📄 ipsec.h
字号:
/* $FreeBSD: src/sys/netinet6/ipsec.h,v 1.9 2002/04/19 04:46:23 suz Exp $ *//* $KAME: ipsec.h,v 1.53 2001/11/20 08:32:38 itojun Exp $ *//* * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the project nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. *//* * IPsec controller part. */#ifndef _NETINET6_IPSEC_H_#define _NETINET6_IPSEC_H_#if defined(_KERNEL) && !defined(_LKM) && !defined(KLD_MODULE)#include "opt_inet.h"#include "opt_ipsec.h"#endif#include <net/pfkeyv2.h>#include <netkey/keydb.h>#ifdef _KERNEL/* * Security Policy Index * Ensure that both address families in the "src" and "dst" are same. * When the value of the ul_proto is ICMPv6, the port field in "src" * specifies ICMPv6 type, and the port field in "dst" specifies ICMPv6 code. */struct secpolicyindex { u_int8_t dir; /* direction of packet flow, see blow */ struct sockaddr_storage src; /* IP src address for SP */ struct sockaddr_storage dst; /* IP dst address for SP */ u_int8_t prefs; /* prefix length in bits for src */ u_int8_t prefd; /* prefix length in bits for dst */ u_int16_t ul_proto; /* upper layer Protocol */#ifdef notyet uid_t uids; uid_t uidd; gid_t gids; gid_t gidd;#endif};/* Security Policy Data Base */struct secpolicy { LIST_ENTRY(secpolicy) chain; int refcnt; /* reference count */ struct secpolicyindex spidx; /* selector */ u_int32_t id; /* It's unique number on the system. */ u_int state; /* 0: dead, others: alive */#define IPSEC_SPSTATE_DEAD 0#define IPSEC_SPSTATE_ALIVE 1 u_int policy; /* DISCARD, NONE or IPSEC, see keyv2.h */ struct ipsecrequest *req; /* pointer to the ipsec request tree, */ /* if policy == IPSEC else this value == NULL.*/ /* * lifetime handler. * the policy can be used without limitiation if both lifetime and * validtime are zero. * "lifetime" is passed by sadb_lifetime.sadb_lifetime_addtime. * "validtime" is passed by sadb_lifetime.sadb_lifetime_usetime. */ long created; /* time created the policy */ long lastused; /* updated every when kernel sends a packet */ long lifetime; /* duration of the lifetime of this policy */ long validtime; /* duration this policy is valid without use */};/* Request for IPsec */struct ipsecrequest { struct ipsecrequest *next; /* pointer to next structure */ /* If NULL, it means the end of chain. */ struct secasindex saidx;/* hint for search proper SA */ /* if __ss_len == 0 then no address specified.*/ u_int level; /* IPsec level defined below. */ struct secasvar *sav; /* place holder of SA for use */ struct secpolicy *sp; /* back pointer to SP */};/* security policy in PCB */struct inpcbpolicy { struct secpolicy *sp_in; struct secpolicy *sp_out; int priv; /* privileged socket ? */};/* SP acquiring list table. */struct secspacq { LIST_ENTRY(secspacq) chain; struct secpolicyindex spidx; long created; /* for lifetime */ int count; /* for lifetime */ /* XXX: here is mbuf place holder to be sent ? */};#endif /* _KERNEL *//* according to IANA assignment, port 0x0000 and proto 0xff are reserved. */#define IPSEC_PORT_ANY 0#define IPSEC_ULPROTO_ANY 255#define IPSEC_PROTO_ANY 255/* mode of security protocol *//* NOTE: DON'T use IPSEC_MODE_ANY at SPD. It's only use in SAD */#define IPSEC_MODE_ANY 0 /* i.e. wildcard. */#define IPSEC_MODE_TRANSPORT 1#define IPSEC_MODE_TUNNEL 2/* * Direction of security policy. * NOTE: Since INVALID is used just as flag. * The other are used for loop counter too. */#define IPSEC_DIR_ANY 0#define IPSEC_DIR_INBOUND 1#define IPSEC_DIR_OUTBOUND 2#define IPSEC_DIR_MAX 3#define IPSEC_DIR_INVALID 4/* Policy level *//* * IPSEC, ENTRUST and BYPASS are allowed for setsockopt() in PCB, * DISCARD, IPSEC and NONE are allowed for setkey() in SPD. * DISCARD and NONE are allowed for system default. */#define IPSEC_POLICY_DISCARD 0 /* discarding packet */#define IPSEC_POLICY_NONE 1 /* through IPsec engine */#define IPSEC_POLICY_IPSEC 2 /* do IPsec */#define IPSEC_POLICY_ENTRUST 3 /* consulting SPD if present. */#define IPSEC_POLICY_BYPASS 4 /* only for privileged socket. *//* Security protocol level */#define IPSEC_LEVEL_DEFAULT 0 /* reference to system default */#define IPSEC_LEVEL_USE 1 /* use SA if present. */#define IPSEC_LEVEL_REQUIRE 2 /* require SA. */#define IPSEC_LEVEL_UNIQUE 3 /* unique SA. */#define IPSEC_MANUAL_REQID_MAX 0x3fff /* * if security policy level == unique, this id * indicate to a relative SA for use, else is * zero. * 1 - 0x3fff are reserved for manual keying. * 0 are reserved for above reason. Others is * for kernel use. * Note that this id doesn't identify SA * by only itself. */#define IPSEC_REPLAYWSIZE 32/* statistics for ipsec processing */struct ipsecstat { u_quad_t in_success; /* succeeded inbound process */ u_quad_t in_polvio; /* security policy violation for inbound process */ u_quad_t in_nosa; /* inbound SA is unavailable */ u_quad_t in_inval; /* inbound processing failed due to EINVAL */ u_quad_t in_nomem; /* inbound processing failed due to ENOBUFS */ u_quad_t in_badspi; /* failed getting a SPI */ u_quad_t in_ahreplay; /* AH replay check failed */ u_quad_t in_espreplay; /* ESP replay check failed */ u_quad_t in_ahauthsucc; /* AH authentication success */ u_quad_t in_ahauthfail; /* AH authentication failure */ u_quad_t in_espauthsucc; /* ESP authentication success */ u_quad_t in_espauthfail; /* ESP authentication failure */ u_quad_t in_esphist[256]; u_quad_t in_ahhist[256]; u_quad_t in_comphist[256]; u_quad_t out_success; /* succeeded outbound process */ u_quad_t out_polvio; /* security policy violation for outbound process */ u_quad_t out_nosa; /* outbound SA is unavailable */ u_quad_t out_inval; /* outbound process failed due to EINVAL */ u_quad_t out_nomem; /* inbound processing failed due to ENOBUFS */ u_quad_t out_noroute; /* there is no route */ u_quad_t out_esphist[256]; u_quad_t out_ahhist[256]; u_quad_t out_comphist[256];};/* * Definitions for IPsec & Key sysctl operations. *//* * Names for IPsec & Key sysctl objects */#define IPSECCTL_STATS 1 /* stats */#define IPSECCTL_DEF_POLICY 2#define IPSECCTL_DEF_ESP_TRANSLEV 3 /* int; ESP transport mode */#define IPSECCTL_DEF_ESP_NETLEV 4 /* int; ESP tunnel mode */#define IPSECCTL_DEF_AH_TRANSLEV 5 /* int; AH transport mode */#define IPSECCTL_DEF_AH_NETLEV 6 /* int; AH tunnel mode */#if 0 /* obsolete, do not reuse */#define IPSECCTL_INBOUND_CALL_IKE 7#endif#define IPSECCTL_AH_CLEARTOS 8#define IPSECCTL_AH_OFFSETMASK 9#define IPSECCTL_DFBIT 10#define IPSECCTL_ECN 11#define IPSECCTL_DEBUG 12#define IPSECCTL_ESP_RANDPAD 13#define IPSECCTL_MAXID 14#define IPSECCTL_NAMES { \ { 0, 0 }, \ { 0, 0 }, \ { "def_policy", CTLTYPE_INT }, \ { "esp_trans_deflev", CTLTYPE_INT }, \ { "esp_net_deflev", CTLTYPE_INT }, \ { "ah_trans_deflev", CTLTYPE_INT }, \ { "ah_net_deflev", CTLTYPE_INT }, \ { 0, 0 }, \ { "ah_cleartos", CTLTYPE_INT }, \ { "ah_offsetmask", CTLTYPE_INT }, \ { "dfbit", CTLTYPE_INT }, \ { "ecn", CTLTYPE_INT }, \ { "debug", CTLTYPE_INT }, \ { "esp_randpad", CTLTYPE_INT }, \}#define IPSEC6CTL_NAMES { \ { 0, 0 }, \ { 0, 0 }, \ { "def_policy", CTLTYPE_INT }, \ { "esp_trans_deflev", CTLTYPE_INT }, \ { "esp_net_deflev", CTLTYPE_INT }, \ { "ah_trans_deflev", CTLTYPE_INT }, \ { "ah_net_deflev", CTLTYPE_INT }, \ { 0, 0 }, \ { 0, 0 }, \ { 0, 0 }, \ { 0, 0 }, \ { "ecn", CTLTYPE_INT }, \ { "debug", CTLTYPE_INT }, \ { "esp_randpad", CTLTYPE_INT }, \}#ifdef _KERNELstruct ipsec_output_state { struct mbuf *m; struct route *ro; struct sockaddr *dst;};struct ipsec_history { int ih_proto; u_int32_t ih_spi;};extern int ipsec_debug;extern struct ipsecstat ipsecstat;extern struct secpolicy ip4_def_policy;extern int ip4_esp_trans_deflev;extern int ip4_esp_net_deflev;extern int ip4_ah_trans_deflev;extern int ip4_ah_net_deflev;extern int ip4_ah_cleartos;extern int ip4_ah_offsetmask;extern int ip4_ipsec_dfbit;extern int ip4_ipsec_ecn;extern int ip4_esp_randpad;#define ipseclog(x) do { if (ipsec_debug) log x; } while (0)extern struct secpolicy *ipsec4_getpolicybysock __P((struct mbuf *, u_int, struct socket *, int *));extern struct secpolicy *ipsec4_getpolicybyaddr __P((struct mbuf *, u_int, int, int *));struct inpcb;extern int ipsec_init_policy __P((struct socket *so, struct inpcbpolicy **));extern int ipsec_copy_policy __P((struct inpcbpolicy *, struct inpcbpolicy *));extern u_int ipsec_get_reqlevel __P((struct ipsecrequest *));extern int ipsec4_set_policy __P((struct inpcb *inp, int optname, caddr_t request, size_t len, int priv));extern int ipsec4_get_policy __P((struct inpcb *inpcb, caddr_t request, size_t len, struct mbuf **mp));extern int ipsec4_delete_pcbpolicy __P((struct inpcb *));extern int ipsec4_in_reject_so __P((struct mbuf *, struct socket *));extern int ipsec4_in_reject __P((struct mbuf *, struct inpcb *));struct secas;struct tcpcb;extern int ipsec_chkreplay __P((u_int32_t, struct secasvar *));extern int ipsec_updatereplay __P((u_int32_t, struct secasvar *));extern size_t ipsec4_hdrsiz __P((struct mbuf *, u_int, struct inpcb *));extern size_t ipsec_hdrsiz_tcp __P((struct tcpcb *));struct ip;extern const char *ipsec4_logpacketstr __P((struct ip *, u_int32_t));extern const char *ipsec_logsastr __P((struct secasvar *));extern void ipsec_dumpmbuf __P((struct mbuf *));extern int ipsec4_output __P((struct ipsec_output_state *, struct secpolicy *, int));extern int ipsec4_tunnel_validate __P((struct mbuf *, int, u_int, struct secasvar *));extern struct mbuf *ipsec_copypkt __P((struct mbuf *));extern void ipsec_delaux __P((struct mbuf *));extern int ipsec_setsocket __P((struct mbuf *, struct socket *));extern struct socket *ipsec_getsocket __P((struct mbuf *));extern int ipsec_addhist __P((struct mbuf *, int, u_int32_t)); extern struct ipsec_history *ipsec_gethist __P((struct mbuf *, int *));extern void ipsec_clearhist __P((struct mbuf *));#endif /* _KERNEL */#ifndef _KERNELextern caddr_t ipsec_set_policy __P((char *, int));extern int ipsec_get_policylen __P((caddr_t));extern char *ipsec_dump_policy __P((caddr_t, char *));extern const char *ipsec_strerror __P((void));#endif /* !_KERNEL */#endif /* _NETINET6_IPSEC_H_ */
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -