flash.c

移植到WLIT项目的redboot源代码

    /* figure out how many blocks require erasure - round up using integer division */
	if (length % FLASH_BLOCK_SIZE)		/* non-multiple, round up */
		num_blocks = (length + FLASH_BLOCK_SIZE) / FLASH_BLOCK_SIZE;
	else								/* multiple number of blocks */
		num_blocks = length / FLASH_BLOCK_SIZE;

	if (eeprom_size == 0)
	{
		cmd_stat = E_NO_FLASH;
		return ERR;
	}

	/* Original */
	/* If it's already erased, don't bother */
	/*if (check_eeprom(addr, length) == OK)*/
	/*	return OK;*/
	/* check_bstat(int block_num); */

	if (flash_erase((void *)addr, num_blocks * FLASH_BLOCK_SIZE, (void **)&err_addr) != 0) {
		cmd_stat = E_EEPROM_FAIL;
		return ERR;
	}

	return OK;
}


/********************************************************/
/* CHECK PROGRAM OR LOCK STATUS							*/
/*														*/
/* Check the status of program or lock operations		*/
/* using the Status Register of the Flash				*/
/*														*/
/* Returns: 	OK		  - Write successful			*/
/*		VPP_LOW_DETECT	  - Vpp low detected			*/
/*		PROGRAM_LOCK_ERROR  - Write error				*/
/*		UNKNOWN_ERR - Unknown error condition			*/
/*														*/
/********************************************************/
#if 0
int check_program_lock(volatile FLASH_TYPE *flash)
{
    FLASH_TYPE stat;
    flash = FLASH_P2V(flash);
    *flash = READ_STAT_REG;
    stat = *flash;

    /* poll and wait for Write State Machine Ready */
    while (!(stat & WSM_READY))
    	stat = *flash;

    /* now check completion status */
    if (stat & VPP_LOW_DETECT)
    {
		*flash = CLEAR_STAT_REG;
		return VPP_LOW_DETECT;
    }

    if (stat & PROGRAM_LOCK_ERROR)
    {
		*flash = CLEAR_STAT_REG;
		return PROGRAM_LOCK_ERROR;
    }

    if ((stat & ALL_FLASH_STATUS) == (WSM_READY | PROGRAM_LOCK_SUCCESS))
    {
		*flash = CLEAR_STAT_REG;
		return OK;
    }
    else
    {
		*flash = CLEAR_STAT_REG;
		return UNKNOWN_ERR;
    }
}
#endif

/********************************************************/
/* WRITE EEPROM                          				*/
/*                                     					*/
/* returns OK if successful; otherwise returns ERROR    */
/* and sets cmd_stat to an error code				 	*/
/*														*/
/********************************************************/
int
write_eeprom(ADDR start_addr, const void *data_arg, int data_size)
{
    void *err_addr;

	if (flash_program(start_addr, data_arg, data_size, &err_addr) != 0) {
		cmd_stat = E_EEPROM_FAIL;
		return ERR;
	}
	return OK;
}


/*****************************************************************************
*
* flash_test - System Flash ROM diagnostics
*
* A destructive Flash ROM Read/Write test.  Note that the area of Flash
* which is tested changes based on whether the diagnostic is being invoked
* from the System code or from the Factory code (can't write over MON960).
*
* This test basically does a Longword Address test to the Flash area.
*
*/
void flash_test(void)
{

    ADDR start_addr = (ADDR)flash_addr;	/* Original */

    int i;
    unsigned long *f_ptr = (unsigned long *)flash_addr;
    int bytes_written = 0;
    unsigned long flash_data;
    char answer[20];

/* 10/31/00 */
	int status;

#if 0
	printf ("Disabling Instruction Cache... ");
	_disableICache();  /* disable instruction cache */
	printf ("Done\n\n");

	/* switch the MMU over to use RAM-based page table entries */
	printf ("Switching MMU to RAM-based page table... ");
	_switchMMUpageTables();
	printf ("Done\n\n");
#endif


/* 10/31/00 */
/*
	check_lock_bit_status(); 

	printf ("Setting Block Lock Bits... \n");
    printf("Do you wish to continue? (y/n)\n");
    sgets(answer);
    printf("\n");
    if ((answer[0] != 'y') && (answer[0] != 'Y'))
   		return; 
	if( (status = set_all_lock_bits() ) == OK )
        printf("Done!\n");
	else
	{
        printf("Error!\n");
		printf( "error status = 0x%x\n", status );
	}

	check_lock_bit_status(); 

    printf ("\nClearing Block Lock Bits... \n");
    printf("Do you wish to continue? (y/n)\n");
    sgets(answer);
    printf("\n");
    if ((answer[0] != 'y') && (answer[0] != 'Y'))
   		return; 
	if( ( status=clear_all_lock_bits(NO_ADDR) ) == OK )
        printf("Done!\n");
	else
	{
        printf("Error!\n");
		printf( "error status = 0x%x\n", status );
	}

	check_lock_bit_status();
*/
/* 10/31/00 */


	init_eeprom();

    printf("***********************************\n");
    printf("***           WARNING           ***\n");
    printf("*** This test is destructive to ***\n");
    printf("*** all contents of the FLASH!  ***\n");
    printf("***********************************\n");

    printf("\nDo you wish to continue? (y/n)\n");
    sgets(answer);
    printf("\n\n");
    if ((answer[0] != 'y') && (answer[0] != 'Y'))
   		return; 


    printf ("FLASH begins at 0x%X\n", flash_addr);
    printf ("Total FLASH size = 0x%X\n\n", eeprom_size);

    printf ("Checking FLASH ...\n");
    if (check_eeprom(NO_ADDR, 0) == OK)
        printf("FLASH is erased\n\n");
    else
    {
        printf("FLASH is programmed between 0x%X and 0x%X\n\n",
                eeprom_prog_first, eeprom_prog_last);
    }


    printf ("\nClearing Block Lock Bits... \n");
	if(clear_all_lock_bits(NO_ADDR)==OK)
        printf("Done!\n\n");
	else
        printf("Error!\n\n");
	
/*	check_lock_bit_status(); */

    printf ("Erasing FLASH...\n");
    if (erase_eeprom(NO_ADDR, 0) != OK)
        printf("Error on erase_eeprom()\n\n");
    else
        printf("Done Erasing FLASH!\n\n");
 
    (ADDR)flash_addr =  FLASH_BLK4_BASE_ADDR;
	(ADDR)start_addr = (ADDR)flash_addr;

    printf ("Writing Longword Data to FLASH...\n");
 
    /* write to all of available Flash ROM.  Don't do this thousands of times
	   since the Flash has only 100,000 write cycles in its lifespan */

    while (bytes_written < (eeprom_size - RESERVED_AREA_SIZE))
    {
		flash_data = (unsigned long)start_addr;
    	for (i=0; i<TEST_BUF_LONGS; i++)
		{
            flash_buffer[i] = flash_data;	/* put address in buffer */
			flash_data += 4;				/* increment address     */
		}
        if (write_eeprom (start_addr, (void *)flash_buffer,
				 TEST_BUF_CHARS) != OK)
        {
            printf("Error on write_eeprom()\n");
            goto finish;
        }
        start_addr = (unsigned long)start_addr + TEST_BUF_CHARS;
        bytes_written += TEST_BUF_CHARS;
    }

    printf ("Write Complete, Verifying Data...\n");
    bytes_written = 0;
 
   (ADDR)flash_addr = FLASH_BLK4_BASE_ADDR;
    f_ptr = (unsigned long *)flash_addr;
    
	while (bytes_written < (eeprom_size - RESERVED_AREA_SIZE))
    {
        if (*f_ptr != (unsigned long)f_ptr)
        {
            printf ("Data verification error at 0x%X\n",
                        (unsigned long)f_ptr);
            printf ("Expected 0x%X Got 0x%X\n", (unsigned long)f_ptr, *f_ptr);
            goto finish;
        }
        f_ptr++;
        bytes_written += 4;
    }
    printf ("Done Verifying Longword Data!\n\n");


    printf ("Checking FLASH...\n");
    if (check_eeprom(NO_ADDR, 0) == OK)
        printf("FLASH is erased\n\n");
    else
    {
        printf("FLASH is programmed between 0x%X and 0x%X\n\n",
                eeprom_prog_first, eeprom_prog_last);
    }


    printf ("Erasing FLASH...\n");
    if (erase_eeprom(NO_ADDR, 0) != OK)
        printf("Error on erase_eeprom()\n\n");
    else
        printf("Done Erasing FLASH!\n\n");


    printf ("Checking FLASH...\n");
    if (check_eeprom(NO_ADDR, 0) == OK)
        printf("FLASH is erased\n\n");
    else
    {
        printf("FLASH is programmed between 0x%X and 0x%X\n\n",
                eeprom_prog_first, eeprom_prog_last);
    }


    /* reinitialize variables */
    bytes_written = 0;
 
    (ADDR)flash_addr = FLASH_BLK4_BASE_ADDR;

	start_addr = (ADDR)flash_addr;
    f_ptr = (unsigned long *)flash_addr;

    printf ("Writing Inverted Longword Data to FLASH...\n");
 
    /* write to all of available Flash ROM.  Don't do this thousands of times
	   since the Flash has only 100,000 write cycles in its lifespan */

    while (bytes_written < (eeprom_size - RESERVED_AREA_SIZE))
    {
		flash_data = (unsigned long)start_addr;
    	for (i=0; i<TEST_BUF_LONGS; i++)
		{
            flash_buffer[i] = ~flash_data;	/* put address BAR in buffer */
			flash_data += 4;			/* increment address     */
		}
        if (write_eeprom (start_addr, (void *)flash_buffer,
				 TEST_BUF_CHARS) != OK)
        {
            printf("Error on write_eeprom()\n");
            goto finish;
        }
        start_addr = (unsigned long)start_addr + TEST_BUF_CHARS;
        bytes_written += TEST_BUF_CHARS;
    }
 
    printf ("Write Complete, Verifying Data...\n");
    bytes_written = 0;
 
    while (bytes_written < (eeprom_size - RESERVED_AREA_SIZE))
    {
        if (*f_ptr != (~(unsigned long)f_ptr))
        {
            printf ("Data verification error at 0x%X\n",
                        (unsigned long)f_ptr);
            printf ("Expected 0x%X Got 0x%X\n", (~(unsigned long)f_ptr), *f_ptr);
            goto finish;
        }
        f_ptr++;
        bytes_written += 4;
    }
    printf ("Done Verifying Inverted Longword Data!\n\n");


    printf ("Checking FLASH...\n");
    if (check_eeprom(NO_ADDR, 0) == OK)
        printf("FLASH is erased\n\n");
    else
    {
        printf("FLASH is programmed between 0x%X and 0x%X\n\n",
                eeprom_prog_first, eeprom_prog_last);
    }


    printf ("Erasing FLASH...\n");
    if (erase_eeprom(NO_ADDR, 0) != OK)
        printf("Error on erase_eeprom()\n\n");
    else
        printf("Done Erasing FLASH!\n\n");


    printf ("Checking FLASH...\n");
    if (check_eeprom(NO_ADDR, 0) == OK)
        printf("FLASH is erased\n\n");
    else
    {
        printf("FLASH is programmed between 0x%X and 0x%X\n\n",
                eeprom_prog_first, eeprom_prog_last);
    }


/* 11/02/00 */
	printf ("Setting Lock Bits for Blocks 0-3... \n");
	if( (status = set_all_lock_bits() ) == OK )
	{
        printf("Done!\n");
	}
	else
	{
        printf("Error!\n");
		printf( "error status = 0x%x\n", status );
		//		check_lock_bit_status();
	}
/*
	printf ("Setting Lock Bits for Blocks 0-3... \n");
	if(set_all_lock_bits()==OK)
	{
        printf("Done!\n\n");
	}
	else
	{
        printf("Error!\n\n");
		check_lock_bit_status();
	}
*/
/* 11/02/00 */


finish:
	_flushICache();
#if 0
	_enableICache();
#endif

    printf ("\nHit <CR> to Continue...\n");
    (void)hexIn();
    return;

}