project_mas.map

DSP, 三相交流异步电机控制程序, C语言, 空间矢量SPWM, 内含PI算法及三相桥开关控制

################################################################################
#                                                                              #
#      IAR Universal Linker V4.59N/386                                         #
#                                                                              #
#           Link time     =  21/Sep/2005  17:05:35                             #
#           Target CPU    =  A90                                               #
#           List file     =  "D:\Work software\at90pwm3\demo\ac_control_motor\ #
#                            Debug\List\project_mas.map"                       #
#           Output file 1 =  "D:\Work software\at90pwm3\demo\ac_control_motor\ #
#                            Debug\Exe\project_mas.dbg"                        #
#                            Format: ubrof8                                    #
#                            UBROF version 8.0.2                               #
#           Command line  =  "D:\Work software\at90pwm3\demo\ac_control_motor\ #
#                            Debug\Obj\adc.r90"                                #
#                            "D:\Work software\at90pwm3\demo\ac_control_motor\ #
#                            Debug\Obj\controlVF.r90"                          #
#                            "D:\Work software\at90pwm3\demo\ac_control_motor\ #
#                            Debug\Obj\dac.r90"                                #
#                            "D:\Work software\at90pwm3\demo\ac_control_motor\ #
#                            Debug\Obj\duty_cycle.r90"                         #
#                            "D:\Work software\at90pwm3\demo\ac_control_motor\ #
#                            Debug\Obj\init.r90"                               #
#                            "D:\Work software\at90pwm3\demo\ac_control_motor\ #
#                            Debug\Obj\main_natural_PWM2.r90"                  #
#                            "D:\Work software\at90pwm3\demo\ac_control_motor\ #
#                            Debug\Obj\mc_control.r90"                         #
#                            "D:\Work software\at90pwm3\demo\ac_control_motor\ #
#                            Debug\Obj\psc_initialisation2.r90"                #
#                            "D:\Work software\at90pwm3\demo\ac_control_motor\ #
#                            Debug\Obj\read_acquisitionADC.r90"                #
#                            -o                                                #
#                            "D:\Work software\at90pwm3\demo\ac_control_motor\ #
#                            Debug\Exe\project_mas.dbg"                        #
#                            -Fubrof8 -l                                       #
#                            "D:\Work software\at90pwm3\demo\ac_control_motor\ #
#                            Debug\List\project_mas.map"                       #
#                            -xms                                              #
#                            "-IC:\Program Files\IAR Systems\Embedded Workbenc #
#                            h 4.0\avr\LIB\"                                   #
#                            -f                                                #
#                            "D:\Work software\at90pwm3\demo\ac_control_motor\ #
#                            cfg90pwm3.xcl"                                    #
#                            (-D_..X_CSTACK_SIZE=40 -D_..X_RSTACK_SIZE=0A      #
#                            -D_..X_HEAP_SIZE=40 -D_..X_EXT_SRAM_BASE=0        #
#                            -D_..X_EXT_SRAM_SIZE=0 -D_..X_EXT_EPROM_BASE=0    #
#                            -D_..X_EXT_EPROM_SIZE=0                           #
#                            -D_..X_EXT_EEPROM_BASE=0                          #
#                            -D_..X_EXT_EEPROM_SIZE=0 -ca90                    #
#                            -D_..X_INTVEC_SIZE=80 -D_..X_FLASH_TEND=FF        #
#                            -D_..X_FLASH_NEND=1FFF -D_..X_FLASH_END=1FFF      #
#                            -D_..X_SRAM_BASE=100 -D_..X_SRAM_TEND=100         #
#                            -D_..X_SRAM_END=2FF -D_..X_EEPROM_END=1FF         #
#                            -Z(CODE)INTVEC=0-(_..X_INTVEC_SIZE-1) -H1895      #
#                            -h(CODE)0-_..X_INTVEC_SIZE                        #
#                            -Z(CODE)TINY_F=_..X_INTVEC_SIZE-_..X_FLASH_TEND   #
#                            -Z(CODE)NEAR_F,SWITCH,INITTAB,DIFUNCT=_..X_INTVEC #
#                            _SIZE-_..X_FLASH_NEND                             #
#                            -Z(CODE)CODE=_..X_INTVEC_SIZE-_..X_FLASH_END      #
#                            -Z(CODE)NEAR_C                                    #
#                            -Z(FARCODE)FAR_F=_..X_INTVEC_SIZE-_..X_FLASH_END  #
#                            -Z(CODE)HUGE_F=_..X_INTVEC_SIZE-_..X_FLASH_END    #
#                            -Z(CODE)TINY_ID,NEAR_ID,CHECKSUM=_..X_INTVEC_SIZE #
#                            -_..X_FLASH_END                                   #
#                            -Z(DATA)TINY_I,TINY_Z,TINY_N=_..X_SRAM_BASE-_..X_ #
#                            SRAM_TEND                                         #
#                            -Z(DATA)NEAR_I,NEAR_Z=_..X_SRAM_BASE-_..X_SRAM_EN #
#                            D,_..X_EXT_SRAM_BASE-(_..X_EXT_SRAM_BASE+_..X_EXT #
#                            _SRAM_SIZE)                                       #
#                            -Z(DATA)RSTACK+_..X_RSTACK_SIZE=_..X_SRAM_BASE-_. #
#                            .X_SRAM_END                                       #
#                            -Z(DATA)CSTACK+_..X_CSTACK_SIZE=_..X_SRAM_BASE-_. #
#                            .X_SRAM_END                                       #
#                            -Z(DATA)HEAP+_..X_HEAP_SIZE=_..X_SRAM_BASE-_..X_S #
#                            RAM_END                                           #
#                            -Z(XDATA)EEPROM_I,EEPROM_N=0-_..X_EEPROM_END      #
#                            -e_Printf_1=_Printf -e_Scanf_1=_Scanf -w29) -s    #
#                            __program_start                                   #
#                            "C:\Program Files\IAR Systems\Embedded Workbench  #
#                            4.0\avr\LIB\CLIB\cl1s-ec.r90"                     #
#                                                                              #
#                        Copyright 1987-2005 IAR Systems. All rights reserved. #
################################################################################





                ****************************************
                *                                      *
                *           CROSS REFERENCE            *
                *                                      *
                ****************************************

       Program entry at : CODE      00000000  Relocatable, from module : ?RESET




                ****************************************
                *                                      *
                *            RUNTIME MODEL             *
                *                                      *
                ****************************************

  R4              = REG
  R5              = REG
  __64bit_doubles = disabled
  __cpu           = 1
  __enhanced_core = enabled
  __has_elpm      = false
  __memory_model  = 2
  __rt_version    = 3



                ****************************************
                *                                      *
                *              MODULE MAP              *
                *                                      *
                ****************************************


  DEFINED ABSOLUTE ENTRIES
  PROGRAM MODULE, NAME : ?ABS_ENTRY_MOD

Absolute parts
           ENTRY                   ADDRESS         REF BY
           =====                   =======         ======
           _..X_EEPROM_END         000001FF 
           _..X_SRAM_END           000002FF 
           _..X_SRAM_TEND          00000100 
           _..X_SRAM_BASE          00000100 
           _..X_FLASH_END          00001FFF 
           _..X_FLASH_NEND         00001FFF 
           _..X_FLASH_TEND         000000FF 
           _..X_INTVEC_SIZE        00000080 
           _..X_EXT_EEPROM_SIZE    00000000 
           _..X_EXT_EEPROM_BASE    00000000 
           _..X_EXT_EPROM_SIZE     00000000 
           _..X_EXT_EPROM_BASE     00000000 
           _..X_EXT_SRAM_SIZE      00000000 
           _..X_EXT_SRAM_BASE      00000000 
           _..X_HEAP_SIZE          00000040 
           _..X_RSTACK_SIZE        0000000A 
           _..X_CSTACK_SIZE        00000040 
    *************************************************************************

  FILE NAME : D:\Work software\at90pwm3\demo\ac_control_motor\Debug\Obj\adc.r90
  PROGRAM MODULE, NAME : adc

  SEGMENTS IN THE MODULE
  ======================
ABSOLUTE
  Relative segment, address: DATA 0000007A - 0000007A (0x1 bytes), align: 0
  Segment part 1. ROOT.       Intra module refs:   ADC_Init
           ENTRY                   ADDRESS         REF BY
           =====                   =======         ======
           _A_ADCSRA               0000007A 
    -------------------------------------------------------------------------
ABSOLUTE
  Relative segment, address: DATA 0000007B - 0000007B (0x1 bytes), align: 0
  Segment part 2. ROOT.       Intra module refs:   ADC_Init
           ENTRY                   ADDRESS         REF BY
           =====                   =======         ======
           _A_ADCSRB               0000007B 
    -------------------------------------------------------------------------
ABSOLUTE
  Relative segment, address: DATA 0000007C - 0000007C (0x1 bytes), align: 0
  Segment part 3. ROOT.
           ENTRY                   ADDRESS         REF BY
           =====                   =======         ======
           _A_ADMUX                0000007C 
    -------------------------------------------------------------------------
CODE
  Relative segment, address: CODE 0000008C - 000000EB (0x60 bytes), align: 1
  Segment part 10.
           ENTRY                   ADDRESS         REF BY
           =====                   =======         ======
           ADC_Init                0000008C        main (main_natural_PWM2)
               stack 1 = 00000000 ( 00000002 )
    -------------------------------------------------------------------------
CODE
  Relative segment, address: CODE 000000EC - 000000F7 (0xc bytes), align: 1
  Segment part 11.
           ENTRY                   ADDRESS         REF BY
           =====                   =======         ======
           ADC_start_conv          000000EC        main (main_natural_PWM2)
               stack 1 = 00000000 ( 00000002 )
    -------------------------------------------------------------------------
ABSOLUTE
  Relative segment, address: DATA 0000001C, align: 0
  Segment part 4. ROOT.
           ENTRY                   ADDRESS         REF BY
           =====                   =======         ======
           __?EECR                 0000001C 
    -------------------------------------------------------------------------
ABSOLUTE
  Relative segment, address: DATA 0000001D, align: 0
  Segment part 5. ROOT.
           ENTRY                   ADDRESS         REF BY
           =====                   =======         ======
           __?EEDR                 0000001D 
    -------------------------------------------------------------------------
ABSOLUTE
  Relative segment, address: DATA 0000001E, align: 0
  Segment part 6. ROOT.
           ENTRY                   ADDRESS         REF BY
           =====                   =======         ======
           __?EEARL                0000001E 
    -------------------------------------------------------------------------
ABSOLUTE
  Relative segment, address: DATA 0000001F, align: 0
  Segment part 7. ROOT.
           ENTRY                   ADDRESS         REF BY
           =====                   =======         ======
           __?EEARH                0000001F 

    *************************************************************************

  FILE NAME : D:\Work software\at90pwm3\demo\ac_control_motor\Debug\Obj\controlVF.r90
  PROGRAM MODULE, NAME : controlVF

  SEGMENTS IN THE MODULE
  ======================
CODE
  Relative segment, address: CODE 000000F8 - 0000012D (0x36 bytes), align: 1
  Segment part 7.
           ENTRY                   ADDRESS         REF BY
           =====                   =======         ======
           controlVF               000000F8        main (main_natural_PWM2)
               stack 1 = 00000000 ( 00000004 )

    *************************************************************************

  FILE NAME : D:\Work software\at90pwm3\demo\ac_control_motor\Debug\Obj\dac.r90
  PROGRAM MODULE, NAME : dac

  SEGMENTS IN THE MODULE
  ======================
ABSOLUTE
  Relative segment, address: DATA 000000AA - 000000AA (0x1 bytes), align: 0
  Segment part 1. ROOT.
           ENTRY                   ADDRESS         REF BY
           =====                   =======         ======
           _A_DACON                000000AA 
    -------------------------------------------------------------------------
CODE
  Relative segment, address: CODE 0000012E - 0000014D (0x20 bytes), align: 1
  Segment part 8.
           ENTRY                   ADDRESS         REF BY
           =====                   =======         ======
           DAC_Init                0000012E        main (main_natural_PWM2)
               stack 1 = 00000000 ( 00000002 )

    *************************************************************************

  FILE NAME : D:\Work software\at90pwm3\demo\ac_control_motor\Debug\Obj\duty_cycle.r90
  PROGRAM MODULE, NAME : duty_cycle

  SEGMENTS IN THE MODULE
  ======================
NEAR_I
  Relative segment, address: DATA 00000100 - 00000178 (0x79 bytes), align: 0
  Segment part 7.             Intra module refs:   duty_cycle
           ENTRY                   ADDRESS         REF BY
           =====                   =======         ======
           tab_sin                 00000100 
    -------------------------------------------------------------------------
CODE
  Relative segment, address: CODE 0000014E - 000001C5 (0x78 bytes), align: 1
  Segment part 10.
           ENTRY                   ADDRESS         REF BY
           =====                   =======         ======
           duty_cycle              0000014E        main (main_natural_PWM2)
               stack 1 = 00000000 ( 00000004 )
    -------------------------------------------------------------------------
NEAR_ID
  Relative segment, address: CODE 0000078A - 00000802 (0x79 bytes), align: 0
  Segment part 8.             Intra module refs:   tab_sin
    -------------------------------------------------------------------------
INITTAB
  Relative segment, address: CODE 00000080 - 00000085 (0x6 bytes), align: 0
  Segment part 9.             Intra module refs:   DeadTime (main_natural_PWM2)
                                                   OmegaTe (main_natural_PWM2)