help.exp

lwip在ucos上的移植

# test help set environment
gdb_test "help set environment" "Set environment variable value to give the program..*\[\r\n\]+Arguments are VAR VALUE where VAR is variable name and VALUE is value..*\[\r\n\]+VALUES of environment variables are uninterpreted strings..*\[\r\n\]+This does not affect the program until the next \"run\" command." "help set environment"
# test help set height
gdb_test "help set height" "Set number of lines gdb thinks are in a page."  "help set height"
# test help set history expansion
gdb_test "help set history expansion" "Set history expansion on command input..*\[\r\n\]+Without an argument, history expansion is enabled." "help set history expansion"
# test help set history filename
gdb_test "help set history filename" "Set the filename in which to record the command history.*\[\r\n\]+ .the list of previous commands of which a record is kept.." "help set history filename"
# test help set history save
gdb_test "help set history save" "Set saving of the history record on exit..*\[\r\n\]+Use \"on\" to enable the saving, and \"off\" to disable it..*\[\r\n\]+Without an argument, saving is enabled." "help set history save"
# test help set history size
gdb_test "help set history size" "Set the size of the command history, .*\[\r\n\]+ie. the number of previous commands to keep a record of." "help set history size"
# test help set history
gdb_test "help set history" "Generic command for setting command history parameters..*\[\r\n\]+List of set history subcommands:.*\[\r\n\]+set history expansion -- Set history expansion on command input.*\[\r\n\]+set history filename -- Set the filename in which to record the command history.*\[\r\n\]+set history save -- Set saving of the history record on exit.*\[\r\n\]+set history size -- Set the size of the command history.*\[\r\n\]+Type \"help set history\" followed by set history subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "help set history"
# test help set language
gdb_test "help set language" "Set the current source language."  "help set language"
# test help set listsize
gdb_test "help set listsize" "Set number of source lines gdb will list by default."  "help set listsize"
# test help set print "p" abbreviation
# FIXME -- Ultrix hangs randomly on this very long output from gdb and
# continues with its output only if something is sent to gdb.
# Also, if the system is slow, it may time out because the output is large.
gdb_test "help set p" ".*\[\r\n\]+Generic command for setting how things print..*\[\r\n\]+List of set print subcommands:.*\[\r\n\]+Type \"help set print\" followed by set print subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "help set print \"p\" abbreviatio"
# test help set print "pr" abbreviation
gdb_test "help set pr" ".*\[\r\n\]+Generic command for setting how things print..*\[\r\n\]+List of set print subcommands:.*\[\r\n\]+Type \"help set print\" followed by set print subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "help set print \"pr\" abbreviation"
# test help set print
gdb_test "help set print" ".*\[\r\n\]+Generic command for setting how things print..*\[\r\n\]+List of set print subcommands:.*\[\r\n\]+Type \"help set print\" followed by set print subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "help set print"
# test help set print address
gdb_test "help set print address" "Set printing of addresses."  "help set print address"
# test help set print array
gdb_test "help set print array" "Set prettyprinting of arrays."  "help set print array"
# test help set print asm-demangle
gdb_test "help set print asm-demangle" "Set demangling of C\[+\]+ names in disassembly listings."  "help set print asm-demangle"
# test help set print demangle
gdb_test "help set print demangle" "Set demangling of encoded C\[+\]+ names when displaying symbols."  "help set print demangle"
# test help set print elements
gdb_test "help set print elements" "Set limit on string chars or array elements to print..*\[\r\n\]+\"set print elements 0\" causes there to be no limit." "help set print elements"
# test help set print object
gdb_test "help set print object" "Set printing of object's derived type based on vtable info."  "help set print object"
# test help set print pretty
gdb_test "help set print pretty" "Set prettyprinting of structures."  "help set print pretty"
# test help set print sevenbit-strings
gdb_test "help set print sevenbit-strings" "Set printing of 8-bit characters in strings as .nnn."  "help set print sevenbit-strings"
# test help set print union
gdb_test "help set print union" "Set printing of unions interior to structures."  "help set print union"
# test help set print vtbl
gdb_test "help set print vtbl" "Set printing of C\[+\]+ virtual function tables."  "help set print vtbl"
# test help set prompt
gdb_test "help set prompt" "Set gdb's prompt"  "help set prompt"
# test help set radix
gdb_test "help set radix" "Set default input and output number radices.*\[\r\n\]+Use \'set input-radix\' or \'set output-radix\' to independently set each..*\[\r\n\]+Without an argument, sets both radices back to the default value of 10..*\[\r\n\]+" "help set radix"
# test help set symbol-reloading
gdb_test "help set symbol-reloading" "Set dynamic symbol table reloading multiple times in one run."  "help set symbol-reloading"
# test help set variable
gdb_test "help set variable" ".*\[\r\n\]+Evaluate expression EXP and assign result to variable VAR, using assignment.*\[\r\n\]+syntax appropriate for the current language .VAR = EXP or VAR := EXP for.*\[\r\n\]+example..  VAR may be a debugger \"convenience\" variable .names starting.*\[\r\n\]+with \\\$., a register .a few standard names starting with \\\$., or an actual.*\[\r\n\]+variable in the program being debugged.  EXP is any valid expression.*\[\r\n\]+This may usually be abbreviated to simply \"set\"." "help set variable"
# test help set verbose
gdb_test "help set verbose" "Set verbosity."  "help set verbose"
#test help set width
gdb_test "help set width" "Set number of characters gdb thinks are in a line."  "help set width"
# test help set write
# This is only supported on targets which use exec.o.
gdb_test "help set write" "Set writing into executable and core files."  "help set write"
# test help set
# FIXME -- Ultrix hangs randomly on this very long output from gdb and
# continues with its output only if something is sent to gdb.
# Also, if the system is slow, it may time out because the output is large.
#gdb_test "help set" ".*\[\r\n\]+Evaluate expression EXP and assign result to variable VAR, using assignment.*\[\r\n\]+syntax appropriate for the current language .VAR = EXP or VAR := EXP for.*\[\r\n\]+example..  VAR may be a debugger \"convenience\" variable .names starting.*\[\r\n\]+with \\\$., a register .a few standard names starting with \\\$., or an actual.*\[\r\n\]+variable in the program being debugged.  EXP is any valid expression.*\[\r\n\]+set listsize -- Set number of source lines gdb will list by default.*\[\r\n\]+Type \"help set\" followed by set subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous..*\[\r\n\]+" "help set"
# test help shell
gdb_test "help shell" "Execute the rest of the line as a shell command.  .*\[\r\n\]+With no arguments, run an inferior shell." "help shell"
#test help show annotate
gdb_test "help show annotate" "Show annotation_level.*\[\r\n\]+0 == normal;     1 == fullname \\(for use when running under emacs\\).*\[\r\n\]+2 == output annotated suitably for use by programs that control GDB." "help show annotate"
# test help show args
gdb_test "help show args" "Show argument list to give program being debugged when it is started..*\[\r\n\]+Follow this command with any number of args, to be passed to the program."
# test help show check "c" abbreviation
gdb_test "help show c" "Show the status of the type/range checker.*\[\r\n\]+List of show check subcommands:.*\[\r\n\]+show check range -- Show range checking.*\[\r\n\]+show check type -- Show type checking.*\[\r\n\]+Type \"help show check\" followed by show check subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "help show check \"c\" abbreviation"
# test help show check
gdb_test "help show check" "Show the status of the type/range checker.*\[\r\n\]+List of show check subcommands:.*\[\r\n\]+show check range -- Show range checking.*\[\r\n\]+show check type -- Show type checking.*\[\r\n\]+Type \"help show check\" followed by show check subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "help show check"
# test help show check range
gdb_test "help show check range" "Show range checking.  .on/warn/off/auto."  "help show check range"
# test help show check type
gdb_test "help show check type" "Show type checking.  .on/warn/off/auto."  "help show check type"
# test help show commands
gdb_test "help show commands" "Show the history of commands you typed..*\[\r\n\]+You can supply a command number to start with, or a `\[+\]' to start after.*\[\r\n\]+the previous command number shown." "help show commands"
# test help show complaints
gdb_test "help show complaints" "Show max number of complaints about incorrect symbols."  "help show complaints"
# test help show confirm
gdb_test "help show confirm" "Show whether to confirm potentially dangerous operations."  "help show confirm"
# test help show convenience
gdb_test "help show convenience" "Debugger convenience .\".foo\". variables..*\[\r\n\]+These variables are created when you assign them values;.*\[\r\n\]+thus, \"print .foo=1\" gives \".foo\" the value 1.  Values may be any type..*\[\r\n\]+A few convenience variables are given values automatically:.*\[\r\n\]+\"._\"holds the last address examined with \"x\" or \"info lines\",.*\[\r\n\]+\".__\" holds the contents of the last address examined with \"x\"." "help show convenience"
# test help show directories
gdb_test "help show directories" "Current search path for finding source files..*\[\r\n\]+.cwd in the path means the current working directory..*\[\r\n\]+.cdir in the path means the compilation directory of the source file." "help show directories"
# test help show editing
gdb_test "help show editing" "Show editing of command lines as they are typed..*\[\r\n\]+Use \"on\" to enable the editing, and \"off\" to disable it..*\[\r\n\]+Without an argument, command line editing is enabled.  To edit, use.*\[\r\n\]+EMACS-like or VI-like commands like control-P or ESC." "help show editing"
# test help show environment
gdb_test "help show environment" "The environment to give the program, or one variable's value..*\[\r\n\]+With an argument VAR, prints the value of environment variable VAR to.*\[\r\n\]+give the program being debugged.  With no arguments, prints the entire.*\[\r\n\]+environment to be given to the program." "help show environment"
# test help show height
gdb_test "help show height" "Show number of lines gdb thinks are in a page."  "help show height"
# test help show history expansion
gdb_test "help show history expansion" "Show history expansion on command input..*\[\r\n\]+Without an argument, history expansion is enabled." "help show history expansion"
# test help show history filename
gdb_test "help show history filename" "Show the filename in which to record the command history.*\[\r\n\]+ .the list of previous commands of which a record is kept.." "help show history filename"
# test help show history save
gdb_test "help show history save" "Show saving of the history record on exit..*\[\r\n\]+Use \"on\" to enable the saving, and \"off\" to disable it..*\[\r\n\]+Without an argument, saving is enabled." "help show history save"
# test help show history size