abstract.txt

来自「keilc pic的版本 才搞到的 希望对大家有帮助」· 文本 代码 · 共 40 行

Monitor for Phytec uM165

You need under Options - L166 Misc RESERVE:
  8H-0BH, 0ACH-0AFH

For correct using the Monitor with a Phytec 
developent board:
connect the PC COM port to P1 connector

Jumper Settings of the development board:

XX = jumper     O = free pin

O O O O O O O O O O O O O O O O O X X O O O O O O O O O O X O O O
O O O O O O O O O O O O O O O O O O O O O O O X X X X O O X O X X
JP20                                                        

JP9 = open
JP1 = closed between 2+3

Simultaneously press the Reset (S1) and Boot (S2) switches on the
Development Board, first releasing the Reset (S1) and then, two or
three seconds later, release the Boot (S2) switch.
This sequence of pressing and releasing the Reset (S1) and Boot (S2)
switches renders the microMODUL-165 into the Bootstrap mode.


BOOTSTRAP MODE
==============

Memory map:
 00:0000h - 00:EFFFh  free RAM
 00:F000h - 00:FFFFh  internal RAM and SFR's
 01:0000h - 0F:E9FFh  free RAM (optional)
 0F:EA00h - 0F:EBFFh  RAM used by Monitor (Data Area)
 0F:EC00h - 0F:FFFFh  RAM used by Monitor (Code Area)
 10:0000h - 1F:FFFFh  Flash