rtx_ex2.opt

keil c 破解

### uVision2 Project, (C) Keil Software
### Do not modify !

 cExt (*.c)
 aExt (*.a*; *.src)
 oExt (*.obj)
 lExt (*.lib)
 tExt (*.txt)
 pExt (*.plm)
 CppX (*.cpp)
 DaveTm { 0,0,0,0,0,0,0,0 }

Target (RTX51 Tiny Ex2), 0x0000 // Tools: 'MCS-51'
GRPOPT 1,(Source Files),1,0,0

OPTFFF 1,1,1,16777216,0,35,58,0,<.\RTX_EX2.C><RTX_EX2.C> { 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,110,0,0,0,115,0,0,0,126,4,0,0,155,2,0,0 }
OPTFFF 1,2,5,2,0,1,1,0,<.\ABSTRACT.TXT><ABSTRACT.TXT> { 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,0,0,0,0,0,0,0,0,45,4,0,0,32,2,0,0 }

ExtF <.\ABSTRACT.TXT> 1,1,0,{ 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,0,0,0,0,0,0,0,0,45,4,0,0,32,2,0,0 }

TARGOPT 1, (RTX51 Tiny Ex2)
 CLK51=12000000
  OPTTT 1,1,1,0
  OPTHX 0,65535,0,0,0
  OPTLX 120,65,8,<.\>
  OPTOX 16
  OPTLT 1,1,1,0,1,1,0,1,0,0,0,0
  OPTXL 1,1,1,1,1,1,1,0,0
  OPTFL 1,0,1
  OPTBL 0,(Data Sheet)<DATASHTS\PHILIPS\8XC52_54.PDF>
  OPTBL 1,(Add on databooks)<DATASHTS\ADDBOOKS.PDF>
  OPTBL 2,(Programmer's Guide & Instruction Set Manual)<DATASHTS\PHILIPS\UPROGGUI.PDF>
  OPTDL (S8051.DLL)()(DP51.DLL)(-p52)(S8051.DLL)()(TP51.DLL)(-p52)
  OPTDBG 501,0,()()()()(.\Debugger.ini)()()()()() ()()()()
  OPTKEY 0,(DLGDP51)((98=-1,-1,-1,-1,0)(82=-1,-1,-1,-1,0)(83=-1,-1,-1,-1,0)(84=-1,-1,-1,-1,0)(85=-1,-1,-1,-1,0)(99=-1,-1,-1,-1,0)(91=-1,-1,-1,-1,0)(92=-1,-1,-1,-1,0)(93=-1,-1,-1,-1,0)(2000=-1,-1,-1,-1,0)(7000=-1,-1,-1,-1,0))
  OPTWA 0,1,(counter0)
  OPTWA 1,1,(counter1)
  OPTWA 2,1,(counter2)
  OPTWA 3,1,(counter3)
  OPTMM 1,0,(c:0x11b1)
  OPTMM 2,0,(\measure\save_record)
  OPTDF 0x82
  OPTLE <>
  OPTLC <>
EndOpt