usb_inc.h

PDIUSBD12与51接口的固件KEIL6.23调试通过

#include <stdio.h>
#include <string.h>
#include <At89x52.h>

//*************************************************************************
// basic #defines
//*************************************************************************

#define MAX_ENDPOINTS      (unsigned char)0x3


#define EP0_PACKET_SIZE    16


#define EP1_PACKET_SIZE    4


#define EP2_PACKET_SIZE    64


#define USB_IDLE           0
#define USB_TRANSMIT       1
#define USB_RECEIVE        2

#define USB_CLASS_CODE_TEST_CLASS_DEVICE                    0xdc
#define USB_SUBCLASS_CODE_TEST_CLASS_D12                    0xA0
#define USB_PROTOCOL_CODE_TEST_CLASS_D12                    0xB0

   //*************************************************************************
   // masks
   //*************************************************************************


#define USB_RECIPIENT            (unsigned char)0x1F
#define USB_RECIPIENT_DEVICE     (unsigned char)0x00
#define USB_RECIPIENT_INTERFACE  (unsigned char)0x01
#define USB_RECIPIENT_ENDPOINT   (unsigned char)0x02

#define USB_REQUEST_TYPE_MASK    (unsigned char)0x60
#define USB_STANDARD_REQUEST     (unsigned char)0x00
//#define USB_CLASS_REQUEST        (unsigned char)0x20
#define USB_VENDOR_REQUEST       (unsigned char)0x40

#define USB_REQUEST_MASK         (unsigned char)0x0F

#define DEVICE_ADDRESS_MASK      0x7F

/*
   //*************************************************************************
   // macros
   //*************************************************************************
*/
#define SWAP(x)   ((((x) & 0xFF) << 8) | (((x) >> 8) & 0xFF))

#define MSB(x)    (((x) >> 8) & 0xFF)
#define LSB(x)    ((x) & 0xFF)

#define FALSE   0
#define TRUE    (!FALSE)

#define DISABLE		EA=0
#define ENABLE		EA=1
/*
   //*************************************************************************
   // basic typedefs
   //*************************************************************************
*/
typedef unsigned char   UCHAR;
typedef unsigned short  USHORT;
typedef unsigned long   ULONG;
typedef unsigned char   BOOL;

/*
   //*************************************************************************
   // structure and union definitions
   //*************************************************************************
*/
typedef union _epp_flags
{
	struct _flags
	{
		unsigned char timer               	: 1;
		unsigned char bus_reset           	: 1;
		unsigned char suspend             	: 1;
		unsigned char setup_packet  	  	: 1;
		unsigned char remote_wakeup		   	: 1;
		unsigned char in_isr		      	: 1;
		unsigned char control_state			: 2;

		unsigned char configuration			: 1;
		unsigned char verbose				: 1;
		unsigned char ep1_rxdone			: 1;
		unsigned char setup_dma				: 2; // V2.3
		unsigned char dma_state      		: 2;
		unsigned char power_down			: 1; // Smart Board
	} bits;
	unsigned short value;
} EPPFLAGS;

typedef struct _device_request
{
	unsigned char bmRequestType;
	unsigned char bRequest;
	unsigned short wValue;
	unsigned short wIndex;
	unsigned short wLength;
} DEVICE_REQUEST;

typedef struct _IO_REQUEST {
	unsigned short	uAddressL;
	unsigned char	bAddressH;
	unsigned short	uSize;
	unsigned char	bCommand;
} IO_REQUEST, *PIO_REQUEST;

#define MAX_CONTROLDATA_SIZE	8

typedef struct _control_xfer
{
	DEVICE_REQUEST DeviceRequest;
	unsigned short wLength;
	unsigned short wCount;
	unsigned char * pData;
	unsigned char dataBuffer[MAX_CONTROLDATA_SIZE];
} CONTROL_XFER;

/*
   //*************************************************************************
   // USB utility functions
   //*************************************************************************
*/
//extern void D12_SetMode(unsigned char bConfig, unsigned char bClkDiv);
//extern void D12_SetDMA(unsigned char bMode);
//extern unsigned char D12_GetDMA(void);
//extern unsigned char D12_ReadEndpointStatus(unsigned char bEndp);
//extern void D12_SetEndpointStatus(unsigned char bEndp, unsigned char bStalled);
//extern void single_transmit(unsigned char * pData, unsigned char len);
//extern void stall_ep0(void);
//void D12_SendResume(void);

//#define IN_TOKEN_DMA 	1
//#define OUT_TOKEN_DMA 	0

#define DMA_BUFFER_SIZE		256

#define DMA_IDLE	0
#define DMA_RUNNING	1
#define DMA_PENDING	2

#define SETUP_DMA_REQUEST 		0x0471
#define GET_FIRMWARE_VERSION    0x0472
//#define GET_SET_TWAIN_REQUEST   0x0473
#define GET_BUFFER_SIZE		    0x0474
/*
typedef struct _TWAIN_FILEINFO {
	unsigned char	bPage;    // bPage bit 7 - 5 map to uSize bit 18 - 16
	unsigned char	uSizeH;    // uSize bit 15 - 8
	unsigned char	uSizeL;    // uSize bit 7 - 0
} TWAIN_FILEINFO, *PTWAIN_FILEINFO;
*/

//USB100.C-宏定义
//===============================================================
//===============================================================
#define MAXIMUM_USB_STRING_LENGTH 255

// values for the bits returned by the USB GET_STATUS command
#define USB_GETSTATUS_SELF_POWERED                0x01
#define USB_GETSTATUS_REMOTE_WAKEUP_ENABLED       0x02


#define USB_DEVICE_DESCRIPTOR_TYPE                0x01
#define USB_CONFIGURATION_DESCRIPTOR_TYPE         0x02
#define USB_STRING_DESCRIPTOR_TYPE                0x03
#define USB_INTERFACE_DESCRIPTOR_TYPE             0x04
#define USB_ENDPOINT_DESCRIPTOR_TYPE              0x05
#define USB_POWER_DESCRIPTOR_TYPE                 0x06

#define USB_DESCRIPTOR_MAKE_TYPE_AND_INDEX(d, i) ((USHORT)((USHORT)d<<8 | i))

//
// Values for bmAttributes field of an
// endpoint descriptor
//

#define USB_ENDPOINT_TYPE_MASK                    0x03

#define USB_ENDPOINT_TYPE_CONTROL                 0x00
#define USB_ENDPOINT_TYPE_ISOCHRONOUS             0x01
#define USB_ENDPOINT_TYPE_BULK                    0x02
#define USB_ENDPOINT_TYPE_INTERRUPT               0x03


//
// definitions for bits in the bmAttributes field of a
// configuration descriptor.
//
#define USB_CONFIG_POWERED_MASK                   0xc0

#define USB_CONFIG_BUS_POWERED                    0x80
#define USB_CONFIG_SELF_POWERED                   0x40
#define USB_CONFIG_REMOTE_WAKEUP                  0x20

//
// Endpoint direction bit, stored in address
//

#define USB_ENDPOINT_DIRECTION_MASK               0x80

// test direction bit in the bEndpointAddress field of
// an endpoint descriptor.
#define USB_ENDPOINT_DIRECTION_OUT(addr)          (!((addr) & USB_ENDPOINT_DIRECTION_MASK))
#define USB_ENDPOINT_DIRECTION_IN(addr)           ((addr) & USB_ENDPOINT_DIRECTION_MASK)

//
// USB defined request codes
// see chapter 9 of the USB 1.0 specifcation for
// more information.
//

// These are the correct values based on the USB 1.0
// specification

#define USB_REQUEST_GET_STATUS                    0x00
#define USB_REQUEST_CLEAR_FEATURE                 0x01

#define USB_REQUEST_SET_FEATURE                   0x03

#define USB_REQUEST_SET_ADDRESS                   0x05
#define USB_REQUEST_GET_DESCRIPTOR                0x06
#define USB_REQUEST_SET_DESCRIPTOR                0x07
#define USB_REQUEST_GET_CONFIGURATION             0x08
#define USB_REQUEST_SET_CONFIGURATION             0x09
#define USB_REQUEST_GET_INTERFACE                 0x0A
#define USB_REQUEST_SET_INTERFACE                 0x0B
#define USB_REQUEST_SYNC_FRAME                    0x0C


//
// defined USB device classes
//


#define USB_DEVICE_CLASS_RESERVED           0x00
#define USB_DEVICE_CLASS_AUDIO              0x01
#define USB_DEVICE_CLASS_COMMUNICATIONS     0x02
#define USB_DEVICE_CLASS_HUMAN_INTERFACE    0x03
#define USB_DEVICE_CLASS_MONITOR            0x04
#define USB_DEVICE_CLASS_PHYSICAL_INTERFACE 0x05
#define USB_DEVICE_CLASS_POWER              0x06
#define USB_DEVICE_CLASS_PRINTER            0x07
#define USB_DEVICE_CLASS_STORAGE            0x08
#define USB_DEVICE_CLASS_HUB                0x09
#define USB_DEVICE_CLASS_VENDOR_SPECIFIC    0xFF

//
// USB defined Feature selectors
//

#define USB_FEATURE_ENDPOINT_STALL          0x0000
#define USB_FEATURE_REMOTE_WAKEUP           0x0001
#define USB_FEATURE_POWER_D0                0x0002
#define USB_FEATURE_POWER_D1                0x0003
#define USB_FEATURE_POWER_D2                0x0004
#define USB_FEATURE_POWER_D3                0x0005

typedef struct _USB_DEVICE_DESCRIPTOR {
    UCHAR bLength;
    UCHAR bDescriptorType;
    USHORT bcdUSB;
    UCHAR bDeviceClass;
    UCHAR bDeviceSubClass;
    UCHAR bDeviceProtocol;
    UCHAR bMaxPacketSize0;
    USHORT idVendor;
    USHORT idProduct;
    USHORT bcdDevice;
    UCHAR iManufacturer;
    UCHAR iProduct;
    UCHAR iSerialNumber;
    UCHAR bNumConfigurations;
} USB_DEVICE_DESCRIPTOR, *PUSB_DEVICE_DESCRIPTOR;

typedef struct _USB_ENDPOINT_DESCRIPTOR {
    UCHAR bLength;
    UCHAR bDescriptorType;
    UCHAR bEndpointAddress;
    UCHAR bmAttributes;
    USHORT wMaxPacketSize;
    UCHAR bInterval;
} USB_ENDPOINT_DESCRIPTOR, *PUSB_ENDPOINT_DESCRIPTOR;

//
// values for bmAttributes Field in
// USB_CONFIGURATION_DESCRIPTOR
//

#define BUS_POWERED                           0x80
#define SELF_POWERED                          0x40
#define REMOTE_WAKEUP                         0x20

typedef struct _USB_CONFIGURATION_DESCRIPTOR {
    UCHAR bLength;
    UCHAR bDescriptorType;
    USHORT wTotalLength;
    UCHAR bNumInterfaces;
    UCHAR bConfigurationValue;
    UCHAR iConfiguration;
    UCHAR bmAttributes;
    UCHAR MaxPower;
} USB_CONFIGURATION_DESCRIPTOR, *PUSB_CONFIGURATION_DESCRIPTOR;

typedef struct _USB_INTERFACE_DESCRIPTOR {
    UCHAR bLength;
    UCHAR bDescriptorType;
    UCHAR bInterfaceNumber;
    UCHAR bAlternateSetting;
    UCHAR bNumEndpoints;
    UCHAR bInterfaceClass;
    UCHAR bInterfaceSubClass;
    UCHAR bInterfaceProtocol;
    UCHAR iInterface;
} USB_INTERFACE_DESCRIPTOR, *PUSB_INTERFACE_DESCRIPTOR;