nargout}] = feval(varargin{:}); % FEVAL switchyard
            else
                feval(varargin{:}); % FEVAL switchyard
            end
        catch            
            disp(lasterr);
        end
        
    end

    
end


% ------------------------------------------------------------
function  generate_MenuContent( FigureHandle ) ;


% generate the file menu .
% ------------------------------------------------------------
MenuHandle = uimenu( 'Parent', FigureHandle, 'Label', '文件(&F)' ) ;

% define the parameters of the menus .
MenuLabel = { '打开(&O)'; '退出(&E)' } ;

% add Polygon at 2003.10.13 .
MenuTag = { 'MenuOpenResult'; 'MenuClose' } ;
MenuCallback = { ['T_Youhua( ''MenuOpenHistory_Callback'', gcbf)']; ...
 ['close all;'] } ;
SeparatorGroup = { 'off'; 'on' } ;

% generate the uimenus of file .
for num = 1: length( MenuTag )
% for num = 3
    UimenuHandle(num) = uimenu( MenuHandle ) ;
    set( UimenuHandle(num), 'Tag' , MenuTag{num} , ...
        'Callback' , MenuCallback{num} , ...
        'Label' , MenuLabel{num} , ...
        'Separator', SeparatorGroup{num} ) ;
end

% generate the parameter menu .
% ------------------------------------------------------------
MenuHandle = uimenu( FigureHandle, 'Label', '参数(&P)' ) ;

% define the parameters of the menus .
MenuLabel = { '导入(&L)'; '保存(&E)' } ;

% add Polygon at 2003.10.13 .
MenuTag = { 'MenuLoadData'; 'MenuSaveData' } ;
MenuCallback = { ...
    ['jincou( ''LoadData_Callback'', gcbo)']; ...
    ['jincou( ''SaveData_Callback'', gcbo)']; } ;
SeparatorGroup = { 'off'; 'on' } ;

% generate the uimenus of file .
for num = 1: length( MenuTag )
    UimenuHandle(num) = uimenu( MenuHandle ) ;
    set( UimenuHandle(num), 'Tag' , MenuTag{num} , ...
        'Callback' , MenuCallback{num} , ...
        'Label' , MenuLabel{num} , ...
        'Separator', SeparatorGroup{num} ) ;
end



% generate the parameter menu .
% ------------------------------------------------------------
MenuHandle = uimenu( FigureHandle, 'Label', '帮助(&H)', 'Enable', 'on' ) ;

% define the parameters of the menus .
MenuLabel = { '帮助(&P)'; '演示(&D)'; '关于(&A)';'时钟(&S)' } ;

% add Polygon at 2003.10.13 .
MenuTag = { 'MenuHelp'; 'MenuDemo'; 'MenuAbout';'shijian' } ;
MenuCallback = { ...
    ['T_Youhua( ''MenuHelp_Callback'', gcbo)']; ...
    ['T_Youhua( ''MenuDemo_Callback'', gcbo)']; ...
    ['T_Youhua( ''MenuAbout_Callback'', gcbo)'];...
    ['T_Youhua( ''shizhong'', gcbo)']} ;
SeparatorGroup = { 'off'; 'on'; 'on'; 'on' } ;

% generate the uimenus of file .
for num = 1: length( MenuTag )
    UimenuHandle(num) = uimenu( MenuHandle ) ;
    set( UimenuHandle(num), 'Tag' , MenuTag{num} , ...
        'Callback' , MenuCallback{num} , ...
        'Label' , MenuLabel{num} , ...
        'Separator', SeparatorGroup{num} ) ;
end





% ------------------------------------------------------------
function  generate_FigureContent( FigureHandle )
% generate the uicontrols .


% init the variables .
FigureWidth = 500 ;
FigureHeight = 400 ;
TabSpace = 10 ;
TextHeight = 22 ;
ChangeYPos = 30 ;


% reset the figure's size .
set( FigureHandle, 'Units', 'pixels', ...
    'Position', [150 150  FigureWidth  FigureHeight], ...
    'DoubleBuffer', 'on' ) ;

% generate the axes to plot lines .
AxesHandle = axes( 'Parent', FigureHandle, 'Units' , 'normalized' ,  ...
    'Position', [0 0 1 1], 'Visible', 'off', ...
    'Xlim', [0  FigureWidth], 'Ylim', [0  FigureHeight] ) ;

% get the color of the figure .
FigureColor = get( FigureHandle, 'Color' ) ;
% reset the default value of the uicontrols .
set(FigureHandle,'defaultuicontrolunits','normalized');
set(FigureHandle,'defaultuicontrolfontname','隶书');
set(FigureHandle,'defaultuicontrolBackgroundColor', FigureColor );
% define the first frame .
FrameXPos = TabSpace * 2 ;
FrameWidth = FigureWidth - TabSpace * 4  ;
FrameHeight = FigureHeight - TabSpace * 8 ;
FrameYPos = FigureHeight - FrameHeight - TabSpace * 2 ;
Frame1Position = [FrameXPos  FrameYPos  FrameWidth  FrameHeight] ;
% generate a frame .
TitleHandle = uicontrol(FigureHandle,'style','frame', 'Units','pixels',...
    'position',Frame1Position  );

TextXPos = Frame1Position(1) + TabSpace  ;
TextYPos = Frame1Position(2) + TabSpace ;
TextWidth = Frame1Position(3) - TabSpace * 2 ;
TextHeight = Frame1Position(4) - TabSpace * 2 ;
TextPosition = [TextXPos  TextYPos  TextWidth  TextHeight] ;
% subtitle:
TextHandle = uicontrol(FigureHandle, 'Style','text', 'Units','pixels',...
    'position',TextPosition, 'Horizontal','left',...
    'string', {['   C点  x轴上下界']}, 'fontsize',12 );
edit1 = uicontrol(FigureHandle, 'Style', 'edit', 'Units','pixels',...
        'position', [50 300 130 30], 'Horizontal','left', 'BackgroundColor', [1 1 1], ...
        'Tag','edit1' , ...
        'String', 0, 'FontSize',10, ...
        'Callback', ['jincou(''edit1_Callback'',gcbo)'] ) ;
TextXPos = Frame1Position(1) + TabSpace +200 ;
TextYPos = Frame1Position(2) + TabSpace ;
TextWidth = Frame1Position(3) - TabSpace * 2 ;
TextHeight = Frame1Position(4) - TabSpace * 2 ;
TextPosition = [TextXPos  TextYPos  TextWidth  TextHeight] ;
% subtitle:
TextHandle = uicontrol(FigureHandle, 'Style','text', 'Units','pixels',...
    'position',[TextXPos  TextYPos  200  TextHeight], 'Horizontal','left',...
    'string', {['   C点  y轴上下界']}, 'fontsize',12 );
edit2 = uicontrol(FigureHandle, 'Style', 'edit', 'Units','pixels',...
        'position', [250 300 130 30], 'Horizontal','left', 'BackgroundColor', [1 1 1], ...
        'Tag','edit2' , ...
        'String', 0, 'FontSize',10, ...
        'Callback', ['jincou(''edit2_Callback'',gcbo)'] ) ;
TextXPos = Frame1Position(1) + TabSpace  ;
TextYPos = Frame1Position(2) + TabSpace-100 ;
TextWidth = Frame1Position(3) - TabSpace * 2 ;