cycduart.h

移植到WLIT项目的redboot源代码

//=============================================================================
//
//      cycduart.h - Cyclone Diagnostics
//
//=============================================================================
//####COPYRIGHTBEGIN####
//                                                                          
// -------------------------------------------                              
// The contents of this file are subject to the Red Hat eCos Public License 
// Version 1.1 (the "License"); you may not use this file except in         
// compliance with the License.  You may obtain a copy of the License at    
// http://www.redhat.com/                                                   
//                                                                          
// Software distributed under the License is distributed on an "AS IS"      
// basis, WITHOUT WARRANTY OF ANY KIND, either express or implied.  See the 
// License for the specific language governing rights and limitations under 
// the License.                                                             
//                                                                          
// The Original Code is eCos - Embedded Configurable Operating System,      
// released September 30, 1998.                                             
//                                                                          
// The Initial Developer of the Original Code is Red Hat.                   
// Portions created by Red Hat are                                          
// Copyright (C) 2001 Red Hat, Inc.                             
// All Rights Reserved.                                                     
// -------------------------------------------                              
//                                                                          
//####COPYRIGHTEND####
//=============================================================================
//#####DESCRIPTIONBEGIN####
//
// Author(s):   Scott Coulter, Jeff Frazier, Eric Breeden
// Contributors:
// Date:        2001-01-25
// Purpose:     
// Description: 
//
//####DESCRIPTIONEND####
//
//===========================================================================*/


/* Control/status register offsets from base address */

#define RBR 0x00
#define THR 0x00
#define DLL 0x00
#define IER 0x01
#define DLM 0x01
#define IIR 0x02
#define FCR 0x02
#define LCR 0x03
#define MCR 0x04
#define LSR 0x05
#define MSR 0x06
#define SCR 0x07

/* 16550A Line Control Register */

#define LCR_5BITS 0x00
#define LCR_6BITS 0x01
#define LCR_7BITS 0x02
#define LCR_8BITS 0x03
#define LCR_NSB 0x04
#define LCR_PEN 0x08
#define LCR_EPS 0x10
#define LCR_SP 0x20
#define LCR_SB 0x40
#define LCR_DLAB 0x80

/* 16550A Line Status Register */

#define LSR_DR 0x01
#define LSR_OE 0x02
#define LSR_PE 0x04
#define LSR_FE 0x08
#define LSR_BI 0x10
#define LSR_THRE 0x20
#define LSR_TSRE 0x40
#define LSR_FERR 0x80

/* 16550A Interrupt Identification Register */

#define IIR_IP 0x01
#define IIR_ID 0x0e
#define IIR_RLS 0x06
#define IIR_RDA 0x04
#define IIR_THRE 0x02
#define IIR_MSTAT 0x00
#define IIR_TIMEOUT 0x0c

/* 16550A interrupt enable register bits */

#define IER_DAV 0x01
#define IER_TXE 0x02
#define IER_RLS 0x04
#define IER_MS 0x08

/* 16550A Modem control register */

#define MCR_DTR 0x01
#define MCR_RTS 0x02
#define MCR_OUT1 0x04
#define MCR_OUT2 0x08
#define MCR_LOOP 0x10

/* 16550A Modem Status Register */

#define MSR_DCTS 0x01
#define MSR_DDSR 0x02
#define MSR_TERI 0x04
#define MSR_DRLSD 0x08
#define MSR_CTS 0x10
#define MSR_DSR 0x20
#define MSR_RI 0x40
#define MSR_RLSD 0x80

/* (*) 16550A FIFO Control Register */

#define FCR_EN 0x01
#define FCR_RXCLR 0x02
#define FCR_TXCLR 0x04
#define FCR_DMA 0x08
#define FCR_RES1 0x10
#define FCR_RES2 0x20
#define FCR_RXTRIG_L 0x40
#define FCR_RXTRIG_H 0x80


#define CHAN1 0x8
#define CHAN2 0x0

#define DataIn		0x00		/* data input port  */
#define DataOut		0x00		/* data output port  */
#define BaudLsb		0x00		/* baud rate divisor least significant byte  */
#define BaudMsb		0x01		/* baud rate divisor most significant byte  */


/*
 * Enable receive and transmit FIFOs.
 *
 * FCR<7:6>     00      trigger level = 1 byte
 * FCR<5:4>     00      reserved
 * FCR<3>       0       mode 1 - interrupt on fifo threshold
 * FCR<2>       1       clear xmit fifo
 * FCR<1>       1       clear recv fifo
 * FCR<0>       1       turn on fifo mode
 */
#define FIFO_ENABLE 0x07
#define INT_ENABLE      (IER_RLS)   /* default interrupt mask */