makefile.in

用于嵌入式Linux系统的标准C的库函数

distclean-libtool:

maintainer-clean-libtool:

libpthread.a: $(libpthread_a_OBJECTS) $(libpthread_a_DEPENDENCIES)
	-rm -f libpthread.a
	$(AR) cru libpthread.a $(libpthread_a_OBJECTS) $(libpthread_a_LIBADD)
	$(RANLIB) libpthread.a

libthread_db.a: $(libthread_db_a_OBJECTS) $(libthread_db_a_DEPENDENCIES)
	-rm -f libthread_db.a
	$(AR) cru libthread_db.a $(libthread_db_a_OBJECTS) $(libthread_db_a_LIBADD)
	$(RANLIB) libthread_db.a

mostlyclean-toollibLTLIBRARIES:

clean-toollibLTLIBRARIES:
	-test -z "$(toollib_LTLIBRARIES)" || rm -f $(toollib_LTLIBRARIES)

distclean-toollibLTLIBRARIES:

maintainer-clean-toollibLTLIBRARIES:

install-toollibLTLIBRARIES: $(toollib_LTLIBRARIES)
	@$(NORMAL_INSTALL)
	$(mkinstalldirs) $(DESTDIR)$(toollibdir)
	@list='$(toollib_LTLIBRARIES)'; for p in $$list; do \
	  if test -f $$p; then \
	    echo "$(LIBTOOL)  --mode=install $(INSTALL) $$p $(DESTDIR)$(toollibdir)/$$p"; \
	    $(LIBTOOL)  --mode=install $(INSTALL) $$p $(DESTDIR)$(toollibdir)/$$p; \
	  else :; fi; \
	done

uninstall-toollibLTLIBRARIES:
	@$(NORMAL_UNINSTALL)
	list='$(toollib_LTLIBRARIES)'; for p in $$list; do \
	  $(LIBTOOL)  --mode=uninstall rm -f $(DESTDIR)$(toollibdir)/$$p; \
	done

libpthread.la: $(libpthread_la_OBJECTS) $(libpthread_la_DEPENDENCIES)
	$(LINK) -rpath $(toollibdir) $(libpthread_la_LDFLAGS) $(libpthread_la_OBJECTS) $(libpthread_la_LIBADD) $(LIBS)

libthread_db.la: $(libthread_db_la_OBJECTS) $(libthread_db_la_DEPENDENCIES)
	$(LINK) -rpath $(toollibdir) $(libthread_db_la_LDFLAGS) $(libthread_db_la_OBJECTS) $(libthread_db_la_LIBADD) $(LIBS)

# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
#     (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.

@SET_MAKE@

all-recursive install-data-recursive install-exec-recursive \
installdirs-recursive install-recursive uninstall-recursive install-info-recursive \
check-recursive installcheck-recursive info-recursive dvi-recursive:
	@set fnord $(MAKEFLAGS); amf=$$2; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

mostlyclean-recursive clean-recursive distclean-recursive \
maintainer-clean-recursive:
	@set fnord $(MAKEFLAGS); amf=$$2; \
	dot_seen=no; \
	rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
	  rev="$$subdir $$rev"; \
	  test "$$subdir" != "." || dot_seen=yes; \
	done; \
	test "$$dot_seen" = "no" && rev=". $$rev"; \
	target=`echo $@ | sed s/-recursive//`; \
	for subdir in $$rev; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
	done && test -z "$$fail"
tags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
	done

tags: TAGS

ID: $(HEADERS) $(SOURCES) $(LISP)
	list='$(SOURCES) $(HEADERS)'; \
	unique=`for i in $$list; do echo $$i; done | \
	  awk '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	here=`pwd` && cd $(srcdir) \
	  && mkid -f$$here/ID $$unique $(LISP)

TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
	tags=; \
	here=`pwd`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
   if test "$$subdir" = .; then :; else \
	    test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
   fi; \
	done; \
	list='$(SOURCES) $(HEADERS)'; \
	unique=`for i in $$list; do echo $$i; done | \
	  awk '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)

mostlyclean-tags:

clean-tags:

distclean-tags:
	-rm -f TAGS ID

maintainer-clean-tags:

distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)

# This target untars the dist file and tries a VPATH configuration.  Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
	-rm -rf $(distdir)
	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
	mkdir $(distdir)/=build
	mkdir $(distdir)/=inst
	dc_install_base=`cd $(distdir)/=inst && pwd`; \
	cd $(distdir)/=build \
	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
	  && $(MAKE) $(AM_MAKEFLAGS) \
	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
	  && $(MAKE) $(AM_MAKEFLAGS) check \
	  && $(MAKE) $(AM_MAKEFLAGS) install \
	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
	  && $(MAKE) $(AM_MAKEFLAGS) dist
	-rm -rf $(distdir)
	@banner="$(distdir).tar.gz is ready for distribution"; \
	dashes=`echo "$$banner" | sed s/./=/g`; \
	echo "$$dashes"; \
	echo "$$banner"; \
	echo "$$dashes"
dist: distdir
	-chmod -R a+r $(distdir)
	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
	-rm -rf $(distdir)
dist-all: distdir
	-chmod -R a+r $(distdir)
	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
	-rm -rf $(distdir)
distdir: $(DISTFILES)
	-rm -rf $(distdir)
	mkdir $(distdir)
	-chmod 777 $(distdir)
	@for file in $(DISTFILES); do \
	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    cp -pr $$d/$$file $(distdir)/$$file; \
	  else \
	    test -f $(distdir)/$$file \
	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
	    || cp -p $$d/$$file $(distdir)/$$file || :; \
	  fi; \
	done
	for subdir in $(SUBDIRS); do \
	  if test "$$subdir" = .; then :; else \
	    test -d $(distdir)/$$subdir \
	    || mkdir $(distdir)/$$subdir \
	    || exit 1; \
	    chmod 777 $(distdir)/$$subdir; \
	    (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \
	      || exit 1; \
	  fi; \
	done
info-am:
info: info-recursive
dvi-am:
dvi: dvi-recursive
check-am:
check: check-recursive
installcheck-am:
installcheck: installcheck-recursive
install-info-am: 
install-info: install-info-recursive
install-exec-am:
install-exec: install-exec-recursive

install-data-am: install-toollibLIBRARIES install-toollibLTLIBRARIES \
		install-data-local
install-data: install-data-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
install: install-recursive
uninstall-am: uninstall-toollibLIBRARIES uninstall-toollibLTLIBRARIES
uninstall: uninstall-recursive
all-am: Makefile $(LIBRARIES) $(LTLIBRARIES) $(DATA)
all-redirect: all-recursive
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
installdirs: installdirs-recursive
installdirs-am:
	$(mkinstalldirs)  $(DESTDIR)$(toollibdir) $(DESTDIR)$(toollibdir)


mostlyclean-generic:

clean-generic:

distclean-generic:
	-rm -f Makefile $(CONFIG_CLEAN_FILES)
	-rm -f config.cache config.log stamp-h stamp-h[0-9]*

maintainer-clean-generic:
mostlyclean-am:  mostlyclean-toollibLIBRARIES mostlyclean-compile \
		mostlyclean-libtool mostlyclean-toollibLTLIBRARIES \
		mostlyclean-tags mostlyclean-generic

mostlyclean: mostlyclean-recursive

clean-am:  clean-toollibLIBRARIES clean-compile clean-libtool \
		clean-toollibLTLIBRARIES clean-tags clean-generic \
		mostlyclean-am

clean: clean-recursive

distclean-am:  distclean-toollibLIBRARIES distclean-compile \
		distclean-libtool distclean-toollibLTLIBRARIES \
		distclean-tags distclean-generic clean-am
	-rm -f libtool

distclean: distclean-recursive
	-rm -f config.status

maintainer-clean-am:  maintainer-clean-toollibLIBRARIES \
		maintainer-clean-compile maintainer-clean-libtool \
		maintainer-clean-toollibLTLIBRARIES \
		maintainer-clean-tags maintainer-clean-generic \
		distclean-am
	@echo "This command is intended for maintainers to use;"
	@echo "it deletes files that may require special tools to rebuild."

maintainer-clean: maintainer-clean-recursive
	-rm -f config.status

.PHONY: mostlyclean-toollibLIBRARIES distclean-toollibLIBRARIES \
clean-toollibLIBRARIES maintainer-clean-toollibLIBRARIES \
uninstall-toollibLIBRARIES install-toollibLIBRARIES mostlyclean-compile \
distclean-compile clean-compile maintainer-clean-compile \
mostlyclean-libtool distclean-libtool clean-libtool \
maintainer-clean-libtool mostlyclean-toollibLTLIBRARIES \
distclean-toollibLTLIBRARIES clean-toollibLTLIBRARIES \
maintainer-clean-toollibLTLIBRARIES uninstall-toollibLTLIBRARIES \
install-toollibLTLIBRARIES install-data-recursive \
uninstall-data-recursive install-exec-recursive \
uninstall-exec-recursive installdirs-recursive uninstalldirs-recursive \
all-recursive check-recursive installcheck-recursive info-recursive \
dvi-recursive mostlyclean-recursive distclean-recursive clean-recursive \
maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
dvi-am dvi check check-am installcheck-am installcheck install-info-am \
install-info install-exec-am install-exec install-data-local \
install-data-am install-data install-am install uninstall-am uninstall \
all-redirect all-am all installdirs-am installdirs mostlyclean-generic \
distclean-generic clean-generic maintainer-clean-generic clean \
mostlyclean distclean maintainer-clean


# objects listed later in LIBPTHREAD_OBJLISTS will override those listed earlier
@USE_LIBTOOL_TRUE@extra-libtool-objlist: $(MACHINE_OBJLIST)
@USE_LIBTOOL_TRUE@	cat $(MACHINE_OBJLIST) | $(AWK) '{ libpthread[$$1] = $$2 }; END { for (x in libpthread) printf ("%s\n", libpthread[x]) }' > $@

objectlist.awk.in: $(noinst_LTLIBRARIES)
	-rm -f objectlist.awk.in
	for i in `ls *.lo` ; \
	do \
	  echo $$i `pwd`/$$i >> objectlist.awk.in ; \
	done

doc:

install-data-local: install-toollibLIBRARIES
	-rm -f $(DESTDIR)$(toollibdir)/libthread_db.so.1
	ln -s $(DESTDIR)$(toollibdir)/libthread_db.so $(DESTDIR)$(toollibdir)/libthread_db.so.1 || cp $(DESTDIR)$(toollibdir)/libthread_db.so $(DESTDIR)$(toollibdir)/libthread_db.so.1 

pt-initfini.s: $(srcdir)/pt-initfini.c
	$(CC) -S $(CFLAGS_pt_initfini) -finhibit-size-directive \
		$(patsubst -f%,-fno-%,$(exceptions)) -o $@

# We only have one kind of startup code files.  Static binaries and
# shared libraries are build using the PIC version.
crti.S: pt-initfini.s
	sed -n -e '1,/@HEADER_ENDS/p' \
	       -e '/@_.*_PROLOG_BEGINS/,/@_.*_PROLOG_ENDS/p' \
	       -e '/@TRAILER_BEGINS/,$$p' $< > $@

defs.h: pt-initfini.s
	sed -n -e '/@TESTS_BEGIN/,/@TESTS_END/p' $< | \
		$(AWK) -f defs.awk > $@

crti.o: crti.S defs.h
	$(CC) -g0 $(ASFLAGS) -o $@

mutex.$(oext): $(srcdir)/mutex.c
	$(LIB_COMPILE) $(CFLAGS_noweak) -c $< -o $@

specific.$(oext): $(srcdir)/specific.c
	$(LIB_COMPILE) $(CFLAGS_noweak) -c $< -o $@

pthread.$(oext): $(srcdir)/pthread.c
	$(LIB_COMPILE) $(CFLAGS_pthread) -c $< -o $@

ptfork.$(oext): $(srcdir)/ptfork.c
	$(LIB_COMPILE) $(CFLAGS_noweak) -c $< -o $@

cancel.$(oext): $(srcdir)/cancel.c
	$(LIB_COMPILE) $(CFLAGS_cancel) -c $< -o $@

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: