cmd.bak

来自「日本FAMILY按摩椅W-1用的配套操作器程序。带VFD显示」· BAK 代码 · 共 137 行

/****************************************************************/
/*																*/
/*	Massage Machine Controler System							*/
/*																*/
/****************************************************************/
/*	command definition data										*/
/****************************************************************/


#define		CD_STX			0x7f		/* W-1 cmd start code */
#define		CD_DUMMY		0xf0		/* empty code */
#define		CD_PW_ON		0x01		/* power on code */
#define		CD_PW_OFF		0x02	    /* power off code */
#define     CD_STOP         0x03        /* stop    */
#define		CD_FT_UP		0x0c	
#define		CD_FT_DN		0x0d			
#define		CD_RCL_UP		0x0a
#define		CD_RCL_DN		0x0b
#define		CD_SP_UP		0x08
#define		CD_SP_DN		0x09
/*leg side rise/down */
#define     CD_LEG_UP       0x0e
#define     CD_LEG_DN       0x0f
/* course command */
#define		CD_AC1			0x10
#define		CD_AC2			0x11
#define		CD_AC3			0x12
#define		CD_AC4			0x13
#define		CD_AC5			0x14
#define		CD_AC6			0x15
#define		CD_AC7			0x16
#define		CD_AC8			0x17
/* roll command */
#define		CD_BR			0x18
#define     CD_BR_STP       0x19
#define     CD_PR           0x1a
#define     CD_PR_STP       0x1b
/* mm_mode command */
#define     CD_MM1          0x20
#define     CD_MM1_REV      0x21
#define     CD_MM2          0x22
#define     CD_MM2_REV      0x23
#define     CD_MM3          0x26
#define     CD_MM_STP       0x2e

#define     CD_MT           0x24
#define     CD_MT_REV       0x25
#define     CD_MT_STP       0x2e

#define     CD_ST1          0x27
#define     CD_ST2          0x28
#define     CD_ST_STP       0x2e

#define     CD_TT1          0x29
#define     CD_TT2          0x2a
#define     CD_TT_STP       0x2e

/* hand air massage: strong, mid, soft */
#define    CD_MARM_AIR_SOFT     0x30
#define    CD_MARM_AIR_NORMAL   0x31
#define    CD_MARM_AIR_STR      0x32

#define    CD_MARM_AIR_ON       0x4c
#define    CD_MARM_AIR_OFF      0x4d

/* hip air massage: strong,mid,soft */
#define   CD_MH_AIR_SOFT       0x33
#define   CD_MH_AIR_NORMAL     0x34
#define   CD_MH_AIR_STR        0x35

/* little leg air massage: strong,mid,soft */
#define   CD_ML_AIR_SOFT       0x36
#define   CD_ML_AIR_NORMAL        0x37
#define   CD_ML_AIR_STR        0x38

/* little leg and hip action */
#define   CD_MLH_AIR_ON        0x4a
#define   CD_MLH_AIR_OFF       0x4b
/* speed command */
#define   CD_SPD1              0x50
#define   CD_SPD2              0x51
#define   CD_SPD3              0x52
#define   CD_SPD4              0x53
#define   CD_SPD5              0x54
#define   CD_SPD6              0x55
#define   CD_SPD7              0x56
/* yn up/dn command */
#define   CD_YN_UP             0x58
#define   CD_YN_DN             0x59
/* narrow,middle,width command */

#define   CD_NAR               0x5c
#define   CD_MID               0x5d
#define   CD_WID               0x5e
/* hand vibrator: soft ,strong */
#define   CD_MH_SOFT     0x60
#define   CD_MH_STR      0x61
#define   CD_MH_STP      0x62
/* back vibrator: soft,strong */
#define   CD_MB_SOFT       0x66
#define   CD_MB_STR        0x67
#define   CD_MB_STP        0x68
/* course mode:  hand and back vibrator CUT/reset command */

#define   CD_HVIB_OFF          0x6a
#define   CD_HVIB_ON           0x6b
#define   CD_BVIB_OFF          0x6e
#define   CD_BVIB_ON           0x6f

// ********   seat heat
#define   CD_HEAT_ON          0x05 
#define   CD_HEAT_OFF         0x06



/********cmd_over define *****************/
/******** VFD DISP USE *******************/
#define   CD_BR_OVER   1
#define   CD_PR_OVER   2
#define   CD_MM1_OVER  3
#define   CD_MM2_OVER  4
#define   CD_MT_OVER   5
#define   CD_MM3_OVER  6
#define   CD_ST1_OVER  7
#define   CD_ST2_OVER  8
#define   CD_TT1_OVER  9
#define   CD_TT2_OVER  10
#define   CD_MARM_OVER 11
#define   CD_MLH_OVER  12
#define   CD_MH_OVER   13
#define   CD_MB_OVER   14


/*************************************/
/********   auto test command ********/
#define  CD_PACK  0xa6