opclient.bpr

C++ Builder 版的opc and enum

# ---------------------------------------------------------------------------
!if !$d(BCB)
BCB = $(MAKEDIR)\..
!endif

# ---------------------------------------------------------------------------
# IDE SECTION
# ---------------------------------------------------------------------------
# The following section of the project makefile is managed by the BCB IDE.
# It is recommended to use the IDE to change any of the values in this
# section.
# ---------------------------------------------------------------------------

VERSION = BCB.04.04
# ---------------------------------------------------------------------------
PROJECT = OPClient.exe
OBJFILES = OPClient.obj opc\Opcda_i.obj opc\Opccomn_i.obj DataCallbackSink.obj atlprj.obj \
  opc\opcda_cats.obj opc\opcenum_clsid.obj Main.obj
RESFILES = OPClient.res
DEFFILE =
RESDEPEN = $(RESFILES) Main.dfm
LIBFILES =
LIBRARIES = vclnp40.lib rxdb4.lib rxctl4.lib vcldb40.lib vclx40.lib vcl40.lib
SPARELIBS = vcl40.lib vclx40.lib vcldb40.lib rxctl4.lib rxdb4.lib
PACKAGES = vclx40.bpi vcl40.bpi vcldb40.bpi vcldbx40.bpi bcbsmp40.bpi dclocx40.bpi \
  qrpt40.bpi teeui40.bpi teedb40.bpi tee40.bpi ibsmp40.bpi dss40.bpi nmfast40.bpi \
  inetdb40.bpi inet40.bpi vclmid40.bpi rxctl4.bpi rxdb4.bpi
# ---------------------------------------------------------------------------
PATHCPP = .;opc
PATHPAS = .;
PATHASM = .;
PATHRC = .;
DEBUGLIBPATH = $(BCB)\lib\debug
RELEASELIBPATH = $(BCB)\lib\release
SYSDEFINES = NO_STRICT;USING_ATLVCL;_ATL_SINGLE_THREADED
USERDEFINES = USING_ATLVCL;_ATL_SINGLE_THREADED
# ---------------------------------------------------------------------------
CFLAG1 = -Iopc;$(BCB)\include;$(BCB)\include\atl;$(BCB)\include\vcl;"..\..\program files\borland\CBuilder4\Imports";"..\..\Program Files\Borland\RX\Units" \
  -Od -Hc -H=$(BCB)\lib\vcl40.csm -w -Ve -Tkh30000 -r- -a8 -k -y -v -vi- \
  -D$(SYSDEFINES);$(USERDEFINES) -c -b- -w-par -w-inl -Vx -tW -tWM
CFLAG2 =
CFLAG3 =
PFLAGS = -Uopc;$(BCB)\Lib;$(BCB)\lib\obj;$(BCB)\Projects\Lib;"..\..\Program Files\Borland\CBuilder4\Imports";"..\..\Program Files\Borland\RX\Units";$(RELEASELIBPATH) \
  -Iopc;$(BCB)\include;$(BCB)\include\atl;$(BCB)\include\vcl;"..\..\program files\borland\CBuilder4\Imports";"..\..\Program Files\Borland\RX\Units" \
  -DUSING_ATLVCL;_ATL_SINGLE_THREADED -$YD -$W -$O- -v -M -JPHNE
RFLAGS = -iopc;$(BCB)\include;$(BCB)\include\atl;$(BCB)\include\vcl;"..\..\program files\borland\CBuilder4\Imports";"..\..\Program Files\Borland\RX\Units" \
  -DUSING_ATLVCL;_ATL_SINGLE_THREADED
AFLAGS = /iopc /i$(BCB)\include /i$(BCB)\include\atl /i$(BCB)\include\vcl \
  /i"..\..\program files\borland\CBuilder4\Imports" \
  /i"..\..\Program Files\Borland\RX\Units" /dUSING_ATLVCL /d_ATL_SINGLE_THREADED \
  /mx /w2 /zd
LFLAGS = -Lopc;$(BCB)\Lib;$(BCB)\lib\obj;$(BCB)\Projects\Lib;"..\..\Program Files\Borland\CBuilder4\Imports";"..\..\Program Files\Borland\RX\Units";$(RELEASELIBPATH) \
  -aa -Tpe -x -Gn -v
IFLAGS =
# ---------------------------------------------------------------------------
ALLOBJ = c0w32.obj sysinit.obj $(OBJFILES)
ALLRES = $(RESFILES)
ALLLIB = $(LIBFILES) $(LIBRARIES) import32.lib cp32mt.lib
# ---------------------------------------------------------------------------
!ifdef IDEOPTIONS

[Version Info]
IncludeVerInfo=0
AutoIncBuild=0
MajorVer=1
MinorVer=0
Release=0
Build=0
Debug=0
PreRelease=0
Special=0
Private=0
DLL=0
Locale=1033
CodePage=1252

[Version Info Keys]
CompanyName=
FileDescription=
FileVersion=1.0.0.0
InternalName=
LegalCopyright=
LegalTrademarks=
OriginalFilename=
ProductName=
ProductVersion=1.0.0.0
Comments=

[Deployment]
DeployDir=
DeployURL=
HTMLDir=
CABCompress=0
CodeSign=0
IncludeVerInfo=1
AutoIncRelease=0
DeployPackages=1
DeployFiles=1
CompanyURL=
Description=
CredFile=
PrivKey=
CryptoType=0
Timestamping=0
TimestampServer=

[HistoryLists\hlIncludePath]
Count=12
Item0=opc;$(BCB)\include;$(BCB)\include\atl;$(BCB)\include\vcl;..\..\program files\borland\CBuilder4\Imports;..\..\Program Files\Borland\RX\Units
Item1=opc;$(BCB)\include;$(BCB)\include\vcl;$(BCB)\include\atl;..\..\program files\borland\CBuilder4\Imports;..\..\Program Files\Borland\RX\Units
Item2=$(BCB)\include;$(BCB)\include\vcl;$(BCB)\include\atl;..\..\program files\borland\CBuilder4\Imports;..\..\Program Files\Borland\RX\Units;.\opc
Item3=$(BCB)\include;$(BCB)\include\vcl;$(BCB)\include\atl;e:\program files\borland\CBuilder4\Imports\;E:\Program Files\Borland\RX\UnitsItem1=$(BCB)\include;$(BCB)\include\vcl;$(BCB)\include\atl;e:\program files\borland\CBuilder4\Imports\;E:\Program Files\Borland\RX\UnitsItem1=$(BCB)\include;$(BCB)\include\vcl;$(BCB)\include\atl;e:\program files\borland\CBuilder4\Imports;E:\Program Files\Borland\RX\Units
Item4=
Item5=
Item6=$(BCB)\include;$(BCB)\include\vcl;$(BCB)\include\atl;$(BCB)\Imports;e:\Program Files\Borland\rx\units
Item7=$(BCB)\include;$(BCB)\include\vcl;$(BCB)\include\atl;$(BCB)\Imports\;c:\delphi\rx\units
Item8=e:\program files\borland\CBuilder4\Imports;e:\program files\borland\CBuilder4\Imports\;..\..\..\..\delphi\rx\units;d:\program files\borland\cbuilder3\bin\;d:\program files\borland\cbuilder3\lib\;$(BCB)\include;$(BCB)\include\vcl;$(BCB)\include\atl;c:\delphi\rx\units
Item9=e:\program files\borland\CBuilder4\Imports;..\..\..\..\delphi\rx\units;d:\program files\borland\cbuilder3\bin;d:\program files\borland\cbuilder3\lib;$(BCB)\include;$(BCB)\include\vcl;$(BCB)\include;$(BCB)\include\atl
Item10=..\..\..\..\delphi\rx\units;d:\program files\borland\cbuilder3\bin;d:\program files\borland\cbuilder3\lib;$(BCB)\include;$(BCB)\include\vcl;$(BCB)\include;$(BCB)\include\atl
Item11=d:\program files\borland\cbuilder3\lib;$(BCB)\include;$(BCB)\include\vcl;$(BCB)\include;$(BCB)\include\atl

[HistoryLists\hlLibraryPath]
Count=11
Item0=opc;$(BCB)\Lib;$(BCB)\lib\obj;$(BCB)\Projects\Lib;..\..\Program Files\Borland\CBuilder4\Imports;..\..\Program Files\Borland\RX\Units
Item1=$(BCB)\Lib;$(BCB)\lib\obj;$(BCB)\Projects\Lib;..\..\Program Files\Borland\CBuilder4\Imports;..\..\Program Files\Borland\RX\Units
Item2=$(BCB)\Lib;$(BCB)\lib\obj;$(BCB)\Projects\Lib;E:\Program Files\Borland\CBuilder4\Imports\;E:\Program Files\Borland\RX\UnitsItem1=$(BCB)\Lib;$(BCB)\lib\obj;$(BCB)\Projects\Lib;E:\Program Files\Borland\CBuilder4\Imports\;E:\Program Files\Borland\RX\UnitsItem1=$(BCB)\Projects\Lib;$(BCB)\lib\obj;E:\Program Files\Borland\CBuilder4\Imports;E:\Program Files\Borland\RX\Units
Item3=
Item4=
Item5=e:\program files\borland\CBuilder4\Imports;e:\program files\borland\CBuilder4\Imports\;$(BCB)\Projects\Lib;d:\program files\borland\cbuilder3\bin\;d:\program files\borland\cbuilder3\lib\;..\..\..\..\delphi\rx\units;$(BCB)\lib\obj;$(BCB)\libl;e:\Program Files\Borland\rx\units
Item6=e:\program files\borland\CBuilder4\Imports
Item7=e:\program files\borland\CBuilder4\Imports;e:\program files\borland\CBuilder4\Imports\;$(BCB)\Projects\Lib;d:\program files\borland\cbuilder3\bin\;d:\program files\borland\cbuilder3\lib\;..\..\..\..\delphi\rx\units;$(BCB)\lib\obj;$(BCB)\libl;c:\delphi\rx\units
Item8=e:\program files\borland\CBuilder4\Imports;$(BCB)\Projects\Lib;d:\program files\borland\cbuilder3\bin;d:\program files\borland\cbuilder3\lib;..\..\..\..\delphi\rx\units;$(BCB)\lib\obj;$(BCB)\lib
Item9=d:\program files\borland\cbuilder3\bin;d:\program files\borland\cbuilder3\lib;..\..\..\..\delphi\rx\units;$(BCB)\lib\obj;$(BCB)\lib
Item10=d:\program files\borland\cbuilder3\lib;..\..\..\..\delphi\rx\units;$(BCB)\lib\obj;$(BCB)\lib

[HistoryLists\hlDebugSourcePath]
Count=1
Item0=$(BCB)\source\vcl

[HistoryLists\hlConditionals]
Count=4
Item0=USING_ATLVCL;_ATL_SINGLE_THREADED
Item1=USING_ATLVCL;NO_IMPLICIT_NAMESPACE_USE;_ATL_SINGLE_THREADED
Item2=USING_ATLVCL,NO_IMPLICIT_NAMESPACE_USE
Item3=_RTLDLL;USEPACKAGES;USING_ATLVCL

[Debugging]
DebugSourceDirs=$(BCB)\source\vcl

[Parameters]
RunParams=
HostApplication=
RemoteHost=
RemotePath=
RemoteDebug=0

[Compiler]
InMemoryExe=0
ShowInfoMsgs=0

!endif

# ---------------------------------------------------------------------------
# MAKE SECTION
# ---------------------------------------------------------------------------
# This section of the project file is not used by the BCB IDE.  It is for
# the benefit of building from the command-line using the MAKE utility.
# ---------------------------------------------------------------------------

.autodepend
# ---------------------------------------------------------------------------
!if !$d(BCC32)
BCC32 = bcc32
!endif

!if !$d(DCC32)
DCC32 = dcc32
!endif

!if !$d(TASM32)
TASM32 = tasm32
!endif

!if !$d(LINKER)
LINKER = ilink32
!endif

!if !$d(BRCC32)
BRCC32 = brcc32
!endif
# ---------------------------------------------------------------------------
!if $d(PATHCPP)
.PATH.CPP = $(PATHCPP)
.PATH.C   = $(PATHCPP)
!endif

!if $d(PATHPAS)
.PATH.PAS = $(PATHPAS)
!endif

!if $d(PATHASM)
.PATH.ASM = $(PATHASM)
!endif

!if $d(PATHRC)
.PATH.RC  = $(PATHRC)
!endif
# ---------------------------------------------------------------------------
$(PROJECT): $(OBJFILES) $(RESDEPEN) $(DEFFILE)
    $(BCB)\BIN\$(LINKER) @&&!
    $(LFLAGS) +
    $(ALLOBJ), +
    $(PROJECT),, +
    $(ALLLIB), +
    $(DEFFILE), +
    $(ALLRES)
!
# ---------------------------------------------------------------------------
.pas.hpp:
    $(BCB)\BIN\$(DCC32) $(PFLAGS) {$< }

.pas.obj:
    $(BCB)\BIN\$(DCC32) $(PFLAGS) {$< }

.cpp.obj:
    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(CFLAG2) $(CFLAG3) -n$(@D) {$< }

.c.obj:
    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(CFLAG2) $(CFLAG3) -n$(@D) {$< }

.asm.obj:
    $(BCB)\BIN\$(TASM32) $(AFLAGS) $<, $@

.rc.res:
    $(BCB)\BIN\$(BRCC32) $(RFLAGS) -fo$@ $<
# ---------------------------------------------------------------------------