⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 irq.c

📁 一个2.4.21版本的嵌入式linux内核
💻 C
📖 第 1 页 / 共 2 页
字号:
	int retval;	struct irqaction * action;#if 1	/*	 * Sanity-check: shared interrupts should REALLY pass in	 * a real dev-ID, otherwise we'll have trouble later trying	 * to figure out which interrupt is which (messes up the	 * interrupt freeing logic etc).	 */	if (irqflags & SA_SHIRQ) {		if (!dev_id)			printk("Bad boy: %s (at 0x%x) called us without a dev_id!\n", devname, (&irq)[-1]);	}#endif	if (irq >= NR_IRQS)		return -EINVAL;	if (!handler)		return -EINVAL;	action = (struct irqaction *)			kmalloc(sizeof(struct irqaction), GFP_KERNEL);	if (!action)		return -ENOMEM;	action->handler = handler;	action->flags = irqflags;	action->mask = 0;	action->name = devname;	action->next = NULL;	action->dev_id = dev_id;	retval = setup_irq(irq, action);	if (retval)		kfree(action);	return retval;}/** *	free_irq - free an interrupt *	@irq: Interrupt line to free *	@dev_id: Device identity to free * *	Remove an interrupt handler. The handler is removed and if the *	interrupt line is no longer in use by any driver it is disabled. *	On a shared IRQ the caller must ensure the interrupt is disabled *	on the card it drives before calling this function. The function *	does not return until any executing interrupts for this IRQ *	have completed. * *	This function may be called from interrupt context. * *	Bugs: Attempting to free an irq in a handler for the same irq hangs *	      the machine. */void free_irq(unsigned int irq, void *dev_id){	irq_desc_t *desc;	struct irqaction **p;	unsigned long flags;	if (irq >= NR_IRQS)		return;	desc = irq_desc + irq;	spin_lock_irqsave(&desc->lock,flags);	p = &desc->action;	for (;;) {		struct irqaction * action = *p;		if (action) {			struct irqaction **pp = p;			p = &action->next;			if (action->dev_id != dev_id)				continue;			/* Found it - now remove it from the list of entries */			*pp = action->next;			if (!desc->action) {				desc->status |= IRQ_DISABLED;				desc->handler->shutdown(irq);			}			spin_unlock_irqrestore(&desc->lock,flags);#ifdef CONFIG_SMP			/* Wait to make sure it's not being used on another CPU */			while (desc->status & IRQ_INPROGRESS)				barrier();#endif			kfree(action);			return;		}		printk("Trying to free free IRQ%d\n",irq);		spin_unlock_irqrestore(&desc->lock,flags);		return;	}}/* * IRQ autodetection code.. * * This depends on the fact that any interrupt that * comes in on to an unassigned handler will get stuck * with "IRQ_WAITING" cleared and the interrupt * disabled. */static DECLARE_MUTEX(probe_sem);/** *	probe_irq_on	- begin an interrupt autodetect * *	Commence probing for an interrupt. The interrupts are scanned *	and a mask of potential interrupt lines is returned. * */unsigned long probe_irq_on(void){	unsigned int i;	irq_desc_t *desc;	unsigned long val;	unsigned long delay;	down(&probe_sem);	/*	 * something may have generated an irq long ago and we want to	 * flush such a longstanding irq before considering it as spurious.	 */	for (i = NR_IRQS-1; i > 0; i--)  {		desc = irq_desc + i;		spin_lock_irq(&desc->lock);		if (!irq_desc[i].action)			irq_desc[i].handler->startup(i);		spin_unlock_irq(&desc->lock);	}	/* Wait for longstanding interrupts to trigger. */	for (delay = jiffies + HZ/50; time_after(delay, jiffies); )		/* about 20ms delay */ synchronize_irq();	/*	 * enable any unassigned irqs	 * (we must startup again here because if a longstanding irq	 * happened in the previous stage, it may have masked itself)	 */	for (i = NR_IRQS-1; i > 0; i--) {		desc = irq_desc + i;		spin_lock_irq(&desc->lock);		if (!desc->action) {			desc->status |= IRQ_AUTODETECT | IRQ_WAITING;			if (desc->handler->startup(i))				desc->status |= IRQ_PENDING;		}		spin_unlock_irq(&desc->lock);	}	/*	 * Wait for spurious interrupts to trigger	 */	for (delay = jiffies + HZ/10; time_after(delay, jiffies); )		/* about 100ms delay */ synchronize_irq();	/*	 * Now filter out any obviously spurious interrupts	 */	val = 0;	for (i = 0; i < NR_IRQS; i++) {		irq_desc_t *desc = irq_desc + i;		unsigned int status;		spin_lock_irq(&desc->lock);		status = desc->status;		if (status & IRQ_AUTODETECT) {			/* It triggered already - consider it spurious. */			if (!(status & IRQ_WAITING)) {				desc->status = status & ~IRQ_AUTODETECT;				desc->handler->shutdown(i);			} else				if (i < 32)					val |= 1 << i;		}		spin_unlock_irq(&desc->lock);	}	return val;}/* * Return a mask of triggered interrupts (this * can handle only legacy ISA interrupts). *//** *	probe_irq_mask - scan a bitmap of interrupt lines *	@val:	mask of interrupts to consider * *	Scan the ISA bus interrupt lines and return a bitmap of *	active interrupts. The interrupt probe logic state is then *	returned to its previous value. * *	Note: we need to scan all the irq's even though we will *	only return ISA irq numbers - just so that we reset them *	all to a known state. */unsigned int probe_irq_mask(unsigned long val){	int i;	unsigned int mask;	mask = 0;	for (i = 0; i < NR_IRQS; i++) {		irq_desc_t *desc = irq_desc + i;		unsigned int status;		spin_lock_irq(&desc->lock);		status = desc->status;		if (status & IRQ_AUTODETECT) {			if (i < 16 && !(status & IRQ_WAITING))				mask |= 1 << i;			desc->status = status & ~IRQ_AUTODETECT;			desc->handler->shutdown(i);		}		spin_unlock_irq(&desc->lock);	}	up(&probe_sem);	return mask & val;}/* * Return the one interrupt that triggered (this can * handle any interrupt source). *//** *	probe_irq_off	- end an interrupt autodetect *	@val: mask of potential interrupts (unused) * *	Scans the unused interrupt lines and returns the line which *	appears to have triggered the interrupt. If no interrupt was *	found then zero is returned. If more than one interrupt is *	found then minus the first candidate is returned to indicate *	their is doubt. * *	The interrupt probe logic state is returned to its previous *	value. * *	BUGS: When used in a module (which arguably shouldnt happen) *	nothing prevents two IRQ probe callers from overlapping. The *	results of this are non-optimal. */int probe_irq_off(unsigned long val){	int i, irq_found, nr_irqs;	nr_irqs = 0;	irq_found = 0;	for (i = 0; i < NR_IRQS; i++) {		irq_desc_t *desc = irq_desc + i;		unsigned int status;		spin_lock_irq(&desc->lock);		status = desc->status;		if (status & IRQ_AUTODETECT) {			if (!(status & IRQ_WAITING)) {				if (!nr_irqs)					irq_found = i;				nr_irqs++;			}			desc->status = status & ~IRQ_AUTODETECT;			desc->handler->shutdown(i);		}		spin_unlock_irq(&desc->lock);	}	up(&probe_sem);	if (nr_irqs > 1)		irq_found = -irq_found;	return irq_found;}/* this was setup_x86_irq but it seems pretty generic */int setup_irq(unsigned int irq, struct irqaction * new){	int shared = 0;	unsigned long flags;	struct irqaction *old, **p;	irq_desc_t *desc = irq_desc + irq;	/*	 * Some drivers like serial.c use request_irq() heavily,	 * so we have to be careful not to interfere with a	 * running system.	 */	if (new->flags & SA_SAMPLE_RANDOM) {		/*		 * This function might sleep, we want to call it first,		 * outside of the atomic block.		 * Yes, this might clear the entropy pool if the wrong		 * driver is attempted to be loaded, without actually		 * installing a new handler, but is this really a problem,		 * only the sysadmin is able to do this.		 */		rand_initialize_irq(irq);	}	/*	 * The following block of code has to be executed atomically	 */	spin_lock_irqsave(&desc->lock,flags);	p = &desc->action;	if ((old = *p) != NULL) {		/* Can't share interrupts unless both agree to */		if (!(old->flags & new->flags & SA_SHIRQ)) {			spin_unlock_irqrestore(&desc->lock,flags);			return -EBUSY;		}		/* add new interrupt at end of irq queue */		do {			p = &old->next;			old = *p;		} while (old);		shared = 1;	}	*p = new;	if (!shared) {		desc->depth = 0;		desc->status &= ~(IRQ_DISABLED | IRQ_AUTODETECT | IRQ_WAITING);		desc->handler->startup(irq);	}	spin_unlock_irqrestore(&desc->lock,flags);	register_irq_proc(irq);	return 0;}void __init init_generic_irq(void){	int i;	for (i = 0; i < NR_IRQS; i++) {		irq_desc[i].status  = IRQ_DISABLED;		irq_desc[i].action  = NULL;		irq_desc[i].depth   = 1;		irq_desc[i].handler = &no_irq_type;	}}EXPORT_SYMBOL(disable_irq_nosync);EXPORT_SYMBOL(disable_irq);EXPORT_SYMBOL(enable_irq);EXPORT_SYMBOL(probe_irq_mask);static struct proc_dir_entry * root_irq_dir;static struct proc_dir_entry * irq_dir [NR_IRQS];#define HEX_DIGITS 8static unsigned int parse_hex_value (const char *buffer,		unsigned long count, unsigned long *ret){	unsigned char hexnum [HEX_DIGITS];	unsigned long value;	int i;	if (!count)		return -EINVAL;	if (count > HEX_DIGITS)		count = HEX_DIGITS;	if (copy_from_user(hexnum, buffer, count))		return -EFAULT;	/*	 * Parse the first 8 characters as a hex string, any non-hex char	 * is end-of-string. '00e1', 'e1', '00E1', 'E1' are all the same.	 */	value = 0;	for (i = 0; i < count; i++) {		unsigned int c = hexnum[i];		switch (c) {			case '0' ... '9': c -= '0'; break;			case 'a' ... 'f': c -= 'a'-10; break;			case 'A' ... 'F': c -= 'A'-10; break;		default:			goto out;		}		value = (value << 4) | c;	}out:	*ret = value;	return 0;}#if CONFIG_SMPstatic struct proc_dir_entry * smp_affinity_entry [NR_IRQS];static unsigned long irq_affinity [NR_IRQS] = { [0 ... NR_IRQS-1] = ~0UL };static int irq_affinity_read_proc (char *page, char **start, off_t off,			int count, int *eof, void *data){	if (count < HEX_DIGITS+1)		return -EINVAL;	return sprintf (page, "%08lx\n", irq_affinity[(long)data]);}static int irq_affinity_write_proc (struct file *file, const char *buffer,					unsigned long count, void *data){	int irq = (long) data, full_count = count, err;	unsigned long new_value;	if (!irq_desc[irq].handler->set_affinity)		return -EIO;	err = parse_hex_value(buffer, count, &new_value);	/*	 * Do not allow disabling IRQs completely - it's a too easy	 * way to make the system unusable accidentally :-) At least	 * one online CPU still has to be targeted.	 */	if (!(new_value & cpu_online_map))		return -EINVAL;	irq_affinity[irq] = new_value;	irq_desc[irq].handler->set_affinity(irq, new_value);	return full_count;}#endifstatic int prof_cpu_mask_read_proc (char *page, char **start, off_t off,			int count, int *eof, void *data){	unsigned long *mask = (unsigned long *) data;	if (count < HEX_DIGITS+1)		return -EINVAL;	return sprintf (page, "%08lx\n", *mask);}static int prof_cpu_mask_write_proc (struct file *file, const char *buffer,					unsigned long count, void *data){	unsigned long *mask = (unsigned long *) data, full_count = count, err;	unsigned long new_value;	err = parse_hex_value(buffer, count, &new_value);	if (err)		return err;	*mask = new_value;	return full_count;}#define MAX_NAMELEN 10static void register_irq_proc (unsigned int irq){	char name [MAX_NAMELEN];	if (!root_irq_dir || (irq_desc[irq].handler == &no_irq_type) ||			irq_dir[irq])		return;	memset(name, 0, MAX_NAMELEN);	sprintf(name, "%d", irq);	/* create /proc/irq/1234 */	irq_dir[irq] = proc_mkdir(name, root_irq_dir);#if CONFIG_SMP	{		struct proc_dir_entry *entry;		/* create /proc/irq/1234/smp_affinity */		entry = create_proc_entry("smp_affinity", 0600, irq_dir[irq]);		if (entry) {			entry->nlink = 1;			entry->data = (void *)(long)irq;			entry->read_proc = irq_affinity_read_proc;			entry->write_proc = irq_affinity_write_proc;		}		smp_affinity_entry[irq] = entry;	}#endif}unsigned long prof_cpu_mask = -1;void init_irq_proc (void){	struct proc_dir_entry *entry;	int i;	/* create /proc/irq */	root_irq_dir = proc_mkdir("irq", 0);	/* create /proc/irq/prof_cpu_mask */	entry = create_proc_entry("prof_cpu_mask", 0600, root_irq_dir);	if (!entry)	    return;	entry->nlink = 1;	entry->data = (void *)&prof_cpu_mask;	entry->read_proc = prof_cpu_mask_read_proc;	entry->write_proc = prof_cpu_mask_write_proc;	/*	 * Create entries for all existing IRQs.	 */	for (i = 0; i < NR_IRQS; i++)		register_irq_proc(i);}

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -