configure

移植到WLIT项目的redboot源代码

  
  if test "${MSVC}" = "yes" ; then
    cyg_ac_tcl_version=80
  else
    if test "${ac_cv_cygwin}" = "yes" ; then
      cyg_ac_tcl_version=80
    else
      cyg_ac_tcl_version=""
    fi
  fi

fi

echo "$ac_t""${cyg_ac_tcl_version}" 1>&6


# Check whether --with-tcl or --without-tcl was given.
if test "${with_tcl+set}" = set; then
  withval="$with_tcl"
  :
fi

# Check whether --with-tcl or --without-tcl was given.
if test "${with_tcl+set}" = set; then
  withval="$with_tcl"
  :
fi


echo $ac_n "checking for Tcl installation""... $ac_c" 1>&6
echo "configure:1460: checking for Tcl installation" >&5
# Check whether --with-tcl or --without-tcl was given.
if test "${with_tcl+set}" = set; then
  withval="$with_tcl"
  
  cyg_ac_tcl_incdir=${with_tcl}/include
  cyg_ac_tcl_libdir=${with_tcl}/lib

else
  
  if test "${with_tcl_header}" = "no"; then
    cyg_ac_tcl_incdir=${prefix}/include
  else
    with_tcl=yes
    cyg_ac_tcl_incdir=${with_tcl_header}/include
  fi

  if test "${with_tcl_lib}" = "no"; then
    cyg_ac_tcl_libdir=${prefix}/lib
  else
    with_tcl=yes
    cyg_ac_tcl_libdir=${with_tcl_lib}/lib
  fi

fi

echo "$ac_t""${cyg_ac_tcl_libdir}" 1>&6

if test \! -r ${cyg_ac_tcl_incdir}/tcl.h ; then
  { echo "configure: error: unable to locate Tcl header file tcl.h" 1>&2; exit 1; }
fi

if test "${MSVC}" = "yes" ; then
  cyg_ac_tcl_libs="tcl${cyg_ac_tcl_version}.lib"
  
    
    

    if test "${MSVC}" = "yes" ; then
      cyg_ac_tcl_incdir=`cygpath -w ${cyg_ac_tcl_incdir} | tr \\\\\\\\ /`
    fi

  
    
    

    if test "${MSVC}" = "yes" ; then
      cyg_ac_tcl_libdir=`cygpath -w ${cyg_ac_tcl_libdir} | tr \\\\\\\\ /`
    fi

else
  if test \! -r ${cyg_ac_tcl_libdir}/tclConfig.sh ; then
    { echo "configure: error: unable to locate Tcl config file tclConfig.sh" 1>&2; exit 1; }
  else
    . ${cyg_ac_tcl_libdir}/tclConfig.sh
    cyg_ac_tcl_libs="-ltcl${cyg_ac_tcl_version} ${TCL_LIBS}"
  fi
fi








echo $ac_n "checking for host-side infrastructure""... $ac_c" 1>&6
echo "configure:1527: checking for host-side infrastructure" >&5
cyg_ac_infra_incdir=../../../../infra
cyg_ac_infra_libdir=../../../../infra
if test "${MSVC}" = "yes" ; then
 cyg_ac_infra_libraries=cyginfra.lib
else
 cyg_ac_infra_libraries=cyginfra
fi
if test \! -d ${cyg_ac_infra_incdir} ; then
  { echo "configure: error: unable to locate the infrastructure build directory" 1>&2; exit 1; }
fi

    
    

    if test "${MSVC}" = "yes" ; then
      cyg_ac_infra_incdir=`cygpath -w ${cyg_ac_infra_incdir} | tr \\\\\\\\ /`
    fi


    
    

    if test "${MSVC}" = "yes" ; then
      cyg_ac_infra_libdir=`cygpath -w ${cyg_ac_infra_libdir} | tr \\\\\\\\ /`
    fi




echo "$ac_t""-I${cyg_ac_infra_incdir} -L${cyg_ac_infra_libdir} libraries ${cyg_ac_infra_libraries}" 1>&6

echo $ac_n "checking for libcdl""... $ac_c" 1>&6
echo "configure:1560: checking for libcdl" >&5
cyg_ac_cdl_incdir=${srcdir}/../../../../libcdl
cyg_ac_cdl_libdir=../../../../libcdl
if test "${MSVC}" = "yes" ; then
  cyg_ac_cdl_libraries=cdl.lib
else
  cyg_ac_cdl_libraries=cdl
fi
if test \! -d ${cyg_ac_cdl_incdir} ; then
  { echo "configure: error: unable to locate the libcdl source directory" 1>&2; exit 1; }
fi
if test \! -f ${cyg_ac_cdl_incdir}/cdl.hxx ; then
  { echo "configure: error: unable to locate the libcdl header file cdl.hxx" 1>&2; exit 1; }
fi
if test \! -d ${cyg_ac_cdl_libdir} ; then
  { echo "configure: error: unable to locate the libcdl build directory" 1>&2; exit 1; }
fi

    
    

    if test "${MSVC}" = "yes" ; then
      cyg_ac_cdl_incdir=`cygpath -w ${cyg_ac_cdl_incdir} | tr \\\\\\\\ /`
    fi


    
    

    if test "${MSVC}" = "yes" ; then
      cyg_ac_cdl_libdir=`cygpath -w ${cyg_ac_cdl_libdir} | tr \\\\\\\\ /`
    fi




echo "$ac_t""-I${cyg_ac_cdl_incdir} -L${cyg_ac_cdl_libdir} libraries ${cyg_ac_cdl_libraries}" 1>&6

win_srcdir=${srcdir}

    
    

    if test "${MSVC}" = "yes" ; then
      win_srcdir=`cygpath -w ${win_srcdir} | tr \\\\\\\\ /`
    fi



trap '' 1 2 15
cat > confcache <<\EOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
# scripts and configure runs.  It is not useful on other systems.
# If it contains results you don't want to keep, you may remove or edit it.
#
# By default, configure uses ./config.cache as the cache file,
# creating it if it does not exist already.  You can give configure
# the --cache-file=FILE option to use a different cache file; that is
# what configure does when it calls configure scripts in
# subdirectories, so they share the cache.
# Giving --cache-file=/dev/null disables caching, for debugging configure.
# config.status only pays attention to the cache file if you give it the
# --recheck option to rerun configure.
#
EOF
# The following way of writing the cache mishandles newlines in values,
# but we know of no workaround that is simple, portable, and efficient.
# So, don't put newlines in cache variables' values.
# Ultrix sh set writes to stderr and can't be redirected directly,
# and sets the high bit in the cache file unless we assign to the vars.
(set) 2>&1 |
  case `(ac_space=' '; set | grep ac_space) 2>&1` in
  *ac_space=\ *)
    # `set' does not quote correctly, so add quotes (double-quote substitution
    # turns \\\\ into \\, and sed turns \\ into \).
    sed -n \
      -e "s/'/'\\\\''/g" \
      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
    ;;
  *)
    # `set' quotes correctly as required by POSIX, so do not add quotes.
    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
    ;;
  esac >> confcache
if cmp -s $cache_file confcache; then
  :
else
  if test -w $cache_file; then
    echo "updating cache $cache_file"
    cat confcache > $cache_file
  else
    echo "not updating unwritable cache $cache_file"
  fi
fi
rm -f confcache

trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15

test "x$prefix" = xNONE && prefix=$ac_default_prefix
# Let make expand exec_prefix.
test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'

# Any assignment to VPATH causes Sun make to only execute
# the first set of double-colon rules, so remove it if not needed.
# If there is a colon in the path, we need to keep it.
if test "x$srcdir" = x.; then
  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
fi

trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15

# Transform confdefs.h into DEFS.
# Protect against shell expansion while executing Makefile rules.
# Protect against Makefile macro expansion.
cat > conftest.defs <<\EOF
s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
s%\[%\\&%g
s%\]%\\&%g
s%\$%$$%g
EOF
DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
rm -f conftest.defs


# Without the "./", some shells look in PATH for config.status.
: ${CONFIG_STATUS=./config.status}

echo creating $CONFIG_STATUS
rm -f $CONFIG_STATUS
cat > $CONFIG_STATUS <<EOF
#! /bin/sh
# Generated automatically by configure.
# Run this file to recreate the current configuration.
# This directory was configured as follows,
# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
#
# $0 $ac_configure_args
#
# Compiler output produced by configure, useful for debugging
# configure, is in ./config.log if it exists.

ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
for ac_option
do
  case "\$ac_option" in
  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
    echo "$CONFIG_STATUS generated by autoconf version 2.13"
    exit 0 ;;
  -help | --help | --hel | --he | --h)
    echo "\$ac_cs_usage"; exit 0 ;;
  *) echo "\$ac_cs_usage"; exit 1 ;;
  esac
done

ac_given_srcdir=$srcdir
ac_given_INSTALL="$INSTALL"

trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
EOF
cat >> $CONFIG_STATUS <<EOF

# Protect against being on the right side of a sed subst in config.status.
sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
 s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
$ac_vpsub
$extrasub
s%@SHELL@%$SHELL%g
s%@CFLAGS@%$CFLAGS%g
s%@CPPFLAGS@%$CPPFLAGS%g
s%@CXXFLAGS@%$CXXFLAGS%g
s%@FFLAGS@%$FFLAGS%g
s%@DEFS@%$DEFS%g
s%@LDFLAGS@%$LDFLAGS%g
s%@LIBS@%$LIBS%g
s%@exec_prefix@%$exec_prefix%g
s%@prefix@%$prefix%g
s%@program_transform_name@%$program_transform_name%g
s%@bindir@%$bindir%g
s%@sbindir@%$sbindir%g
s%@libexecdir@%$libexecdir%g
s%@datadir@%$datadir%g
s%@sysconfdir@%$sysconfdir%g
s%@sharedstatedir@%$sharedstatedir%g
s%@localstatedir@%$localstatedir%g
s%@libdir@%$libdir%g
s%@includedir@%$includedir%g
s%@oldincludedir@%$oldincludedir%g
s%@infodir@%$infodir%g
s%@mandir@%$mandir%g
s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
s%@INSTALL_DATA@%$INSTALL_DATA%g
s%@PACKAGE@%$PACKAGE%g
s%@VERSION@%$VERSION%g
s%@ACLOCAL@%$ACLOCAL%g
s%@AUTOCONF@%$AUTOCONF%g
s%@AUTOMAKE@%$AUTOMAKE%g
s%@AUTOHEADER@%$AUTOHEADER%g
s%@MAKEINFO@%$MAKEINFO%g
s%@SET_MAKE@%$SET_MAKE%g
s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
s%@MAINT@%$MAINT%g
s%@host@%$host%g
s%@host_alias@%$host_alias%g
s%@host_cpu@%$host_cpu%g
s%@host_vendor@%$host_vendor%g
s%@host_os@%$host_os%g
s%@CC@%$CC%g
s%@CXX@%$CXX%g
s%@OBJEXT@%$OBJEXT%g
s%@EXEEXT@%$EXEEXT%g
s%@MSVC_TRUE@%$MSVC_TRUE%g
s%@MSVC_FALSE@%$MSVC_FALSE%g
s%@cyg_ac_tcl_version@%$cyg_ac_tcl_version%g
s%@cyg_ac_tcl_incdir@%$cyg_ac_tcl_incdir%g
s%@cyg_ac_tcl_libdir@%$cyg_ac_tcl_libdir%g
s%@cyg_ac_tcl_libs@%$cyg_ac_tcl_libs%g
s%@cyg_ac_tk_libs@%$cyg_ac_tk_libs%g
s%@cyg_ac_infra_incdir@%$cyg_ac_infra_incdir%g
s%@cyg_ac_infra_libdir@%$cyg_ac_infra_libdir%g
s%@cyg_ac_infra_libraries@%$cyg_ac_infra_libraries%g
s%@cyg_ac_cdl_incdir@%$cyg_ac_cdl_incdir%g
s%@cyg_ac_cdl_libdir@%$cyg_ac_cdl_libdir%g
s%@cyg_ac_cdl_libraries@%$cyg_ac_cdl_libraries%g
s%@win_srcdir@%$win_srcdir%g

CEOF
EOF

cat >> $CONFIG_STATUS <<\EOF

# Split the substitutions into bite-sized pieces for seds with
# small command number limits, like on Digital OSF/1 and HP-UX.
ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
ac_file=1 # Number of current file.
ac_beg=1 # First line for current file.
ac_end=$ac_max_sed_cmds # Line after last line for current file.
ac_more_lines=:
ac_sed_cmds=""
while $ac_more_lines; do
  if test $ac_beg -gt 1; then
    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
  else
    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
  fi
  if test ! -s conftest.s$ac_file; then
    ac_more_lines=false
    rm -f conftest.s$ac_file
  else
    if test -z "$ac_sed_cmds"; then
      ac_sed_cmds="sed -f conftest.s$ac_file"
    else
      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
    fi
    ac_file=`expr $ac_file + 1`
    ac_beg=$ac_end
    ac_end=`expr $ac_end + $ac_max_sed_cmds`
  fi
done
if test -z "$ac_sed_cmds"; then
  ac_sed_cmds=cat
fi
EOF

cat >> $CONFIG_STATUS <<EOF

CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
EOF
cat >> $CONFIG_STATUS <<\EOF
for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
  case "$ac_file" in
  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
  *) ac_file_in="${ac_file}.in" ;;
  esac

  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.

  # Remove last slash and all that follows it.  Not all systems have dirname.
  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
    # The file is in a subdirectory.
    test ! -d "$ac_dir" && mkdir "$ac_dir"
    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
    # A "../" for each directory in $ac_dir_suffix.
    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
  else
    ac_dir_suffix= ac_dots=
  fi

  case "$ac_given_srcdir" in
  .)  srcdir=.
      if test -z "$ac_dots"; then top_srcdir=.
      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
  *) # Relative path.
    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
    top_srcdir="$ac_dots$ac_given_srcdir" ;;
  esac

  case "$ac_given_INSTALL" in
  [/$]*) INSTALL="$ac_given_INSTALL" ;;
  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
  esac

  echo creating "$ac_file"
  rm -f "$ac_file"
  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
  case "$ac_file" in
  *Makefile*) ac_comsub="1i\\
# $configure_input" ;;
  *) ac_comsub= ;;
  esac

  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
  sed -e "$ac_comsub
s%@configure_input@%$configure_input%g
s%@srcdir@%$srcdir%g
s%@top_srcdir@%$top_srcdir%g
s%@INSTALL@%$INSTALL%g
" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
fi; done
rm -f conftest.s*

EOF
cat >> $CONFIG_STATUS <<EOF

EOF
cat >> $CONFIG_STATUS <<\EOF

exit 0
EOF
chmod +x $CONFIG_STATUS
rm -fr confdefs* $ac_clean_files
test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1