makefile

S3c2510下的VXWORKS的BSP源代码（包括了以太网、串口、USB等等驱动）

# Makefile - make rules for target/config/smdk2510
#
# Copyright 1999-2000 Wind River Systems, Inc.
# Copyright 1999-2000 ARM Limited
# Copyright 2002 SAMSUNG ELECTRONICS
#
# modification history
# --------------------
# 01b,17July02,jwchoi
# 01a,08feb02,ljm  created from 01g of integrator940t.
#
# DESCRIPTION
# This file contains rules for building VxWorks for the SAMSUNG S3C2510
# fited with an ARM940T core module.
#
# INCLUDES
#     makeTarget
#*/

CPU		= ARMARCH4
TOOL		= gnu
EXTRA_DEFINE	= -Wcomment -DCPU_940T \
		  -DARMMMU=ARMMMU_940T -DARMCACHE=ARMCACHE_940T

TGT_DIR = $(WIND_BASE)/target

include $(TGT_DIR)/h/make/defs.bsp
include $(TGT_DIR)/h/make/make.$(CPU)$(TOOL)
include $(TGT_DIR)/h/make/defs.$(WIND_HOST_TYPE)

## Only redefine make definitions below this point, or your definitions will
## be overwritten by the makefile stubs above.

TARGET_DIR	= smdk2510
VENDOR		= SAMSUNG
BOARD		= SMDK2510

#
# The constants ROM_TEXT_ADRS, ROM_SIZE, and RAM_HIGH_ADRS are defined
# in config.h and Makefile.
# All definitions for these constants must be identical.
#

ROM_TEXT_ADRS	= 80000000 # ROM entry address
ROM_SIZE	= 00080000 # number of bytes of ROM space

RAM_LOW_ADRS	= 00001000 # RAM text/data address
RAM_HIGH_ADRS	= 00600000 # RAM text/data address

MACH_EXTRA      = s3c2510Eth.o s3c2510Des.o s3c2510Usb.o usrApp.o diag.o

# relocate the rom image to offset by ROM_TEXT_ADRS - RAM_LOW_ADRS
HEX_FLAGS	= -v --adjust-vma 0X7FFFF000
VMA_FLAGS       = -O srec --set-start=$(VMA_START)

## Only redefine make definitions above this point, or the expansion of
## makefile target dependencies may be incorrect.

include $(TGT_DIR)/h/make/rules.bsp
include $(TGT_DIR)/h/make/rules.$(WIND_HOST_TYPE)