diag.cxx

移植到WLIT项目的redboot源代码

/*========================================================================
//
//      diag.c
//
//      Infrastructure diagnostic output code
//
//========================================================================
//####COPYRIGHTBEGIN####
//                                                                          
// -------------------------------------------                              
// The contents of this file are subject to the Red Hat eCos Public License 
// Version 1.1 (the "License"); you may not use this file except in         
// compliance with the License.  You may obtain a copy of the License at    
// http://www.redhat.com/                                                   
//                                                                          
// Software distributed under the License is distributed on an "AS IS"      
// basis, WITHOUT WARRANTY OF ANY KIND, either express or implied.  See the 
// License for the specific language governing rights and limitations under 
// the License.                                                             
//                                                                          
// The Original Code is eCos - Embedded Configurable Operating System,      
// released September 30, 1998.                                             
//                                                                          
// The Initial Developer of the Original Code is Red Hat.                   
// Portions created by Red Hat are                                          
// Copyright (C) 1998, 1999, 2000 Red Hat, Inc.                             
// All Rights Reserved.                                                     
// -------------------------------------------                              
//                                                                          
//####COPYRIGHTEND####
//========================================================================
//#####DESCRIPTIONBEGIN####
//
// Author(s):    nickg
// Contributors: nickg
// Date:         1999-02-22
// Purpose:      Infrastructure diagnostic output
// Description:  Implementations of infrastructure diagnostic routines.
//
//####DESCRIPTIONEND####
//
//======================================================================*/

#include <pkgconf/system.h>
#include <pkgconf/hal.h>
#include <pkgconf/infra.h>

#include <cyg/infra/cyg_type.h>         // base types

#include <cyg/infra/diag.h>             // HAL polled output
#include <cyg/hal/hal_arch.h>           // architectural stuff for...
#include <cyg/hal/hal_intr.h>           // interrupt control
#include <cyg/hal/hal_diag.h>           // diagnostic output routines

#ifdef CYGDBG_INFRA_DIAG_PRINTF_USE_VARARG

#include <stdarg.h>

#endif

#ifdef CYGDBG_INFRA_DIAG_USE_DEVICE
#include <cyg/io/io_diag.h>
#endif

/*----------------------------------------------------------------------*/

externC void diag_write_num(
    cyg_uint32  n,              /* number to write              */
    cyg_ucount8 base,           /* radix to write to            */
    cyg_ucount8 sign,           /* sign, '-' if -ve, '+' if +ve */
    cyg_bool    pfzero,         /* prefix with zero ?           */
    cyg_ucount8 width           /* min width of number          */
    );

class Cyg_dummy_diag_init_class {
public:
    Cyg_dummy_diag_init_class() {
#ifdef CYGDBG_INFRA_DIAG_USE_DEVICE
        diag_device_init(); 
#else
        HAL_DIAG_INIT();
#endif
    }
};

#ifdef CYGDBG_INFRA_DIAG_USE_DEVICE

// Initialize after IO devices.
static Cyg_dummy_diag_init_class cyg_dummy_diag_init_obj 
                                      CYGBLD_ATTRIB_INIT_AFTER(CYG_INIT_IO);

/*----------------------------------------------------------------------*/
/* Write single char to output                                          */

externC void diag_write_char(char c)
{
    diag_device_write_char(c);
}

#else

// Initialize after HAL.
static Cyg_dummy_diag_init_class cyg_dummy_diag_init_obj 
                                      CYGBLD_ATTRIB_INIT_AFTER(CYG_INIT_HAL);

/*----------------------------------------------------------------------*/
/* Write single char to output                                          */

#define PREFIX()
//#define PREFIX() HAL_DIAG_WRITE_CHAR(0x0F)

externC void diag_write_char(char c)
{    
    /* Translate LF into CRLF */
    
    if( c == '\n' )
    {
        PREFIX();
        HAL_DIAG_WRITE_CHAR('\r');        
    }

    PREFIX();
    HAL_DIAG_WRITE_CHAR(c);
}
#endif

/*----------------------------------------------------------------------*/
/* Initialize. Call to pull in diag initializing constructor            */

externC void diag_init(void)
{
}

/*----------------------------------------------------------------------*/
/* Write zero terminated string                                         */
  
externC void diag_write_string(const char *psz)
{
    while( *psz ) diag_write_char( *psz++ );
}

/*----------------------------------------------------------------------*/
/* Write decimal value                                                  */

externC void diag_write_dec( cyg_int32 n)
{
    cyg_ucount8 sign;

    if( n < 0 ) n = -n, sign = '-';
    else sign = '+';
    
    diag_write_num( n, 10, sign, false, 0);
}

/*----------------------------------------------------------------------*/
/* Write hexadecimal value                                              */

externC void diag_write_hex( cyg_uint32 n)
{
    diag_write_num( n, 16, '+', false, 0);
}    

/*----------------------------------------------------------------------*/
/* Generic number writing function                                      */
/* The parameters determine what radix is used, the signed-ness of the  */
/* number, its minimum width and whether it is zero or space filled on  */
/* the left.                                                            */

externC void diag_write_long_num(
    cyg_uint64  n,              /* number to write              */
    cyg_ucount8 base,           /* radix to write to            */
    cyg_ucount8 sign,           /* sign, '-' if -ve, '+' if +ve */
    cyg_bool    pfzero,         /* prefix with zero ?           */
    cyg_ucount8 width           /* min width of number          */
    )
{
    char buf[32];
    cyg_count8 bpos;
    char bufinit = pfzero?'0':' ';
    char *digits = "0123456789ABCDEF";

    /* init buffer to padding char: space or zero */
    for( bpos = 0; bpos < (cyg_count8)sizeof(buf); bpos++ ) buf[bpos] = bufinit;

    /* Set pos to start */
    bpos = 0;

    /* construct digits into buffer in reverse order */
    if( n == 0 ) buf[bpos++] = '0';
    else while( n != 0 )
    {
        cyg_ucount8 d = n % base;
        buf[bpos++] = digits[d];
        n /= base;
    }

    /* set pos to width if less. */
    if( (cyg_count8)width > bpos ) bpos = width;

    /* set sign if negative. */
    if( sign == '-' )
    {
        if( buf[bpos-1] == bufinit ) bpos--;
        buf[bpos] = sign;
    }
    else bpos--;

    /* Now write it out in correct order. */
    while( bpos >= 0 )
        diag_write_char(buf[bpos--]);
}

externC void diag_write_num(
    cyg_uint32  n,              /* number to write              */
    cyg_ucount8 base,           /* radix to write to            */
    cyg_ucount8 sign,           /* sign, '-' if -ve, '+' if +ve */
    cyg_bool    pfzero,         /* prefix with zero ?           */
    cyg_ucount8 width           /* min width of number          */
    )
{
    diag_write_long_num((long long)n, base, sign, pfzero, width);
}

/*----------------------------------------------------------------------*/
/* perform some simple sanity checks on a string to ensure that it      */
/* consists of printable characters and is of reasonable length.        */

static cyg_bool diag_check_string( const char *str )
{
    cyg_bool result = true;
    const char *s;

    if( str == NULL ) return false;
    
    for( s = str ; result && *s ; s++ )
    {
        char c = *s;

        /* Check for a reasonable length string. */
        
        if( s-str > 256 ) result = false;

        /* We only really support CR and NL at present. If we want to
         * use tabs or other special chars, this test will have to be
         * expanded.
         */
        
        if( c == '\n' || c == '\r' )
            continue;

        /* Check for printable chars. This assumes ASCII */
        
        if( c < ' ' || c > '~' )
            result = false;

    }

    return result;
}

/*----------------------------------------------------------------------*/

externC void diag_vprintf( const char *fmt, CYG_ADDRWORD *args)
{
    if( !diag_check_string(fmt) )
    {