chrp_setup.c

一个2.4.21版本的嵌入式linux内核

/*
 *  arch/ppc/platforms/setup.c
 *
 *  Copyright (C) 1995  Linus Torvalds
 *  Adapted from 'alpha' version by Gary Thomas
 *  Modified by Cort Dougan ([e-mail])
 */

/*
 * bootup setup stuff..
 */

#include <linux/config.h>
#include <linux/errno.h>
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/stddef.h>
#include <linux/unistd.h>
#include <linux/ptrace.h>
#include <linux/slab.h>
#include <linux/user.h>
#include <linux/a.out.h>
#include <linux/tty.h>
#include <linux/major.h>
#include <linux/interrupt.h>
#include <linux/reboot.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/version.h>
#include <linux/adb.h>
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/ide.h>
#include <linux/irq.h>
#include <linux/console.h>
#include <linux/seq_file.h>

#include <asm/processor.h>
#include <asm/io.h>
#include <asm/pgtable.h>
#include <asm/prom.h>
#include <asm/gg2.h>
#include <asm/pci-bridge.h>
#include <asm/dma.h>
#include <asm/machdep.h>
#include <asm/irq.h>
#include <asm/hydra.h>
#include <asm/keyboard.h>
#include <asm/sections.h>
#include <asm/time.h>
#include <asm/btext.h>
#include <asm/i8259.h>
#include <asm/open_pic.h>

#ifdef CONFIG_SERIAL
#include <linux/serial.h>
#include <linux/serialP.h>
#endif

unsigned long chrp_get_rtc_time(void);
int chrp_set_rtc_time(unsigned long nowtime);
void chrp_calibrate_decr(void);
long chrp_time_init(void);

void chrp_find_bridges(void);
void chrp_event_scan(void);
void rtas_display_progress(char *, unsigned short);
void rtas_indicator_progress(char *, unsigned short);
void btext_progress(char *, unsigned short);

extern unsigned long pmac_find_end_of_memory(void);
extern int pckbd_setkeycode(unsigned int scancode, unsigned int keycode);
extern int pckbd_getkeycode(unsigned int scancode);
extern int pckbd_translate(unsigned char scancode, unsigned char *keycode,
			   char raw_mode);
extern char pckbd_unexpected_up(unsigned char keycode);
extern void pckbd_leds(unsigned char leds);
extern void pckbd_init_hw(void);
extern unsigned char pckbd_sysrq_xlate[128];
extern void select_adb_keyboard(void);
extern int of_show_percpuinfo(struct seq_file *, int);

extern kdev_t boot_dev;

extern unsigned long loops_per_jiffy;

static int max_width __chrpdata;
int chrp_is_briq __chrpdata;
unsigned int* briq_SPOR __chrpdata; /* To be replaced by RTAS when available */

#ifdef CONFIG_SMP
extern struct smp_ops_t chrp_smp_ops;
#endif

static const char *gg2_memtypes[4] = {
	"FPM", "SDRAM", "EDO", "BEDO"
};
static const char *gg2_cachesizes[4] = {
	"256 KB", "512 KB", "1 MB", "Reserved"
};
static const char *gg2_cachetypes[4] = {
	"Asynchronous", "Reserved", "Flow-Through Synchronous",
	"Pipelined Synchronous"
};
static const char *gg2_cachemodes[4] = {
	"Disabled", "Write-Through", "Copy-Back", "Transparent Mode"
};

int __chrp
chrp_show_cpuinfo(struct seq_file *m)
{
	int i, sdramen;
	unsigned int t;
	struct device_node *root;
	const char *model = "";

	root = find_path_device("/");
	if (root)
		model = get_property(root, "model", NULL);
	seq_printf(m, "machine\t\t: CHRP %s\n", model);

	/* longtrail (goldengate) stuff */
	if (!strncmp(model, "IBM,LongTrail", 13)) {
		/* VLSI VAS96011/12 `Golden Gate 2' */
		/* Memory banks */
		sdramen = (in_le32((unsigned *)(gg2_pci_config_base+
						GG2_PCI_DRAM_CTRL))
			   >>31) & 1;
		for (i = 0; i < (sdramen ? 4 : 6); i++) {
			t = in_le32((unsigned *)(gg2_pci_config_base+
						 GG2_PCI_DRAM_BANK0+
						 i*4));
			if (!(t & 1))
				continue;
			switch ((t>>8) & 0x1f) {
			case 0x1f:
				model = "4 MB";
				break;
			case 0x1e:
				model = "8 MB";
				break;
			case 0x1c:
				model = "16 MB";
				break;
			case 0x18:
				model = "32 MB";
				break;
			case 0x10:
				model = "64 MB";
				break;
			case 0x00:
				model = "128 MB";
				break;
			default:
				model = "Reserved";
				break;
			}
			seq_printf(m, "memory bank %d\t: %s %s\n", i, model,
				   gg2_memtypes[sdramen ? 1 : ((t>>1) & 3)]);
		}
		/* L2 cache */
		t = in_le32((unsigned *)(gg2_pci_config_base+GG2_PCI_CC_CTRL));
		seq_printf(m, "board l2\t: %s %s (%s)\n",
			   gg2_cachesizes[(t>>7) & 3],
			   gg2_cachetypes[(t>>2) & 3],
			   gg2_cachemodes[t & 3]);
	}
	return 0;
}

/*
 *  Fixes for the National Semiconductor PC78308VUL SuperI/O
 *
 *  Some versions of Open Firmware incorrectly initialize the IRQ settings
 *  for keyboard and mouse
 */
static inline void __init sio_write(u8 val, u8 index)
{
	outb(index, 0x15c);
	outb(val, 0x15d);
}

static inline u8 __init sio_read(u8 index)
{
	outb(index, 0x15c);
	return inb(0x15d);
}

static void __init sio_fixup_irq(const char *name, u8 device, u8 level,
				     u8 type)
{
	u8 level0, type0, active;

	/* select logical device */
	sio_write(device, 0x07);
	active = sio_read(0x30);
	level0 = sio_read(0x70);
	type0 = sio_read(0x71);
	if (level0 != level || type0 != type || !active) {
		printk(KERN_WARNING "sio: %s irq level %d, type %d, %sactive: "
		       "remapping to level %d, type %d, active\n",
		       name, level0, type0, !active ? "in" : "", level, type);
		sio_write(0x01, 0x30);
		sio_write(level, 0x70);
		sio_write(type, 0x71);
	}
}

static void __init sio_init(void)
{
	struct device_node *root;

	if ((root = find_path_device("/")) &&
	    !strncmp(get_property(root, "model", NULL), "IBM,LongTrail", 13)) {
		/* logical device 0 (KBC/Keyboard) */
		sio_fixup_irq("keyboard", 0, 1, 2);
		/* select logical device 1 (KBC/Mouse) */
		sio_fixup_irq("mouse", 1, 12, 2);
	}
}


void __init
chrp_setup_arch(void)
{
	struct device_node *device;

	/* init to some ~sane value until calibrate_delay() runs */
	loops_per_jiffy = 50000000/HZ;

#ifdef CONFIG_BLK_DEV_INITRD
	/* this is fine for chrp */
	initrd_below_start_ok = 1;
	
	if (initrd_start)
		ROOT_DEV = MKDEV(RAMDISK_MAJOR, 0);
	else
#endif
		ROOT_DEV = to_kdev_t(0x0802); /* sda2 (sda1 is for the kernel) */

	/* Lookup PCI host bridges */
	chrp_find_bridges();

#ifndef CONFIG_PPC64BRIDGE
	/*
	 *  Temporary fixes for PCI devices.
	 *  -- Geert
	 */
	hydra_init();		/* Mac I/O */

#endif /* CONFIG_PPC64BRIDGE */

	/*
	 *  Fix the Super I/O configuration
	 */
	sio_init();

	/*
	 *  Setup the console operations
	 */
#ifdef CONFIG_DUMMY_CONSOLE
	conswitchp = &dummy_con;
#endif

	/* Get the event scan rate for the rtas so we know how
	 * often it expects a heartbeat. -- Cort
	 */
	if (rtas_data) {
		struct property *p;
		unsigned long rate, count;
		device = find_devices("rtas");
		for ( p = device->properties;
		      p && strncmp(p->name, "rtas-event-scan-rate", 20);
		      p = p->next )
			/* nothing */ ;
		if (p && (rate = *(unsigned long *)p->value) > 0) {
			/*
			 * The value is the number of times per minute.
			 * For now assign the full workload here to cpu 0.  
			 *
			 * We now split the rate and spread the heartbeats
			 * when we kick secondary cpus so we can spread
			 * the calls evenly.   
			 */
			ppc_md.heartbeat = chrp_event_scan;
			
			count = (60*HZ) / rate;
			if (!count)        /* XXX insane */
				count = 1;

			heartbeat_reset(0) = count;
			heartbeat_count(0) = 1;

			printk("RTAS Event Scan Rate: %lu calls/minute "
			       "(every %lu jiffies)\n", rate, count );
		}
	}

	pci_create_OF_bus_map();
}

void __chrp
chrp_event_scan(void)
{
	unsigned char log[1024];
	unsigned long ret = 0;
	/* XXX: we should loop until the hardware says no more error logs -- Cort */
	call_rtas( "event-scan", 4, 1, &ret, 0xffffffff, 0,
		   __pa(log), 1024 );
}
	
void __chrp
chrp_restart(char *cmd)
{
	printk("RTAS system-reboot returned %d\n",
	       call_rtas("system-reboot", 0, 1, NULL));
	for (;;);
}

void __chrp
chrp_power_off(void)
{
	/* allow power on only with power button press */
	printk("RTAS power-off returned %d\n",
	       call_rtas("power-off", 2, 1, NULL,0xffffffff,0xffffffff));
	for (;;);
}

void __chrp
chrp_halt(void)
{
	chrp_power_off();
}

u_int __chrp
chrp_irq_cannonicalize(u_int irq)
{
	if (irq == 2)
		return 9;