userdef.exp

lwip在ucos上的移植

# Tests of overloaded operators resolution.
# Copyright (C) 1998, 1999 Free Software Foundation, Inc.

# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
# 
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
# 
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  

# Please email any bugs, comments, and/or additions to this file to:
# [e-mail]

# written by Elena Zannoni ([e-mail])
#
# source file "userdef.cc"
#

if $tracelevel then {
        strace $tracelevel
}

if { [skip_cplus_tests] } { continue }

set testfile "userdef"
set srcfile ${testfile}.cc
set binfile ${objdir}/${subdir}/${testfile}

if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug c++}] != "" } {
     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
}


gdb_exit
gdb_start
gdb_reinitialize_dir $srcdir/$subdir
gdb_load ${binfile}


if ![runto_main] then {
    perror "couldn't run to breakpoint"
    continue
}

send_gdb "break marker1\n" ; gdb_expect -re ".*$gdb_prompt $"
    send_gdb "cont\n"
    gdb_expect {
        -re "Break.* marker1 \\(\\) at .*:$decimal.*$gdb_prompt $" {
            send_gdb "up\n"
            gdb_expect {
                -re ".*$gdb_prompt $" { pass "up from marker1" }
                timeout { fail "up from marker1" }
            }
        }
        -re "$gdb_prompt $" { fail "continue to marker1"  }
        timeout { fail "(timeout) continue to marker1"  }
    }


setup_xfail "hppa*-*-*"
send_gdb "print one+two\n"
gdb_expect {
    -re "FIXME.*$gdb_prompt $" {
        pass "print value of one + two"
      }
    -re ".*$gdb_prompt $" { xfail "print value of one two" }
    timeout           { fail "(timeout) print value of one two" }
  }

setup_xfail "hppa*-*-*"
send_gdb "print one-two\n"
gdb_expect {
    -re ".*FIXME.*$gdb_prompt $" {
        pass "print value of one - two"
      }
    -re ".*$gdb_prompt $" { xfail "print value of one - two" }
    timeout           { fail "(timeout) print value of one - two" }
  }

setup_xfail "hppa*-*-*"
send_gdb "print one*two\n"
gdb_expect {
    -re ".*FIXME.*$gdb_prompt $" {
        pass "print value of one * two"
      }
    -re ".*$gdb_prompt $" { xfail "print value of one * two" }
    timeout           { fail "(timeout) print value of one * two" }
  }

setup_xfail "hppa*-*-*"
send_gdb "print one/two\n"
gdb_expect {
    -re ".*FIXME.*$gdb_prompt $" {
        pass "print value of one / two"
      }
    -re ".*$gdb_prompt $" { xfail "print value of one / two" }
    timeout           { fail "(timeout) print value of one / two" }
  }

setup_xfail "hppa*-*-*"
send_gdb "print one%two\n"
gdb_expect {
    -re ".*FIXME.*$gdb_prompt $" {
        pass "print value of one % two"
      }
    -re ".*$gdb_prompt $" { xfail "print value of one % two" }
    timeout           { fail "(timeout) print value of one % two" }
  }

setup_xfail "hppa*-*-*"
send_gdb "print one&&two\n"
gdb_expect {
    -re ".*FIXME.*$gdb_prompt $" {
        pass "print value of one && two"
      }
    -re ".*$gdb_prompt $" { xfail "print value of one && two" }
    timeout           { fail "(timeout) print value of one && two" }
  }

setup_xfail "hppa*-*-*"
send_gdb "print one||two\n"
gdb_expect {
    -re ".*FIXME.*$gdb_prompt $" {
        pass "print value of one|| two"
      }
    -re ".*$gdb_prompt $" { xfail "print value of one|| two" }
    timeout           { fail "(timeout) print value of one|| two" }
  }

setup_xfail "hppa*-*-*"
send_gdb "print one&two\n"
gdb_expect {
    -re ".*FIXME.*$gdb_prompt $" {
        pass "print value of one & two"
      }
    -re ".*$gdb_prompt $" { xfail "print value of one & two" }
    timeout           { fail "(timeout) print value of one & two" }
  }

setup_xfail "hppa*-*-*"
send_gdb "print one|two\n"
gdb_expect {
    -re ".*FIXME.*$gdb_prompt $" {
        pass "print value of one | two"
      }
    -re ".*$gdb_prompt $" { xfail "print value of one | two" }
    timeout           { fail "(timeout) print value of one | two" }
  }

setup_xfail "hppa*-*-*"
send_gdb "print one ^ two\n"
gdb_expect {
    -re ".*FIXME.*$gdb_prompt $" {
        pass "print value of one ^  two"
      }
    -re ".*$gdb_prompt $" { xfail "print value of one ^  two" }
    timeout           { fail "(timeout) print value of one ^  two" }
  }


setup_xfail "hppa*-*-*"
send_gdb "print one < two\n"
gdb_expect {
    -re ".*FIXME.*$gdb_prompt $" {
        pass "print value of one <  two"
      }
    -re ".*$gdb_prompt $" { xfail "print value of one <  two" }
    timeout           { fail "(timeout) print value of one <  two" }
  }

setup_xfail "hppa*-*-*"
send_gdb "print one <= two\n"
gdb_expect {
    -re ".*FIXME.*$gdb_prompt $" {
        pass "print value of one <=  two"
      }
    -re ".*$gdb_prompt $" { xfail "print value of one <=  two" }
    timeout           { fail "(timeout) print value of one <=  two" }
  }

setup_xfail "hppa*-*-*"
send_gdb "print one > two\n"
gdb_expect {
    -re ".*FIXME.*$gdb_prompt $" {
        pass "print value of one  > two"
      }
    -re ".*$gdb_prompt $" { xfail "print value of one >  two" }
    timeout           { fail "(timeout) print value of one >  two" }
  }

setup_xfail "hppa*-*-*"
send_gdb "print one >= two\n"
gdb_expect {
    -re ".*FIXME.*$gdb_prompt $" {
        pass "print value of one >=  two"
      }
    -re ".*$gdb_prompt $" { xfail "print value of one >=  two" }
    timeout           { fail "(timeout) print value of one >=  two" }
  }


setup_xfail "hppa*-*-*"
send_gdb "print one==two\n"
gdb_expect {
    -re ".*FIXME.*$gdb_prompt $" {
        pass "print value of one == two"
      }
    -re ".*$gdb_prompt $" { xfail "print value of one == two" }
    timeout           { fail "(timeout) print value of one == two" }
  }


setup_xfail "hppa*-*-*"
send_gdb "print one!=two\n"
gdb_expect {
    -re ".*FIXME.*$gdb_prompt $" {
        pass "print value of one != two"
      }
    -re ".*$gdb_prompt $" { xfail "print value of one != two" }
    timeout           { fail "(timeout) print value of one != two" }
  }

setup_xfail "hppa*-*-*"
send_gdb "print one<<31\n"
gdb_expect {
    -re ".*FIXME.*$gdb_prompt $" {
        pass "print value of one<<31"
      }
    -re ".*$gdb_prompt $" { xfail "print value of one<<31" }
    timeout           { fail "(timeout) print value of one<<31" }
  }

setup_xfail "hppa*-*-*"
send_gdb "print one>>31\n"
gdb_expect {
    -re ".*FIXME.*$gdb_prompt $" {
        pass "print value of one>>31"
      }
    -re ".*$gdb_prompt $" { xfail "print value of one>>31" }
    timeout           { fail "(timeout) print value of one>>31" }
  }

setup_xfail "hppa*-*-*"
send_gdb "print !one\n"
gdb_expect {
    -re ".*FIXME.*$gdb_prompt $" {
        pass "print value of !one"
      }
    -re ".*$gdb_prompt $" { xfail "print value of !one" }
    timeout           { fail "(timeout) print value of !one" }
  }

setup_xfail "hppa*-*-*"
send_gdb "print ~one\n"
gdb_expect {
    -re ".*FIXME.*$gdb_prompt $" {
        pass "print value of ~one"
      }
    -re ".*$gdb_prompt $" { xfail "print value of ~one" }
    timeout           { fail "(timeout) print value of ~one" }
  }

setup_xfail "hppa*-*-*"
send_gdb "print -one\n"
gdb_expect {
    -re ".*FIXME.*$gdb_prompt $" {
        pass "print value of -one"
      }
    -re ".*$gdb_prompt $" { xfail "print value of -one" }
    timeout           { fail "(timeout) print value of -one" }
  }

setup_xfail "hppa*-*-*"
send_gdb "print one++\n"
gdb_expect {
    -re ".*FIXME.*$gdb_prompt $" {
        pass "print value of one++"
      }
    -re ".*$gdb_prompt $" { xfail "print value of one++" }
    timeout           { fail "(timeout) print value of one++" }
  }

setup_xfail "hppa*-*-*"
send_gdb "print ++one\n"
gdb_expect {
    -re ".*FIXME.*$gdb_prompt $" {
        pass "print value of ++one>>31"
      }
    -re ".*$gdb_prompt $" { xfail "print value of ++one" }
    timeout           { fail "(timeout) print value of ++one" }
  }

setup_xfail "hppa*-*-*"
send_gdb "print one--\n"
gdb_expect {
    -re ".*.FIXME*$gdb_prompt $" {
        pass "print value of one-->>31"
      }
    -re ".*$gdb_prompt $" { xfail "print value of one-->>31" }
    timeout           { fail "(timeout) print value of one-->>31" }
  }


setup_xfail "hppa*-*-*"
send_gdb "print --one\n"
gdb_expect {
    -re ".*FIXME.*$gdb_prompt $" {
        pass "print value of --one"
      }
    -re ".*$gdb_prompt $" { xfail "print value of --one" }
    timeout           { fail "(timeout) print value of --one" }
  }

setup_xfail "hppa*-*-*"
send_gdb "print one+=7\n"
gdb_expect {
    -re ".*FIXME.*$gdb_prompt $" {
        pass "print value of one+=7"
      }
    -re ".*$gdb_prompt $" { xfail "print value of one+=7" }
    timeout           { fail "(timeout) print value of one+=7" }
  }

setup_xfail "hppa*-*-*"
send_gdb "print two=one\n"
gdb_expect {
    -re ".*FIXME.*$gdb_prompt $" {
        pass "print value of two=one"
      }
    -re ".*$gdb_prompt $" { xfail "print value of two=one" }
    timeout           { fail "(timeout) print value of two=one" }
  }

gdb_exit
return 0